Search results

Just under what your 3 point hitch will lift.

Give this dealer a call about the T500a hydraulic fluid, I got a 5 gallon pail from them during COVID, they were great to deal with. I could not fid it anywhere then. Cub Cadet Parts, Cub Parts, Troy-Bilt Parts, Zero-Turn Parts and MTD Parts

Good job, the hydro chute deflector is a must. If the hoses seem to be straining ot twisted, I got a set of 90 degree live swivels, make a big difference. Got them From here: JIC 6M x SAE 6M Live Swivel 90 Elbow Super Swivels 9SS4MO6XMJ6ZV | No Brand Name | Brands | www.surpluscenter.com

This is where I got mine, he makes custom hydraulic top links also. https://haytools.com/TNT.htm

I sent you a private massage about the Technical Service Manual that I have. Tried to attch it but the file is too big.

Try to push the loader lever further over, most loader dump valves will have 2 detent positions, First detent is dump slow, second detent is faster.

Take a look here: Bercomac

You can try a local hydraulic shop or you can order custom hoses from here: DiscountHydraulicHose.com

Make sure the seat is down as far as it can go. Try to reset the seat, pop it up and flip it up and then wiggle the seat and push down. I know if my seat is not in the right spot it will do the same thing.

Got my Rear remote kit from Summit Hydraulics, they also have top link kits also. https://summit-hydraulics.com/

Give this compamy a call: Bercomac I had one and it worked good, Keepsthe wind and snow from getting to you, I never fogged up. The only issue I had was that the window material slowly shrinks over time. Every winter it got a little harder to put on and zip closed, I took it to a boat...

Unhook the loader couplers and reconnect some times this helps, also, I know on my tractor the dump/uncurl, the loader joystick has 2 detents. Push lever to the right it dumps slow, push it further to the right ot dumps faster.

This is the rear remote kit I put on my tractor: Electric Rear Remote Valve Kit for Compact Tractors (Two Spool, Three Spool, Four Spool) I got the three remote kit with 4 button joystick and one rocker switch 1st remote for a hydraulic top link, rocker switch controled mounted next to the 3...

Here is a goog video in tougne weight:

I put on a Summit rear reomote kit on and just ran hoses from the rear to the front. I used there 3 spool with joystick buttons. One set for the hydraulic top link One set for the backblade with hydraulic angle One set for the fromt remotes, runs my hydraulic chute defector on the front mounted...

I got the Cross Climate2 for my wifes Subaru and for my daughter Jeep They said they are excelent in the snow, my daughter said there are as good as the dedicated snow tires she had on last winter. Road noise if same as the old tires, definetly more noise in the rain as the water is being pushed...

Prices have gone up I payed $1200 shipped now the unit alone is over $1700. Yes i bought an extra set of belts just in case they were a weird size and have them on had.

I have a Betstco standard duty flail mower 48" with the hammer blades, I have not had any problems with it and cuts great, I have a 25 Hp Subcompact tractor and it hadles it just fine, I have mowed grass to brush up to 3" with no problem. I would buy it again.

Clogged filter, bad fuel, bad fuel pump? There is a fuel filter that is before the fuel pump. do you use the glow plug? Here is the parts of the fuel system and part numbers: Cub Cadet Sc2400 (54A) 54AEA4N-727 54AEA4NO727 54AEA4NP727 54AEA4NQ727 54AEA4NR727 54AFA4N-727 54AFA4NO727 54AFA4NP727...

Give this place a call: Bercomac

Would something like this work: Amazon.com

Post your questions here: Snowblower Forum Someone on there should be able to help you.

Take a look at Bercomac and Give them a call, Bercomac

Go to: Made to Order Hydraulic Hose Assemblies | Discount Hydraulic Hose That is where I got a buch of hoses made up and was alot cheaper than the local shop.

Print this coupler guide out works great and very accurate: https://summit-hydraulics.com/wp-content/uploads/2019/02/Quick-Coupler-Identifiaction-Chart-min.pdf

I have one of these on my tractor for 3 winters, worked great. Bercomac

Do you know anyone with a 3D printer?

I have a set of those they work great.

I bpught this pto switch from Amazon as a backup, work fine with my tractor. https://www.amazon.com/gp/product/B07BD3KCM9/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Don't forget to add some hydraulic fluid to your tractor, my smaller top link took about half a quart to fill the cylinder and lines.

