I'm working on this after customer tried to repair himself. It's a 9n tractor and customer says the engine is from an 8n . He replaced the carb and the governor. It idles but you move the throttle more than 3 notches it runs wide open. So how do i adjust this? Thanks for any help.
The three point is not working. Checked the micro switch on right rear telling when backhoe is on tractor . Checked key way on three point lever. There is a hydraulic line coming from what I believe is the three point divertor valve going into top of 3 point on right hand side. No oil coming...
Replacing starter. The original is a prestolite with the solenoid inside the nose cone. Parts are no longer available from my rebuilder. I got a delco direct replacement. Problem is that the ringgear rides all the way down in the V on the drive causing the starter to bind. There is no way to...
Ii have a John Deere 2240 hydraulic have a mind of their own. May or may not work when I start tractor. If they do work they work as long as tractor is running. But if cut off and restart then they won't work. Checked sump screen. Checked pressure at power steering T only had 100lbs. Remove...