Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Jul 2010
    Posts
    2
    Tractor
    Wheel Horse 520-H

    Default Zetor 6245 clutch cylinder

    Hey guys, last week I bought a used 6245 with 300hrs, from a small town that was selling surplus equipment.
    Before buying the tractor I knew the clutch cylinder was not working, however the clutch itself is fine. From what I've read, this is a fairly common problem with these tractors. There is some minor rust on the plunger in the slave cylinder, which I assume is from the slave cylinder leaking.
    My questions are,
    1- Should I replace the cylinder or try to bleed it ?
    2-Where do you bleed it & where do you fill the reservoir ?




  2. #2
    Platinum Member rScotty's Avatar
    Join Date
    Apr 2001
    Posts
    977
    Location
    Rural mountains - Colorado
    Tractor
    Many in the past. Today, a Kubota M59, JD530, 2 Yanmars - 16 & 33 hp, & a JD310SG

    Default Re: Zetor 6245 clutch cylinder

    Great tractors. You'll like it. Yes, the master and slave cylinders on some old ones had that rust problem and also problems with the sealing rings internal. Given the sophistication of the rest of the tractor and the normal reliability of hydraulics it does seem odd that this happened to them. But I'd replace it and here's why: Zetor has always had a policy of constantly upgrading their basic design and making the new parts backwards compatible. That's darn near unique in manufacturing today, and worth taking advantage of. So if it was me I'd just get a set of new ones and make sure they are the latest type.
    good luck, rScotty

  3. #3
    Advertiser sweettractors's Avatar
    Join Date
    Jul 2003
    Posts
    7,148
    Location
    Central Kentucky
    Tractor
    JD 6403 CHA-JD 3130 CHA

    Default Re: Zetor 6245 clutch cylinder

    If you need those new, I think I can take care of that? Ken Sweet
    http://www.sweetfarms.com/

    Sweet Farm Equipment LLC (Internet Sales, Shipping All States)
    Shipping Facility
    1815 Defries Rd., Canmer, Ky 42722 Toll Free 1-866-528-3323
    Ken Sweet sweet@scrtc.com

    Shipping Example: Can ship 800 lbs from Ky. to Dallas for $165
    The Northeast shipping corridor is a little more expensive.

Similar Threads

  1. Dual/Single clutch question for Reg or anyone
    By NCMau in forum Massey Ferguson Owning/Operating
    Replies: 2
    Last Post: 01-27-2010, 01:43 PM
  2. Why use clutch with GST?
    By Jay4200 in forum Kubota Owning/Operating
    Replies: 40
    Last Post: 10-09-2006, 01:32 PM
  3. Dealer Big Dealer Problem - Replacement Clutch - help
    By MikeLonghurst in forum Chinese Tractors
    Replies: 2
    Last Post: 03-09-2006, 06:57 AM
  4. clutch
    By vaughan in forum Kubota Owning/Operating
    Replies: 3
    Last Post: 10-19-2002, 09:11 PM
  5. Clutch...what is it good for?
    By fredoroberts in forum Kubota Owning/Operating
    Replies: 24
    Last Post: 06-30-2000, 01:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.