houska's latest activity

That's a great improvement. If mine had offered that, I might still have it. That said, the way a miniex can move is amazing and no...

I had a tractor backhoe for 4 years, sold it, and bought a mini-ex. As a very general rule of thumb, the bucket breakout force of a...

Thats $7200 USD installed which is typically what they are here - also make sure if includes the subframe, For the same or less money...

Not quite a direct answer to your question, but in Eastern Ontario I sold my BH860 backhoe on consignment at the dealer for C$7,900 last...

I’ve got quite a few hours operating a mini ex shear mostly in my orchard. My need was to reduce the size of some older overgrown sweet...

Both great in theory. And in practice too, if trees are sparse so you can drop it where it wants to go (chainsaw), push it away from you...

No experience with this style shear but have seen shear on skid steers that leave a sharp edge on the cut which cuts tires, people, etc...

Anyone with experience running a small-ish tree shear on a mid-sized miniexcavator? After a few days of bashing in forest trails with...

it was easier than I thought it would be. took me an hour or so.

@herm0016, I'll be doing the same on by Branson 4225h this spring, for the very same reason, per the advice given to me at Narrowing 3ph...

Can you turn the pins inward on your implement instead of having them point outward? Most can be installed either way and that makes a...

Are your rear wheels set out all the way now? They can have 4 different spacings set up on the rear wheels. Center hub offset "in" +...

Nice one. I'm not sure, I will check. Unfortunately not, at least not the logging winch. 26 1/4" is the inside position. The outside...

I have a Branson 4225H. With it I use some attachments whose 3ph mounting pin spread is pretty wide, for instance a logging winch that...