Print this out it is actual size of the coulplers: https://summit-hydraulics.com/wp-content/uploads/2019/02/Quick-Coupler-Identifiaction-Chart-min.pdf

For reference print out this Quick Coupler Identifiaction Chart: https://summit-hydraulics.com/wp-content/uploads/2019/02/Quick-Coupler-Identifiaction-Chart-min.pdf

I added rear remotes to my Cub Cadet/Yanmar SC2450 sub compact tractor using Summit Hydraulics Electric Rear Remote Valve Kit for Compact Tractors. This kit will connect to the two quick connect power beyond couplers on the rear of your machine, These are the couplers often used to connect a...

I added rear remotes to my Cub Cadet/Yanmar SC2450 sub compact tractor using Summit Hydraulics Electric Rear Remote Valve Kit for Compact Tractors. This kit will connect to the two quick connect power beyond couplers on the rear of your machine, These are the couplers often used to connect a...

I took the measurement of my screw top link that came with my tractor. My Sc2450 Tractor 3 point hitch is Catagory 1 Measure it all the way in and the way out. You can add a few inches to to if you think you might need it for different attchments, but I have a landscape rake, flail mower, back...

Print this out, This how I fugured out my couplers. https://www.discounthydraulichose.com/v/vspfiles/downloadables/qd_sizechart.pdf

Got mine from https://haytools.com/TNT.htm He has premade and custom orders, great quality & fast shipping.

I got mine from Haytools, He has all sizes and will custom make it also. https://haytools.com/TNT.htm

Is there a valve that controls the lift of the mower, like the 3 point hitch has?

I was ready to buy the loader buddy with thumb but he said he would not be able ship it until spring. I agree his fabrication is excellent, I have the pallet folks there are great. I wanted the grapple but he said he stopped making them. Is he still making the grapple? Did he give you a price?

This is what he has on his website: I am taking a much needed break while I move the facilities to a different location. Plans are to commence again in the Spring. In the mean time I am offering the business up for sale. Age and current future plans will not allow me to take the business to its...

Discount Hydraulic Hose | Your Online Hydraulic Shop I have orded 8 hoses and a bunch of fittings from Discount Hydraulic Hose | Your Online Hydraulic Shop not one problems with the hoses or fittings.

I had the same soft cab fot my tractor, it works reaaly good. So much better not having the wind and snow hit you. Never fogged up on me. Once I put mine on I parked it in the sun for a few hours to remove any folds form being stored The only problem I had was over time the clear plastic will...

This is what I use, for dry material, grass seed, salt. but the price is crazy, Bought mine a long time ago from Tractor Supply for $250 Was shoked how much they went up. FIMCO 3 PT Dry Material Spreader 4.5 Cu Ft 12V

I put one my snowblowers delfector, it was a but slow but it worked great for many years I installed it in 2011. I is a 35 pound 4" stroke, 12 volt actuator, static force of 70 pounds, speed of 2" per second. Even though it was not a large it never got pushed up from the snow. I mostly ran the...

Do you make or going to make one for the Cub Cadet/Yanmar Sc2400 with the CL100 loader?

I bought a 3 spool electric rear valve kit and and a some quick coupler sets in different sizes and all were very well made. Had to call there tech line due to a wiring harness not wired right, they were very nice and knowledgeable. Sent me a new harness with next day shipping no cost to me.

Take a look Here: Bercomac And Here: Front Mount Snowblower - Erskine Attachments 3-Point PTO Rear Pull Snowblower - Erskine Attachments

I called and asked Summit Hydraulics about getting different couplers that what was in the kit when I ordered there rear remote kit and they said no. So I had to order adaptors also.

I have had this same issue with my backhoe, unhooked the hydraulic couplers, reinstalled problem went away.

Great, their customer service seems good.

Glad you got it figured out.

For the joystick control. Take the plus’s out and stretch them out. The two longest plugs are set. And the shorter are a set. Plug them back in and see if that helps.

By the way I had to add 16 ounces of hydraulic fluid to the tractor after I got the remote kit and the top link installed and got the air out of both.

Have you had a chance to try the rear remotes yet? It works great very smooth and can get it move the cylinder a small amount, much better than I expected. Right now I only have the hydraulic top link, but plan on adding a hydraulic cylinder to angle my back blade and also add a cylinder to my...

