Recent content by davesteve

MAF sensor was OK. I finally got hold of a service manual. I see now why dealers don't want you to have them. It makes the tractor too easy to diagnose. Traced the power wire from the MAF sensor back to the ECU, then back towards the fuse box under dash. There is a plate attached to the exhaust...

Thanks. I changed filters recently. Just cleaned the air filter/housing. Took off all the grounds and cleaned them. Did the fuel pump air release thing. Checked wires, couldn't see anything weird. I hooked up an ELM327, with Torque Lite App and it gave me codes, P0371 - Generic Type...

It's a 10 Amp fuse. Second one down on the right hand side of fuse box. Have not had any problems with the tractor since I bought it new in 2016. Seems to go out when front loader is being used and it seems to be when tractor is on a decline towards the front. It gives F03 (132), F04 (1076) and...

Just wondered if anybody has these on an XR. They look very impressive, but... I put a set on the rear tires, 43-16x20 and they are hitting on the inside part of the fender/body. Not above the tire, but on the inner side. Seems to be a little vertical steel lip on a plate that attaches to the...

Just had my XR3135h to the dealer. I bought it in April new. Has 130 hrs now, but it shot me a F11 (81) code at about 80 hrs. It happened right after a regen. By the way, it's first regen was at 14hrs??? and have had several more at strange times, so the every 50 hr thing is myth, but that's...

I'll tell you my story. You choose if you want to avoid Barton tractor or not. So I'm looking for filters for the first time and I find alternatives (cheaper) for the LS filters thru Wix, etc. But I can't find a cheaper HST Filter for whatever reason. A few places list the OEM LS filter for HST...

Tough choice here: -------------------------------LS XR3135H------------Mahindra 1538HST HP-------------------------------35 turbo-auto-----------38.7 auto PTO HP-------------------------Independent/ 28--------Independent/ 27.7 Disp.-----------------------------114.7---------------------166.7...

Hello, $21,950 plus tax (w/loader) Does that sound about right? Or should I wait for 2016's? Will that be January 2016? Probably a higher price for 2016, right? New to the "real" tractor world, so ...:confused: Probably won't use it too much until the Spring. Wouldn't mind getting the 2015 if...