Search results

Looking for DIY ideas for protecting the windshields when hauling on open trailers. Both for Tractors and UTV's. Thinking maybe using trim adhesive to glue a moving blanket to both sides of a sheet of Coroplast.

Plan on running a pair of 1/4" Hyd. hoses to the Thumb on a Woods BH75. Is there enough room to run them along side all the other hoses ? Do I need to pull all of them out and reinstall as a bundle? I mounted a Mechanical Foot controlled splitter valve on the Left side of the platform.

Just came across these tires today will looking for front replacements for my 4WD compact. Interesting design with the hooked bar lug. Looks like it should ride smoother and not scuff the sod while turning. Has any one seen them in person or have any experience with them ? BKT Tires - TR 128...

Has any one fitted a BXpanded quick attach to a Woods BH75 backhoe? No mention of it on their web site. Would be interested in sharing a trenching bucket and a root ripper with a neighbor.

I use a lot of different pieces of equipment connected to my Quick Hitch. I also need to remove it any time I mount the Backhoe. The holes for the 3pt. linkage pins have really worn bad and have gotten very sloppy. I purchased a pair of 3/4" and 2 pair of 7/8" steel shaft collars for the...

Curious what size the optional R-1 AG Tires are for the Model 1532 Tractor. Parts book shows rim sizes but not the tire size.

I have always enjoyed any ideas that simplify storage and mounting of implements. Built these wheel units to clamp on the edge of my 5' Woods mower . Makes it easier to hook up as you can just move it to the tractor . Also makes it nice to just roll over in a corner or out of the way. Found...

Found a well kept Woods BH 750-2 with 3 pt. mount and PTO pump. Had an easy life on a 1500 series ( 15 HP @ the Draw Bar ) Yanmar. Able to purchase a current sub-frame for my 1532 Massey from local Woods dealer. In the process of modifying the 750 to adapt to the "New" style frame. Had some...

Purchased a Woods BH750-2 in excellent condition with self contained hydraulics and 3 point mount. When installing on my 1532 Massey there is no clearance for seat because of the location of the lower ROPS structure. There is no subframe for this combination. Has any one extended the lower...

Looking to add a Sub-Soiler to the line-up. Would like to find one that would hold up to a 1532 Massey (32 hp & Cat 1 3pt.) and have the option of adding a Middle Buster shovel to cut some drainage slots.Is there a unit that will do both or do I need to purchase two separate tools? Steve

Looking for a little more ground clearence and ability to stradle 30" rows so up-graded my tires and wheels. Found some NOS 7.2 X 16 R1 fronts and 12.4 X 24 R1 rears from a Yanmar dealer. As an added bonus the belly mower does not get hung up as easy when coming out of the road ditches. I...

Decided to go ahead and install the factory rear remotes on my 1532. It has factory fender mounted joystick loader valve.(Pic 1) The new valves mount on the rear-end cover, right side. (Pics 2 & 4) Remove bypass cover & sandwich valve bodies between it and rear housing.(Pics 5,7,9,11) Valves...

Looking for a 72" rear blade with offset for my MF1532. Plan on putting my own hydraulic cylinder & mounts on it. Have narrowed it down to the Land Pride RB3672 http://www.landpride.com/ari/attach/lp/public/specs/301-388s.pdf or the Rhino 500 RHINO | Blades | Utility Rear Blades Both...

Looking to add a pair of remotes to my 1532 MF. Local dealer cannot tell me if the factory valve #3708457M92 has a "float" position. Is there a way to cross this over to the Nimco part number to check availability of a float conversion? Steve

I have a 1532 Hydro with the factory loader joy-stick in the right-hand rear fender. Would like to add two (2) aux. rear remotes also. It seems like there is not enough room to add 2 more valve bodies between the transmision case and the rear tire with the loader valve there already. Has any one...