tshep's latest activity

Most anvils mount with a set of bed bolts and can be adjusted in and out. Normal setting for clearance is the thickness of a credit...

It's fun! Spend (now) about $200 for a kit, pipe wrench parts apart before complete removal, and repaint at the end. If you're diligent...

If it helps... I had to get it in my head that "Top" did not mean top - it is the position that is doubled, as for carrying the deck...

OK, bottom end first! THX guys...

Noticed on my last 'road trip' that my BX23 ignored first few (partial) turns of steering wheel. Let's say the road curved left a bit...

Couple of peeves... Big cars and big drivers, who expect to be able to cut the corner in a parking lot. I'm lined up, in my half of the...

Hello guys can i use john Deere 8r245 with John Deere DR16? Also, can i use 6R195 with John Deere DR12 planters?

I normally could care less, I inherited a Kubota. I am impressed that - I have yet to be told "NO PARTS, at any price" for anything...

I don't know your machine, but that is the way an open (un-special) differential works. The question is: can you (safely) stop both...

Is there an o ring in the female end? I've seen stuff like this in oil and AC applications just not in hydraulic, but there is always a...

I have a BX23 with correct BH and pressures. When I haven't used it in a while, I wonder what has happened, and quickly relearn that it...

I have a neighbor that lets a mower roll down, and manually pulls it back up by rope - been doing it for years

I occasionally, now, drive by about 10 flag poles in a row, but not plumb. The not quite vertical lines really show it off - I couldn't...

Well, after much measuring and such - change of plans! (A single block will not raise and level all way around - 6 inches slope...

And another.... Saw a SNL reference. I'm in Richmond, and in the first year of SNL, the local guys at the station were watching the...