I had the same problem could not see the wire colors so I called customer support, they did put the wiring harness together wrong, on the 4 pin connector that comes from the rocker switch they put the positives on the same side as well as the grounds on the other side. that connector should have...

Nice. I am doing the same thing on my Sc2450. The loader buttons work just fine. But I ran into and issue with the rocker switch not working, I think they put the wiring harness together wrong for the rocker switch, I only have power on one side of the two pigtails but there is power on both...

I just bought a hydraulic top link from here:http://haytools.com/TNT.htm Had it in 3 days.

Check the hydraulic fluid level on tractor. Disconnect and reconnect the hydraulic couplers.

Take a look at Discount Hydraulic Hose | Your Online Hydraulic Shop https://www.discounthydraulichose.com/bulkhead-couplers.html#/perpage:36

I have there 48" flail mower, works great have had no issues. I would buy from them again.

All this talk about shear bolts made me go and check my stash, got 5 of each, have not broken one in a few years, Then I checked the shear bolts on the blower and found the impeller shear bolt loose. That would have probably broke as we are supposed to get 8-12 inches tonight into Friday. So...

I have a subcompact tractor Cub/Yanmar Sc2450 and I am going to add rear remotes to the tractor. I want to add a hydraulic top link and a hydraulic angle cylinder to my back blade. Looking for advice on the size of the cylinders as in bore and rod size. The top link is used for my ballast...

Saw this on youtube today, another quick hitch product:

This is probably too small for your tractor, but its worth a look: https://www.goodworkstractors.com/product/worksaver-electric-grapple/

I have a Harbor Freight hoist in the rafters of my garage, Works great for lifting my winter cab on and off my tractor. I also use it to lift the front of the riding mowers in the air so I can clean the decks and take off and sharpen the blades. I use it all the time to pick things up and put...

You probably do not have enough hydro fluid. To check the hydro fluid level properly: The dipstick is unscrewed, wipe clean the put the dipstick in but do not screw it in. The dipstick must be placed on top of the hydro fill tube to get the proper fluid level. You must use Cub Cadet / Yanmar...

Replace one or both of your 3 point hitch side links with some chain, that way the blade will float left to right and not have a corner dig in.

Here is review of some:

I have used Wet & Forget, works good. Wet & Forget | No Rinse Outdoor Cleaners, Product Selector

This is where I get parts for my well water system: Ohio Pure Water - Water Treatment Equipment and Accessories

Mine was doing the same thing, replaced the fuel pump works now. This is what I bought: Amazon.com : HIPA 24 393 16-S Fuel Pump for BS 808656 491922 John D LG808656 Honda 16700-Z0J-003 Kawasaki 49040-7001 Fuel Filter & Fuel Line Shut Off Valve for Cub Cad Poulan Lawn Mower Parts : Home Improvement

Here are the parts for my homemade axle vent: Amazon.com: uxcell Reducing Pipe Fitting Adapter M20X1.5 Male to 1/2 G Female, Stainless Steel for Water Oil Air Pressure Gauge: Home Improvement https://smile.amazon.com/gp/product/B07D25TMNB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1...

Are you sure the hydraulic flow control knob is turning the shaft? Or is the knob stripped and not turning the shaft?

Take a look at the new Vanguard Briggs repower motors. They make it easy with multiple ways to accept the throttle linkage. Single-Cylinder Engine Advantage | Vanguard® Commercial Power

I do not know if this is old news but Boss make tractor snowplows. Expanding the vehicle applications for plows, BOSS now offers straight-blade and v-plow options for select tractor models. (Excludes Heavy-Duty & 10' DXT) Undercarriages available for select models John Deere 3 & 4 Series, John...

Arctic Snowplow (V.A.W. Variable Attack Wing) Blade

Just saw this on you tube, skid steer blower & plow combo.

For your enjoyment: Which Diesel Anti-Gel Additive is Best? Let's find out! - YouTube

There is a recall on certain cab models. Here is the article: John Deere Recalls Compact Utility Tractors Due to Injury Hazard (Recall Alert) | CPSC.gov

There is a recall on certain cab models. Here is the article: John Deere Recalls Compact Utility Tractors Due to Injury Hazard (Recall Alert) | CPSC.gov

CLAVERACK (WRGB) Two men from Claverack are in critical condition after being rolled over by a farm tractor. That's the report from Columbia County Sheriff David P. Bartlett, after deputies and multiple fire and rescue crews were called out at about 2:30 p.m. Saturday. The sheriff's office...

