Old OEM Kubota Front Halogen Work Lights

[aczlan]

Yes, In case I ever want to go back, particularly if/when I sell the tractor.
I have an aversion to cutting perfectly good connections.
But I'll do what I gotta do, if I can't find a couple more connectors.

Still trying to figure out why you would want to...
Given that LED output decreases over time and costs (for the same quality) are going down as well, why would you want to go back to incandescent lights, or move your LEDs to a new tractor?
IMO, it would be a selling point to have LEDs rather than incandescent work lights.
As I said, post pictures of the pins and we might be able to help.



Aaron Z

 

[downsizingnow48]

I took note of Fallon's use of the Deutsch connectors. I think LEDs with Deutsch connectors would be a selling point vs the ad hoc hook ups generally found. Or the OEM lights for that matter. I have four of the OEM work lights on my B21, they are OK on a clear evening for working right in front or behind the tractor. I get by. But in any kind of weather, or navigating across a distance, they are not much help.

 

[tjkubota93]

Just get some scotch locks aka suitcase connectors. LOL

I can honestly say those do not have a legitimate use on anything.

 

[aczlan]

Just get some scotch locks aka suitcase connectors. LOL

I can honestly say those do not have a legitimate use on anything.

They are good for making the next guy to work on something hate your guts...

Aaron Z

 

[fender76]

I cannot post a link, but if you will call 1 844 255-5899, they will supply the web address. You will need to provide clear, close-up images of the inside of your female connector & the outside.

 

[TimP]

I cannot post a link, but if you will call 1 844 255-5899, they will supply the web address. You will need to provide clear, close-up images of the inside of your female connector & the outside.

I haven't had a chance to open up the connectors and take a close-up, but will ASAP.

I had taken some a few months back, but didn't realize they were very blurry so I need to re-do the Pics.

Thanks !

 

[Ford850]

I cannot post a link, but if you will call 1 844 255-5899, they will supply the web address. You will need to provide clear, close-up images of the inside of your female connector & the outside.

That's a great resource! Here's the link Shop Automotive Connectors - Pigtails at FindPigtails.com

 

[tjkubota93]

They are good for making the next guy to work on something hate your guts...

Aaron Z

I guess they legitimately do that. I have cursed over them many times. I used them one time when I was 14 or 15. Didn't like the result and never used them again. I have removed many.

 

[TimP]

Hi All.

I got a chance to take some close-up pictures of the connectors. I have attached them.

Please let me know if you think you have seen these anywhere.

I am going to try the companies that you all gave me the numbers to, to see if they can help since I have the pics now.

Thanks again everyone !

 

[1930]

Good luck, hardest part is finding someone that understands this is what you need regardless of what they feel you could just make out with.

Been there too many times myself