no offense taken, I would agree its more for occasional/specialty work. It does well for its size actually as far as digging and pushing. For doing a lot of dozer work it does get tiring having to go from low forward speeds to high reverse. A shuttle shift on this thing would be a game changer...
2018 Nortrac 35XTD Dozer with 61hrs. Also included is a nortrac 6 shank 3pt ripper.
The dozer has been fun, but it just doesn't see much use anymore so I have decided to put it up for sale.
It has had a Donaldson air filter installed to replace its original automotive style air filter and I...
I had bad luck with replacing seals on our mahindra 2810 as it would always leak. talked to a dealer who recommended I use silicone sealant. I haven't had one leak since doing it that way. It is still going good with no leaks. 2810 gear rear axle seal picture thread
being a 10 series its probably similar to the 2810. The PTO seal is a two piece seal (the inner and outer parts of the seal turn on themselves and does not move on the pto shaft) . I had leaks after seal replacement also until I used RTV. after using RTV per dealer advice I ended all my seal...
I wish i would have taken a pic of the original but i forgot :( It reminded me of the air cleaner from the 64 Dart I'm working on with my brother. lol... The worst part was when taking out the element it was really hard not to have dust go right down the intake. Also mitered joints are...
I decided to upgrade the engine cooling on my dozer. Hopefully this will prolong the time in between blowing the radiator out. I added and engine oil cooler, and booster engine coolant cooling as well. I used the thermostat by pass ports for the coolant circuit and then used a sandwich oil...
The original location of the throttle lever wasn't very good for me and I'd always bump it with my leg when operating the dozer. It didn't take long for this to become a major annoyance, so I took some time to relocate it to a better spot. I was able to reuse everything like the cable and...