Here are some pictures of the winter cab I built for my tractor, I have lexan for the windows no issues with fogging.

I made mine out of 4000 psi concrete when I has a slab poured. Made a form out of OSB put a draw bar in and welded 2 large eyelet bolts for the top link all together with rebar inside. The middle eyelet bolts are centered so I can lift it with the loader if needed. Is measures 20" tall, 19" wide...

Saw this at a gas station:

I had one from Bercomac for a few years until built a winter cab. 4" Soft Cab for Compact and Sub-Compact Tractors Was not the greatest, still let in some snow and wind around the bottom but it was alot better than nothing Here are some pictures of the cab I built out of wood and plexiglass:

Saw this Video today, Do not know if it has been posted before. Tread seems really aggressive.

Broke the impeller shear bolt on my front mount snowblower, The manual says to use grade 2 bolts on the impeller and auger connections. There are two bolts on the impeller one that goes through the shaft and another that connects the impeller to the shaft via and ear. The parts list says the...

NISKAYUNA, N.Y. (NEWS10) Troy-Schenectady Road is back open Thursday morning, after a serious crash involving a snow plow and an SUV occurred near Shannon Blvd. The driver of the plow was is being treated for serious injuries at Albany Medical Center. Police say 68 year old, John Berger was...

I made mine out of wood and yes it is top heavy, Put a couple of bolts at the bottom of the cab to hold it down.

A few photos from the last 2 months: [ATTACH=C

Get one of these:EMP Tractor Draw Bar Stabilizer for Category 1 Tractors, Model# 735-1 | 3-Point Drawbars Stabilizers| Northern Tool + Equipment Get one of these: http://www.northerntool.com/shop/tools/product_200519382_200519382 Built a plywood forum around them fill with cement. This is...

Had a hydraulic line on my front mounted snowblower let go yesterday, split in the hose just before the fitting that lifts the blower. I have a plexiglass windsheild on my homemade cab I built. What to use to clean it off?

Here is mine, made a form out of plywood put a 24" draw bar inside for the 3 point arms to lift, Eye bolts welded to some rebar and filled it with leftover 4000 psi concrete with fiberglass when I was pouring the concrete pad for a now garage. You can just get a few bags of ready mix and do the...

I have have Jery's Tach-n-go and a set of the non movable forks they are really good quality, great welds and everything fit perfectly.

You should be able to get a Yanmar SB52 front mounted snowblower, I have one on my Sc2450 tractor. It is a beast. I know the SB52 blower fit the 2400, 2900 and 3100 series tractors. Here is a video of the SB52 front mounted blower on a 342:Yanmar 324 tractor with SB52 snowblower from H. Broer...

Here are pictures of my homemade cab, made from wood and plexiglass.

Here they are from Amazon: Amazon.com: Genssi Elite 1W White H6m 723 LED 12V ATV Scooter LED Lamp Headlight Light Bulbs (Pack of 2): Automotive I bought them for my Sc2450 Cub / Yanmar tractor. they are really bright. Had them in for about a year.

Saw this today, No staps or chains plus no working lights on the trailer and the tires we half flat.

RUTLAND, Vt. (AP) Police have arrested a 30-year-old Vermont man who they say attempted to rob a credit union branch痴 night deposit box by slamming into it with a tractor. The Rutland Herald reports Chase Siliski will be arraigned in Rutland criminal court in May on charges of felony grand...

No resistance blinker needed. I thought I might need one since I swapped out all the incandescent to led. Here are some pictures comparing the incandescent bulbs to LED. Headlights, LED on Left: Tail Lights LED on Right:

Here are some pictures comparing the incandescent bulbs to LED. Headlights, LED on Left: Tail Lights LED on Right:

I replaced all of the incandescent bulbs on my Sc2450 tractor with LED bulbs. What a difference the led's make, here is what and where I bought. It took a lot of research to find the best bulb for the money. Tail Lights Bulb # 1157 Amazon.com: JDM ASTAR Super Bright 573 Chipsets 1157 257...

I replaced all of the incandescent bulbs on my Sc2450 tractor with LED bulbs. What a difference the led's make, here is what and where I bought. It took a lot of research to find the best bulb for the money. Tail Lights Bulb # 1157 Amazon.com: JDM ASTAR Super Bright 573 Chipsets 1156 1141...

