Just be careful what unit type/brand you buy. If it has copper heating and cooling lines for the heat exchanger you will be replacing it in 5 years or so. Freon does not like copper and it will erode the copper eventually and put pin holes in the systems copper lines. Some manufacturers brag...
I have spacers on my massey 1723E (similar in size to your 1025R) plus I have the wheels fluid filled. This helps quite a bit and feels more solid on the slopes.
I tested it on the slopes I mow by rocking it back and forth to see what it would do (nothing was on fellas). It did great but get...
Thanks everyone, sold it yesterday. That was that last remaining parts I had left from my old power Trac. I hope all your power Tracs are working well for you.
I still have the above front loader bracket and I also have 4 of the smaller female hydraulic connectors all for $50. I want them gone. If I don't hear anything from this forum I am just going to scrap it at the metal recycling because I have no use for it. Contact me if your interested. It is...
Once someone places an order do they ever call the customer? I placed an order and got the order confirmation, is that all there is. I gave all the information they asked, for the wicked tooth bar from the video Travis made. Is that it until I receive it delivered to my home?
I see you posted this awhile ago. I replaced all my bulbs with LEDs. They use 12 volt bayonet type. You will have to match up the bayonet style to the type of bulbs you will need. I think some of mine took 1157 style bulbs. I got some for my headlights but wish they were brighter. If you have a...
I am on paved surfaces and I didn稚 notice any slippage. I don稚 have a backhoe but my rear tires are filled. I have a front snow plow on my front end loader. I was pushing about 9 inches of snow.
I got a pack of 12 blades and only used one. That groover gets pretty hot so wear protective...
Yeah had a bit of light in my eyes too so I put some blinders on them. I love the led lighting though.I don’t have a lot of money invested in them so I won’t be crying if I break one. The turn signals would be another story.
When I moved my turn signals to the inside I made two small brackets and mounted them over the old lighting holes using existing hardware. I added LED lights to the outside of the rops and boy are they bright. $17 for a pair off of eBay so not worried if I break or damage them being on the...
This is what I made for my power Trac when I had it. The attachment plate has since been cut off and the forks welded to a SSQA plate so the THUMB can be used on it. It is made so the grapple is removable.
I also looked at all the same brands you did plus one more, the RK models - I just can稚 get past their FEL control lever. It just looks like an after thought. I had the Kioti as my first choice but the dealer refused to put a SSQA on the FEL and really didn稚 know anything about a third...
This is my setup, my plow has a wheel kit installed on it from the manufacturer. It also has a Kevlar rubber lip kit on the cutting edge. It’s has been on there for ten years now and it still doesn’t need to be flipped over and use the other side edge. I converted it over this year for my new...