Received a letter last night from a new neighbor. We have an adjoining property line. I was put on notice that due to issues where they used to live, I and my livestock are not welcome on their land (liability issues). Neither I nor my livestock have been on their property. I have not met these...
So, we want to abolish petroleum but still mandate minimum storage levels ?
https://www.msn.com/en-us/money/markets/calif-gov-gavin-newsom-unveils-plan-to-require-oil-companies-to-maintain-minimum-fuel-reserves/ar-AA1oSjGL?ocid=msedgntp&pc=LCTS&cvid=54f0a6de14d4401fb95903a089555120&ei=60
A dumpster diver on FB found a bunch of brand new excavator parts in the dumpster. Whoever dumped didn’t even bother to cash in on scrap value :unsure:
https://fb.watch/rcXVY5O67q/
I’ve been talking myself into a front mounted brush cutter and exploring some options. One thing I’ve noticed is a couple of the manufacturers may not be using a cushion valve on the motor, rather just teeing the lines. One side of my brain says that can’t work very well, the other side says but...
I was concerned about pulling on or with the loader so I made up a frame mounted pull / tie-down point. After machining the eye and adding an oilite bushing, it was welded to a piece of 1/2" plate. Attached using 4 new 14x1.5x40mm 10.9 bolts.
Was chatting with PTSG about the switch holes in the cab and what are they all for. When looking at the US wiring diagram they have something labeled Fuel heater (option). Anybody have one or know what it is?
Had some time today so went to look at upgrading the cab lights. I have some 6” leds and the housing looked similar in size. Took the Kioti light off and pulled the bulb assembly out to see if I could swap the guts. Found something else very interesting (IMO), the base of the bulb is stamped...