Recent content by jloven

As others have already said, the best option is to go to the auction site and try it before you buy it. However, like you, most auctions are too far away from me to travel to inspect and hang around until the next day to take a chance on placing a winning bid. I have had good luck in the past...

jd110, I know it s a long shot, but do you have a similar hydraulic diagram for the 4720 open station? I already have the 3rd SCV and PB kits installed on my 2013 open station 4720. I picked up the LVA26037 kit for the 4th and 5th last weekend. Tried to hook it up last night, but the oil...

I had a Tc45d with the same problem. The floor rusted out, especially around the step area. I ended up finding one at a junk yard in Alabama. They strapped it to a pallet and shipped it to me. I think it was $400 or so for everything. They sent me some pics to verify it was in much better shape...

You were spot on Kyle. After some deliberation decided to tear into this repair this weekend. I removed the rear tire and cover place. After marking all the hydraulic lines and taking some pictures, I removed all the lines that were connected to the rockshaft manifold. I then removed the...

I’m looking for feedback on discbines / mower / conditioners. I have used a new idea 5209 for the last 15 years and I’m thinking about trading in for a new machine. New Holland and John Deere both about an hour away. Kubota, Massey and Kuhn as well. Need 9-10 foot cut and rubber rollers. Thanks

I wanted to see if anyone had any advice or experience in replacing a 3 spool valve with a 4 spool valve? I have a 2007 cab 4720 and seem to have plenty of room to remove the current 3 spool valve and add a 4 spool valve like this one (FPS 41398 L239 4 Position Manual Hydraulic Spool Valve...

Can anyone recommend a good seeder that will seed in tilled ground and also oversees existing meadows? I can get a used Woods PSS72 or a Landpride APS1572 for around $5k. Both seem to be the same machine. Are they worth the money? Have found a JD OS 1058 overseeder. Also looked at some more...

New Holland (TC4D) - 4 CYL COMPACT TRACTOR - NORTH AMERICA (11/98-12/5) Parts Diagrams Here is the link to the Hydro pedal diagram at Messicks. And here is the actual image. Loosen bolt #7 and rotate #19 to re-center the pedals. It is a bit of trial and error but after 3 -4 attempts you...

Does anyone know why my rpm is limited in cold weather? Last week temps were in low teens and tractor would not go above 1500 RPM for almost 20 minutes. After that it went to 2000 rpm.

Looking to upgrade to either a T5070 or a T4-110. The T5070 is a 2012 with 400 hours, T4-110 has 300 hours on it, 2016 model. Both are priced the same. I like the fact that the 5070 is pre TIER 4. Other than that, is there much difference? I'm just not that familiar with the T5070, I have...

Seems I have a significant leak under my TC45D tractor. Upon examination it is coming from where the rear end of the tractor bolts up to the transmission. it is definitely coming out of the bottom. Sides and top are dry. Attached is a picture of the puddle it has made in 48 hours. Any way...

Ok, after evening in my shop I think I have the answers to my questions. Just posting the results so the next person might bypass some of the time consuming process of figuring similar issues out. First, the problem with the engine turning over but not firing was a problem with the seat bypass...

I recently purchased a 2001 TC45 with 950 hours. It was in need of some Basic repair. The tilt steering would not work but fixed with a new gas shock. The other two issues were the hydro wants to creep in the forward position and the platform was in need of replacement. The tractor ran fine and...

Looking for suggestions on a quality net wrap for a NH BR7060 baler I recently purchased. What brand and best place to get it?? Rural king has Bale Lok brand and Agrisupply has Tama wrap. NH dealer of course but much higher cost.

Anyone have any advice on adjusting the parking brake on my 4720? I can pull mine all the way up very easy and tops out It holds ok but really needs a little more I think. Do I have to pull the rear tire?