Recent content by vegaome

  1. V

    Kosch Sickle Bar Mower

    Howdy Folks, I picked up a Kosch side mount sickle bar mower for my 8N. Its in rough shape, Its a model K-145 I believe. Anyone familiar with these? v/r Mike
  2. V

    Working on 8N

    Howdy Folks, My 1951 8N won't start and I could use some advice. Its a 6 volt, positive ground, side mount distributor. The motor turns over and I have 6.2 volts all the way to the top of the coil but not to spark plugs. I took the distributor cap off and dust seal and watched the points and...
  3. V

    Working on 8N

    Howdy Folks, My 1951 8N won't start and I could use some advice. Its a 6 volt, positive ground, side mount distributor. The motor turns over and I have 6.2 volts all the way to the top of the coil but not to spark plugs. I took the distributor cap off and dust seal and watched the points and...
  4. V

    Fuel Line on 51 8N

    Howdy Folks, I have a 51 8N that someone has put an in-line fuel filter on. I have been reading that rubber hose next the the manifold is not a safe thing. So I just want to put it back to steel. I do have a coil of 3/16 brake line, would this work? I have tried to search for fuel line size...
  5. V

    8N top link

    Howdy Folks, What length top link would I need to hook up a potato plow? v/r Mike
  6. V

    Hello Again Folks

    Howdy Folks, I apologize for not being on in a while. I had some medical troubles and with two little kids I wanted to spend as much time as I could with them. I still have my tractors but have done nothing but break them since last on here. I really enjoy the site and all the good folks...
  7. V

    PAVT Spin Out Rim Help

    Howdy Folks, I just bought two 28' PAVT (Spin Out) rims for my MF 135. They did not have the centers, only the outer rim the tire mounts to. I have been looking where to buy the center part and have not found any. Does anyone know where to buy centers for these rims? v/r Mike
  8. V

    New !951 8N

    Howdy Folks, I bought an old 8N ford tractor last week. Here is a picture, sorry its at night. Everything seems to work on it so far. v/r Mike
  9. V

    Home Made Exhaust Manifold

    Howdy Folks, I have another thread going where I'm working on my MF 135 with a perkins gas engine. After looking at my cast exhaust manifold I think it would be good to replace it. Its pitted pretty good and there is not much left sealing it to the head. So I will replace it. A thought I...
  10. V

    Old Ferguson Plow ID

    Howdy Folks, Here are a few pics of the plow and discs. I think one of the landslides (I think you call them) is a little bent. Also one of the disks is broken. In one picture you can see how worn down the shares are. v/r Mike
  11. V

    Old Ferguson Plow ID

    Here are the pictures. I dont have a plow manual to look up parts. Just trying to figure out what model it is and hopeing someone out there has one. v/r Mike
  12. V

    Old Ferguson Plow ID

    Howdy Folks, A friend gave me a two bottom plow. He said its a 14 inch two bottom. The model part of the tag is damaged. I can make out Ferguson, the serial number and AO-4 is all I can read on the model part. Did ferguson make an AO-4 two bottom plow? I will try to take some pictures...
  13. V

    Baby Girl

    Thank you everyone for the warm wishes and advice. I call her my little indian princess because her mom's part Cherokee. I can already see the wheels spinning in her head. I havent decided which little finger just yet though. Here is a picture of our son Matthew who is 2 and 1/2. He loves...
  14. V

    Baby Girl

    Howdy Folks, Sorry I'm a little late in posting this but better late than never. Here is Molly Violet Elizabeth Daugherty, 8 pounds 10 ounces and 22 inches long. v/r Mike
  15. V

    Oil & Fuel Well I bought a MF 135 today

    Howdy Folks, I took a few pictures today. Here is the broken nose piece, the damaged right front and the hood alignment.
Top