Recent content by big red 18

  1. B

    220d crank nut torque

    Older 220d was leaking oil, crank seal and water pump was leaking What is the crank nut torque
  2. B

    Tire size does it matter

    Ym220d has 7x14 ag and 11.2x24 but my fronts are dry cracked bad And the normal size is 6x14. Can I use 7x14 and should I tube the tires and 4 or 6 ply
  3. B

    Tire Selection  Ym220d

    What size do I need for my 220d 4x4. It has 7x14 at on the front and 11.2 x24. The fronts are dry cracked bad. And should I go 6 ply with tubes or not ??
  4. B

    The best way to connect

    I have a Wallenstein log splitter and a Yanmar 220d. What is the best way to connect. I知 using the out or the A port from the tractor to the in on the splitter But I was going to use the B port or inlet but is this the correct or run it to PBY
  5. B

    Hydraulic issue !!

    I have a 220d with loader that is working but my 3pt is not working. Stuck or ? The hydraulics pump is stuck or something. It sounds like it's straining and the engine surges when using the loader
  6. B

    Pump and reservoir size

    I have an 220d yanmar and I'm setting up a pto pump for a log splitter. I was thinking 4 to 5 gallon reservoir. 2250 psi 18gph pump. Any thoughts. Thanks
  7. B

    Rear hydro

    Hello I have a older yanmar 220D with a loader and I'm trying to set up rear hydraulics for log splitter. The loader is using 2 ports on the control valve. What are my options. I want to run both if possible. Thank
  8. B

    Rear hydraulic

    Yanmar 220D with loader I'm trying to setup rear hydraulic but the 2 ports on the control valve are being used by the loader. Any other way of doing this?
  9. B

    Rear hydraulic

    220D that has a loader but I want to add rear hydraulic for a log splitter. The 2 port on the control valve are used by the loader Any other options?
Top