jaxs's latest activity

  • J
    jaxs replied to the thread How to repair tire?.
    That can't be plugged but can be repaired from inside and last the life of tire. Take it to a tire shop that sell's and repair's farm...
  • J
    After making this list can we name all landscape plants suitable for zone 7? BTW Calg it is neither. It's boom mounted. :rolleyes:
  • J
    jaxs replied to the thread Goats ate the invasives.
    Some large cattle ranches in Tx keep,rent or free graze goats to improve grass for their cows. Various breeds show this trait in...
  • J
    jaxs replied to the thread Oxy regulator repair.
    There's a lot of regulators being misrepersented through deceptive wording in discription. It easy to believe you are buying Victor or...
  • J
    jaxs replied to the thread Kawasaki Mule Air Cleaner Cleaning.
    My Portor Cable Pancake build's 125psi which is more than adiquate to blow dirt out of dry filters. On extra large and dirty you might...
  • J
    The hook is a sloppy fit and those pins wouldn't make me feel any more secure. OP's experience in having pins to become damaged with...
  • J
    jaxs replied to the thread X-cord for welder.
    That's right,and the rathe of lawyers could be on the owner/electrician because the sign prove's they knew the plug posed a risk.
  • J
    jaxs replied to the thread Breaking up very hard dirt clods..
    There are clays,then there are clays that have little in common with other clays. I have lived and worked with black clay in N.Texas...
  • J
    jaxs replied to the thread Bushing Size.
    What always works for me is to remove worn bushing then measure bore and shaft of what it fit's. There's other ways but none are as...
  • J
    jaxs replied to the thread X-cord for welder.
    I see where you are coming from. Another example of common sense and experience proving engineers and popular belief to be wrong is...
  • J
    jaxs replied to the thread B7800 gets hot after about a hour..
    5' is too large in anything other than sparse weeds. Regardless of reason,you should address it before ruining the engine. Diesel will...
  • J
    jaxs replied to the thread X-cord for welder.
    Reading what some people say about electricity is proof that a little knowledge is more dangerous than no knowledge at all.
  • J
    If you are talking about the fixed belly mount drawbar,just don't exceed rated tongue weight and you'll be fine. If you are refering to...
  • J
    PM me if you don't figure it out,I might be able to take a look if you want.
  • J
    jaxs replied to the thread Slow leak in rear tire.
    Most my tractor tires have had tubes but I've repaired and hired many tubless truck and trailer tires repaired. My experience has been...
 
Top