Take a look at this web site:TACH-N-GO QUICK ATTACH I have there tach-n-go for Cub Cadet/Yanmar along with there pallet forks. The pallet forks can also be used on your 3 point hitch Here are pictures of what I bought: Very simple to go between the bucket and the forks. He offers alot of...

Went out to set the timer for the block heater today and noticed a small puddle of antifreeze under the tractor. Open the hood and looked around and there was some antifreeze leaking around where the radiator hose connects to the thermostat. Tightened the screw clamp and the leak stopped. Just...

I have a 1969 Wheel Horse GT-14, anyone know how much it is worth? Has about 300 hour on a rebuilt motor.

I went out and took pictures of of the block heater on my Sc2450. The end is the orange circle with 3 wires, just to the left of the starter. Hpoe this helps.

Here are some pictures of the winter cab I built this fall, Its made from 1X3 pine, 3/4" plywood roof all held together by pocket screws. 1/4" plexiglass for the windsheild, 1/8" plexiglass for the rest of the windows. Used 1/2" and 3/4" split pipe insulation to fill in any gaps.

I picked up my Tach-N-Go and pallet forlks from the shipper today and installed it. There were no problems removing and installing the pins everything lined up perfectly. Really nice welds also. Switching from the bucket to the folks is so easy, couple of pins and its on and off. I even put the...

I picked up my Tach-N-Go and pallet forlks from the shipper today and installed it. There were no problems removing and installing the pins everything lined up perfectly. Really nice welds also. Switching from the bucket to the folks is so easy, couple of pins and its on and off. I even put the...

Here is what I made, Has a draw bar inside for the 3 point arms and threaded eye bolts that are welded. also welded in some rebar.

Here are some pictures:

This is what I built for my tractor, 16'X24'

I am thinking about getting a Hobart Handler 140 MIG welder, It is on sale at Tractor Supply for $469.99 Hobart Handler® 140 MIG Welder - Tractor Supply Co. I looks like it comes with flux-core welding wire. I want to use this welder with gas what mix of gas do you recommend? 75% Argon- 25%...

Are your tires loaded with anything? If not get them loaded makes a big difference with traction also get a weight box for the 3 point hitch. The weight box I also use for ballast for loader work. My tires are loaded with Rim Guard (beet juice) it weighs about 11 pounds per gallon. I made a...

Here are some pictures, if you have any questions just ask:

Man dies in tractor crash on upstate New York farm Posted: Oct 07, 2014 9:14 AM EDT Updated: Oct 07, 2014 9:14 AM EDT CHAZY, N.Y. (AP) - State police say a 36-year-old man has died after the farm vehicle he was driving crashed and overturned in a river near the Canadian border in northern New...

I do not know if this has been posted on here or not but here is a link about a guy buying a 2014 Ram 1500 EcoDiesel and his drive from Idaho to Alaska with a fully loaded trailer. http://www.ramforum.com/f17/ecodiesel_maiden_voyage-45309/

Here is mine:

I have also have the 5 foot Tractor Supply back blade and use it in the winter for light snow falls and for peeling up ice in the winter it works fine. It is not very heavy, so for when I do loader work I keep the backhoe on or use the ballast box I make from cement. To make the back blade...

Anyone have one of theses:Multi-Spear Ultra Fork Or order fom the company? I am looking at the 7 spear version.

In my my shed.

I received my 50 watt flood light today and it is heavy and really well built. Here are some pictures of the light: I will get more pictures up once I get it all wired up.

Thanks for the compliments, I used 3/8" concrete wedge bolts to attach the silplate. My brother said he liked the color of the siding and said not to paint it, but it was so close to the other building that I had to paint it. If you do paint yours the manufacturer says to use acrylic based...

Here are more pictures of the process:

Here i are the the begining pictures of a new shed: Framing starts tomorrow will post pictures.

Two weeks ago I went out to the shed where I keep the SC2450 and noticed a little coolant on the floor, checked the radiator it was full but the overflow bottle was down about 1/2". Topped it off to the full line. It sat about 5 days and I checked it everyday and no leak. We were going to get...

I want to add a linear actuator to the chute deflector on my snowblower and was wondering what thrust pounds will work the best? Here is what I am lookning at: 115 lbs. Thrust Linear Actuators

Here are sone pictures of my new Cub/Yanmar SB52 snowblower and Becomac soft cab and a 12 volt spreader.

