Recent content by Massey1010

I'm hoping someone can answer my question on the hydrostatic pedal pivot. Does it have a bushing or is the pivot one solid piece? Anyone have a parts breakdown? Joe

I brought my CK20 HST in to do maintenance and jacked the front end up. I spun the tires by hand and the gears sound really loud. Is this normal?

While moving some concrete in the bucket I lowered the 3pt and now it won't lift. I had to unhook the implement on the back to put the tractor back in the barn. I do not have remotes nor have I ever hooked up any hydraulic implements. I tried turning the drop valve either way but no change...

I have a self feeding Wallenstein BX62. I was wondering if it is possible to add an automatic feed to this unit?

Was brush hogging and the next thing I new my CK20 was blowing steam. I immediately shut it off and let it sit awhile. I figured that the radiator screen had gotten clogged but turns out the belt had come off. Did I do any damage to my tractor? Is the belt something I can get locally or do I...

I think I have a problem with the FEL on my CK20HST. While using it the bucket will tilt down fast enough that I have to keep tilting it back up. This is especially a problem when I'm carrying a load. What should I be checking to fix this? Leaking cylinders? Anyone taken these things apart...

Well I have a little over 200 hours on my CK20S now and I've found the following faults with it. Exhaust pipe ends in a position so that the exhaust blackens the FEL Turn signal lights are unprotected and get busted off doing brush removal Rubber mat on left hand side will not stay in place...

I picked up a Braber 48" rotary mower deck (it's used). The seal went out and I need to get a new one. The local bearing store tried to order one in but it's not the same. This seal goes in backwards compared to a regular seal. Any place online to get these?

I'm trying to find replacement engine bearings for my Massey Ferguson 1010 made by Hinomoto. The engine is a 3 cylinder Toyosha CS86. If anyone knows where I can locate some bearings for this engine I would appreciate it.

Does anyone know where I can get replacement lenses for the turn signals on my CK20? I don't want to buy the whole assembly. At least not for the $30 each I was quoted by my nearest dealer plus freight. I'm sorry but that was a bad design putting them on the ROPS unprotected. I'm going to...

The Bobcat dealers in my area used to sell Kioti equipment until they were bought out by PAPE equipment about 6 months ago. Now the nearest dealer is 99 miles away. The Bobcat dealer says that the Bobcat branded filters will fit my CK20. Is this true?

Is the 3PH supposed to lower by itself over time? I had no implements attached but I left the 3PH in the up position and noticed a couple days later that it had lowered part way on its own. I'm taking my CK20 in for service for some other problems but I was wondering if this is normal for the...

I Just got my CK20, 2006 year, and have been trying it out but I've run across some problems that I'm thinking I have something really wrong with my tractor. I put a set of clamp on forks on the bucket and lifted an object on a pallet that weighs about 4-5 hundred pounds. The tractor seemed to...

It's time to replace my aging MF 1010 and upgrade to a FEL and maybe HST. I've looked at John Deer, Case, MF, Kubota, and New Holland and I must say I've been disappointed with them all when compared to how heavily built my 1010 is for an 18HP compact tractor. Even with loaders the weight of...