Recent content by textedford

thanks to ledgemere farm i have a 2021 1626 2/3s of the bolts were loosen thanks again tex.

thanks alot im going to work textedford.

hi John0829 are you talking about the draft control arm cam pin thanks textedford.

no but i will see if i can find what you are saying thanks textedford.

Hi Guys I have a 1950 8 N that the 3 point hitch dosen't work right. We have replaced the hydraulic pump, upper cylinder, piston ,rings,and all gaskets and the arm that goes thru the big spring on the back, The draft control level(the short one under the right side of the seat)seems to be...

hi guys doesn't look like ill get one anyway though it would be handy owell thanks anyway.

hi achingback the 1626 is already setup for the pin style would like to do that but thanks all the same.

hi guys looking for a thumb for my 1626b can't find one from mahindra help thank.

hi guys got a new 72" HLA 1000 snowplow for my 1626 does anyone use HLA can't find a backblade for it,and has anyone put the pro wing kit pw-22 on a HLA plow any help would be great thanks tex. 1950 8n ford. 2021 mahindra 1626.

yes i see that found a big funnel to go around there after i get it started off thanks again tex.

hi seville009 thanks alot both my books say there is a shutoff valve in it thanks again tex.

hi guys i have a 2021 1626 my book says there is a fuel shutoff to change the fuel filter i can't find it help thanks tex. 2021 1626. 1950 8n ford.

hi LittleBill21 your not protecting the lights your protecting the wire/ system tex.

hi LittleBill21 yes true for one at 100% is 1.5 amps but for two at 80% load is 2.4 amps not good (18w lights) thanks tex.

hi Littlebill21 found it the label said 3a.can't use that 2-40w lights is 80w or 6.66a will have to do something else but thanks for the help tex.