Recent content by kruszert

  1. K

    Hydraulic Motor for Chipper Feed

    Feed system update: I got the parts in - - motor, flow control valve and valve. After looking at the valve and the way it operated I could not figure out how it would work in my system so I returned it and ordered Surplus Center valve 9-8464. I will not be able to reverse the motor. It will just...
  2. K

    Hydraulic Motor for Chipper Feed

    Thanks again for the responses. Aaron thank you, thank you thank you!!!- - the motor, flow divider and control valve are on order. I am curious about the control valve - - would it be an on /off switch or reverser? I was just going to use the flow divider lever to stop the feed drum. As for GPM...
  3. K

    Hydraulic Motor for Chipper Feed

    I have a Jinma chipper which has mechanical feed. The feed system is the weak link on this chipper IMO. I just broke the third gearbox after 1 hour chipping - - four inch max branches. At $200 per gearbox I need to do something else! I would like to drive the feed drum using a hydraulic motor...
  4. K

    Hydraulic Motor Help

    I am new to hydraulic motors and know little about them other than what I have picked up from reading past posts on this forum so please excuse some dumb questions. To give some background - - I have a 6" Jinma chipper. The chipper works well for my needs but the feed system does not. I made a...
  5. K

    Tractor implements made of stainless steel

    some stainless does rust - - - but - - - trailer is 10 years old, kept outside, 304 stainless steel from scrap yard, welded with both mig and tig low carbon rod/wire
  6. K

    Power Rake Project

    I am just getting started putting a parts list together to make a power rake similar to a harley rake or scape rake by ATI. After pricing used ones I realized I couldn't justify or afford the real thing but I think I can build one that will work. I have been through past posts by Spudland Dave...
  7. K

    Stump Grinder Finished

    I finally finished my stump grinder - - - and it actually works! No major problems, no rebuilt. One learning - - -position the tractor upwind when grinding!:o Reggie
  8. K

    Flail Mower  Flail Mower Height Adjustment

    I recently bought a Bush Hog flail mower - - an older model. It's in great shape but I couldn't figure out how to adjust the mowing height. I bought a parts manual off ebay and have learned that this model had wheels mounted on a steel tube on the back. It has the steel tube running across the...
  9. K

    Mowing  DK-35 Flail Mower Size

    There is a 7' woods flail mower for sale locally and I am wondering if my DK-35has enough horsepower to run this size mower. I think I have around 30hp at the PTO. Reggie
  10. K

    PTO Stump Grinder

    I am getting parts together for make a PTO stump grinder similar in design to the Worksaver SG-26. I have most of the main parts, wheel, gearbox, hydraulic cylinder, I have the specs and parts diagram for the Worksaver but it would be helpful if someone who actually has a Worksaver could give me...
  11. K

    Mowing  Flail Mower for DK35

    First I should say that I am new to this forum and to tracors (unless you count a 1954 Farmall Cub). I purchased a new DK35 in Feb. of this year with backhoe and loader with 4 way bucket. Added a tooth bar after reading comments on this forum. The DK35 started out being a big disappointment - -...
Top