Here are sone pictures of my new Cub/Yanmar SB52 snowblower and Becomac soft cab and a 12 volt spreader.

Is there a special type of coolant/antifreeze for diesel engins? My coolant/antifreeze bottle is on the "low" mark and want to bring it up to the "full" mark. My manual says: High Quality Permanent Type Antifreeze (Ethylene Glycol with corrosion and rust inhibitor chemicals) Coolant Mixture...

Lookng at getting a front mount snowblower for my Cub Cadet/Yanmar Sc2450 The frist one is the Cub Cadet SB52, but the Cub Cadet website only has info on the SB45, The other that I have found is made by Bercomac. P.T.O. Snowblower Hydraulic Lift Sub-Compact Cub Cadet Yanmar SC Tractors...

I am looking at thier 5" Channel Car Hauler (C5) I am looking for feedback on the trailers. I got a quote for a 18 foot by 83 inch wide trailer with brakes on both axels and 2 foot dovetail with ramps for $2695.00 I was lookng to get a landscape trailer same length and width with a split...

GREENSBORO, Pa. (AP) -- State police say two boys, ages 12 and 9, drove a large excavator at a southwestern Pennsylvania strip mine, smashing a bulldozer in the process. Police say the 12-year-old will be charged with felony criminal mischief in Greene County Juvenile Court. The other boy is...

I picked up a 52" Ratchet Rake today at Tractor Supply for $299.99 They had one of each size in stock.

So this morning I wanted to see how warm and how fast the block heater worked. My tractor is a Cub Cadet/Yanmar Sc2450, It is kept in an unheated and unattached wood structure one car garage. I used an infared thermometer with a laser and pointed it at the same spot each time on the on the...

I want to get a Ratchet Rake, I checked there website and it only lists participating Tractor Supply Stores, The closet one to me is 2 hours away and do not have any 52" Ratchet Rakes in stock, They are going to get some in February. If you have one or know someone who has one where did you or...

Anyone have a set of bucket forks from this company?Yankeewarehouse.net Or a set similar? Any problems with them? Do you like the 2x4 wood braces?

I noticed that there are 2 yellow caps on the motor with a oil symbol on them, One on top of the cyilinder head and one on the side down by the back of the motor. Which one do I use to add the oil back into the motor after I drain out the oil? Does it matter? and Why? I hav a CCY SC2450 tractor.

They make a light bar kit for the sc2400 but I do not know the wattage, Here is the kit with the part numbers: I check into the light bar kit a while ago and it was $149.99 The 12 volt DC outlet can take up to 120 Watts. The 12 volt DC outlet its what am using, I got a 55 watt light...

Anyone ever bought a trailer from them? They have 2 locations one in Ohio and one in Pennsylvania. I am looking at their 77" wide 18 foot tandem axle, #7000 lbs.

I have a Cub Cadet Yanmar Sc2540 and have about 12 hours to go and I will be at the 50 hour service interval. Change oil/filter & hydraulic oil/ filter. Do I retract the cylinders on the backhoe to get all the fluid out? When changing the hydraulic fluid. The bucket and dipperstick are fully...

I have a CCY Sc2540 and have about 12 hours to go and I will be at the 50 hour service interval. Do I retract the cylinders on the backhoe to get all the fluid out? The bucket and dipperstick are fully extended when the backhoe is transport mode (not in use).

I finally got a street pad kit (took 3 months) for the backhoe stabilizer arms. Is it okay to keep the rubber pads on all the time? Even if both arms are on the ground not on pavement or concrete?

Stopped at Tractor Supply yesterday and saw bottles of Diesel Sta-bil. The bottle was 16 oz. tthe label said "new" on it. This is from their web site: Diesel fuel degrades with time, causing darkening of the fuel, as well as sludge and sediment formation within the fuel tank. These issues are...

Tractor driver killed in Schoharie County crash Comments 1 | Recommend 11 June 08, 2010 9:39 AM Chris White CARLISLE -- The driver of a farm tractor was killed Monday evening in a crash with a Chevrolet Cobalt that crossed into the oncoming lane, flipping the tractor and ejecting the driver...

I have a slow leak in my rear tire that has Rimguard in it, I can't find the leak. What is the best way to find the leak? When I find the leak can I use a tire plug?

