Results 1 to 2 of 2
10-18-2012, 05:13 PM #1
- Join Date
- Oct 2012
- Kinder, Louisiana
- Zetor 5211
I am having trouble engaging the hydraulics to raise the rear lift arms. I am confused with the position of the levers on the floor between my feet. The tractor PTO has worked in the past as well as the lift arms for implements in the rear and I am not sure what is wrong. We replaced the hydraulic pump, thinking that was the problem but there has been no change in operation and the lift still doesn't work. Also, the two levers I am talking about are loose and sloppy. Is something broken in there?
10-18-2012 05:13 PM # ADSAdvertisement
- Join Date
- Mar 1998
- Register now to remove this ad.
10-19-2012, 07:45 PM #2
Re: Hydraulic system
The hydraulic pump is in the bottom right rear of the housing so you pulled the seat and top cover of the housing off to get to the pump. I have never seen a pump bad but it could happen. Does the pto clutch lever work correctly. Are you pulling it up and does it lock in place before you try to move the lever.
Remember the right lever is high and low on the transmission and only the left is PTO and hydraulic engagement.
By Piper Pacer in forum New Holland Owning/OperatingReplies: 6Last Post: 03-21-2011, 09:04 PM
By GLLinMO in forum Kubota Owning/OperatingReplies: 8Last Post: 08-22-2010, 06:13 PM
By NCMau in forum Massey Ferguson Owning/OperatingReplies: 0Last Post: 06-30-2010, 08:50 AM
By lhfarm in forum HydraulicsReplies: 7Last Post: 08-28-2005, 11:04 AM
By lhfarm in forum Parts/RepairsReplies: 7Last Post: 08-28-2005, 11:04 AM