Recent content by deelowe

Thanks! Finally managed to get a full weekend of use out of it and everything is working fine now.

Issue was the hoses being reversed. Wr long sent me install pics with power beyond ran to t port when it should be p.

Solenoid is cutting off when I release the switch. I can hear it click. Could it be something else? What about the power beyond? Should I try reversing the 3rd function hoses?

Would it happen if the power beyond hoses were reversed? Wr long shows it both ways in their instructions and I may have them backwards.

I’m guessing it’s the relief. I wouldn’t know for sure. How do I check?

Lown performance seems to make them. Pricey but they are really nice. I was super pleased with the kit I got for my mx.

Just got my grapple hooked up. When testing it, I noticed the hydraulic pump whines when the grapple is fully closed. If I bump it open a little, it goes away. I assume this is due to pressure from the grapple. 3rd function is wr long. Grapple is mtl rg-7. Is this normal? Do I need to make...

For reference I went with a woods 72.50. It was either that or an rc cutter that I’m afraid I’d tear up in the woods around my property. Would have rather gotten a 72.30 as the .50 is a bit heavy for my tractor, but the .30 wasn’t available.

Oh, I see. I’m just trying to avoid splicing wires. I guess I just need to find the right land pride cable part number.

This is an accessory plug according to the kubota manual. I can only assume it’s for a factory or land pride 3rd function. It’s only one side of the connector. The black round plugs are rubber and just there to keep the dust out. I’m not sure what you mean by it not doing me any good. My plan is...

I’m in the process of installing a w r long 3rd function and would like to use the factory loader accessory plug for supplying power to the solenoid switch. Anyone know what kind of plug this is or where I can find one?

Not titan attachments. Titan implements, just to clarify.

Nice. Anyone have thoughts on the titan 1606?

Thanks for all the feedback. To be clear, I don't plan to clear the woods with the cutter. It's just that I don't want something that'll get damaged from using it in heavy brush. After talking to my local dealers and what they have in stock, here are the models I'm considering: - Titan 1606 -...

Thank you for all the feedback. My options right now given current inventory are a light duty 2" cutter or heavy duty 4" models. Given that I'll be clearing in the woods, I assumed going with a heavier duty couldn't hurt. I don't plan to cut 4 inch trees with it. :-)