I have a Craftsman GT-5000 tractor with a 25HP Kohler Pro engine. The engine will cut out after 20 mins. for mowing, I does not stall out but the rpms drops for a few seconds the runs normal for a few minutes , then it cuts out.

I saw someone on TBN did this to their tractor and thought it was a great idea. I have an asphalt drive way and with the chains on the back blade floats side to side and will not dig in or leave snow behind.

Anyone know where to get a Service/Technical Manuals for tractors? I looked online but some were on CD some were books.

I will be taking off the backhoe on my tractor for the winter, It will be in a covered shed. Is there anything I need to do to it? I plan on putting wood under the bucket and stabilizers. The shed floor is gravel.

I have not really tried them when it is really dark out, only when pulling into the garage they seem light the down by the front tires and outward. Pictures of the controls:

Here are some dash pictures and front lights was getting dark fast will post control pictures tomorow:

They delivered the SC2450 today, played with it for a little while here are some pictures:

Went back to the dealer today, for the third time and bought the SC2450. Tractor, loader, backhoe with turf tires. The dealer threw in the 3 point hitch, block heater and loaded the rear tires, 12 inch backhoe bucket and grill guard and hat. Paid $17854.90 that includes tax and GE finance...

Looking at a sc2450 TLB and was wondering if anyone has one, looking for good and bad feedback. Also looking at the Kubota BX24 TLB and BX25 TLB. How do the machines compare I am new to tractors and wanted to know if someone has had a BX series.

What is the difference between a BX24 and a BX25? Same tractor just a new model year and number?

Went to the local fair last night and was looking at the tractors (currently looking to buy one) I looked at a John Deere 2305 TLB, Massy Ferguson GC2410 TLB and a Bobcat CT122. The Deere and the Massy had alot smaller tires than the Bobcat, The Bobcat tires were probably twice the size front...

Went to the local fair last night and was looking at the tractors (currently looking to buy one) I looked at a John Deere 2305 TLB, Massy Ferguson GC2410 TLB and a Bobcat CT122. The Deere and the Massy had alot smaller tires than the Bobcat, The Bobcat tires were probably twice the size front...

Going tomorrow to look at a 2005 Kubota BX23 with front end loader, backhoe, 5' landscape rake and disc. Asking $13,800 It has 300Hrs on it. Is that a fair price? I know the BX line sometimes say BX23 (2320 2350) So is this just a BX2300? What does the last two numbers stand for? What...

I have a Deere dealer about 5 miles from my house that has a 08, 2305 with a 200CX loader and 260 Backhoe, Hydro Trans, 4WD, R4 Tires, and has 2 Hours on it for $16,500. Is this a fair price? Are there any problems with the 2305 model? He also has a front mount snow blower that will fit the...

I am looking at a Deutz-Allis tractor model #5220 , It's 26HP, front end loader, backhoe, and brushog, 4WD, Ag tires 800 hours, the backhoe is a APRS 70. he is asking $13,000. Is this a good price? I know nothing about Deutz-Allis tractors so fill me in as much as you can. What years were they made?

I am looking at a Deutz-Allis tractor model #5220 , It's 26HP, front end loader, backhoe, and brushog, 4WD, Ag tires 800 hours, the backhoe is a APRS 70. he is asking $13,000. Is this a good price? I know nothing about Deutz-Allis tractors so fill me in as much as you can. What years were they...

I have a tow behind tiller that I bought last year and the manual has the chart of what oil at what air temp, it says that 5W-30 Synthetic will cover all air temps. I have about 10 hours on it, so what is it safe to switch to synthetic oil?

I am interested in Jinma tractors but can't find a website that lists where the dealers are. I have a Northern Tool catalog but want to see the in person. I am located in Altamont, NY 12009 (near Albany, NY) What other name brands are rebranded Jinma besides Nortrac.

Stopped at my local Kioti dealer today and got some prices: CK20S HST tractor with loader $14,000 Rear Mount Mower 60" $1550 Rear Mount Snow blower $3400 Electric Chute & Deflector for snow blower $1200 Grand Total $20,150 Here are some other prices from them: Front Snow blower $7600 Mid...

I have my brothers Kubota BX 2230 tractor and want to do an oil and filter change for him, How much oil do I need and what type 15W-40? I went to the Kubota website and used the parts lookup and it said to use 2.6 Quarts is this with or without the filter change?