I think that is a very good idea. I’ll put a coat of Flex Seal over the Flex Tape.
Should outlast my tractor riding days. My wife reminded me that I don’t think twice about paying more than $100 for a pair of shoes about every 6 months but I won’t spend the same amount one time for a rubber...
I cut strips of Flex Tape and got all the holes closed up for now. I had to do something to keep the wasp from getting underside of boot. Last summer, I raised the loader bucket and 5 or 6 wasp came out in full attack mode. Also Mud Daubers like to build rock hard “mud pies” on heim joints.
This is the boot I need. Boot fits in a 3 1/2” square cutout and about 3 1/4 “ tall. I have tried to find an automotive shifter boot but most fit flat on the floor pan. I was told this size boot was used on several models of Ford/ New Holland tractors. Just keeping my fingers crossed one can...
Reposting.. Sorry I accidentally deleted my original post. I‘m looking for a New Holland 86530982 rubber boot for the 7308 loader valve on my TC33D. Hoping to find a used one in good condition or a NOS taking space on the shelf that won’t cost me a kidney. I not going to pay the ridiculously...
I appreciate all the feedback. When I told a friend of mine I wanted to get a set of clamp on bucket forks, he showed me his used Kubota and it had a “smiley bucket”. The previous owner said he used clamp on bucket forks and it had bent the bucket. I’d rather have a flat straight edged bucket...
Anyone using clamp on forks similar to these? A set of forks would sure would be handy to have. I wouldn’t be picking more than 300-500 lbs. but I don’t want damage my bucket.
I replaced the power steering reservoir/filter on my TC33D because it thought filter was starting to get stopped up causing steering to be sluggish. I drained and installed clean fluid but it turned out the filter was fine and not the issue but had a kinked hose. Anyone want the old one? I know...
I am looking for a 5/8” id x about 10” long hose that goes from the hydraulic oil reservoir to the power steering pump on TC33D. The first nylon reinforced hose suitable for hydraulic oil I used, kinks at the offset so I tried to replaced it with single braid hydraulic hose. It has a stainless...