Recent content by jasonf

Guys: I am having a problem with my B2710: Sunday I connected my KK bush hog to my 3 PH and lifted it off it's storage pallet. I moved it to the driveway and move the 3 PH position control valve from full up to full down, like a knucklehead. The hog came crashing down onto the driveway, and...

Guys: I am having aproblem with my B2710: Sunday I connected my KK bush hog to my 3 PH and lifted it off it's storage pallet. I moved it to the driveway and move the 3 PH position control valve from full up to full down, like a knucklehead. The hog came crashing down onto the driveway, and...

OK Guys attached is what I woke up to this morning. Easily over 2 feet. But the 2710 and I are up to the task here are the before pictures, we will see what the after looks like...

Guys: Here is the situation. I have a 1 inch plastic pipe going to the barn. I want to do the following: Hot water, Cold water and Warm water. I have the hot and cold lines in the Mobile home, and a 4 pair of wire between the barn and the Mobile home. My problem is I need a solenoid operated...

Since winter is upon us here in the Northeast with a vengeance, I thought I would add a link to my Hydraulic chute rotator project. I created this last year and it works very well. So far I have not had any problems with the motor that I bought from Northern Hydraulics. It remains more than...

Guys: Hanging over my doorway is a huger spider. She is the size of a dime and is all black except for a bright yellow diamond on her body. She has a large grey ball that I think is an egg sack. I have never seen one like this before and was wondering if it was a black widow spider of not...

Now I have gone AND DONE IT...... I went and got a KingKutter 5' rotary cutter and got it home and the paint finish on this thing is a joke. Some spots have paint sags from being sprayed too heavily, while other parts are barely covered with paint. The instructions that come with it...

OK boys: I have a firm price of around $950 for a Bush Hog SQ-600 Brush Hog and I want some opinions on whether I should go with a 60" KingKutter instead. I think the Kingkutters are around $200-300 cheaper. Does anybody out there have a KK and how well is it built and how well is it...

OK Guys: Here is my problem. I have a 5 year old single wide Fleetwood Mobile home with a galvanized roof. Each panel is about 5 foot wide by 30 foot long. The panels are joined together by a flat cap that is shaped like a big staple and it is crimped onto where the 2 sheets join...

Were any of the TBN's at either of the auction last weekend in Upstate NY, Either Macfaddens or Salem ? I went to both and Salem's was very disappointing . I then drove to Sharon Springs and Macfaddens was much better. By the time I got there they were half way tru. And of course I missed...

My 2710 headlights are the stock 27W type. I have been reading on the message board that there are brighter bulbs available from Autozone. But they have changed their supplier of the bulbs. They were called Night Blaster, stock number 702 (35W) and 701 (50W). They are now Pro Series from...

I have gone ahead and made my hydraulic Chute rotator for my BL2750 Snowblower for my B2710. I bought a hydraulic motor from Northern Tool for $157 and had hoses with couplings made up for another $130. $10 for scrap metal and I have completed it in about 5 hours. I have put it on this past...

I am going ahead with my threat to make a hydraulic chute rotator for my B2772 63" Front mounted blower. The kit is $595 plus tax. I have a hydraulic motor in mind. I have machined a bolt onto the worm gear and used a torque wrench to manually spin the chute. It looks like it takes about 100...

The \'BEST\' Backhoe I'm almost afraid to ask this question, because there indeed may be no real 'right' answer, but here goes. I bought a 2710 this fall and now that tax time is over I want a backhoe. I realize that I can't have a CAT backhoe, but maybe a WOODS 7500 type/size would be...

I have a Kubota front mounted snowblower attachment that has hand crank chute rotation. I want to make it hydraulic, but Kubota wants $595 for the hydraulic kit. This is way too expensive. I want to either buy another manufacturer's kit or make one myself. Does anyone know of a supplier of...