Search results

Mine's not needing replacement yet but was always curious about one thing. Does the hour meter hours transfer over or are you starting from zero again? I also found after reading this thread 70 Series BX Dash in 60 Series? - OrangeTractorTalks - Everything Kubota that there is an updated...

So for about the past year I've been getting these random phone calls to my cell asking for a particular person. Thinking it was just the typical spam calls I've been ignoring them. Recently I decided to google my phone number and discovered that my number is now showing up on multiple websites...

So I had the mower gearbox seals replaced by the dealership a few years ago because it was leaking and just last week it started leaking again. This time I had time to try and repair it my self so I took it apart and found this. There is a small gouge along the surface right where the lower seal...

Used the BX5455HD for the first time last week and looking at the skid shoes it looks like they are wearing excessively fast? Ran for probably only about 30-45min on concrete in float mode (in case anyone was wondering). I wish I looked at the skids when they were brand new but I'm guessing the...

PhotoBucket now charges $399 for third-party hosted images - gHacks Tech News Apparently now they feel something they been giving/allowing for many many years is worth $400/yr. :thumbdown: No way is it worth that much but this is crap because now all my pictures are screwed up and even...

So I have a problem with my PTO shaft vibrating loose from the gear box shaft. Here is the gearbox I'm using; 1:1 32 HP RA GEARBOX BOTH KEYED And I had to use this adapter to mate it to the PTO shaft; 1" KEYED X 1-3/8" 6T SPLINE F/M PTO ADAPTER There is only a set screw that holds the...

So when's the for sale section going to get some love? There has been a lot of complaints and confusion ever since the "New" for sale section appeared. The new one is giving people problems posting and is not very user friendly to navigate around. Also, I've noticed some new postings that...

Here is the current progress of my Power Rake that I'm building for my Kubota BX. I didn't want to start this thread right when I started as I usually get partway into a project and it ends up never getting finished but this one has come a long ways. Rake is going to be about 58 wide (roller...

I'm working on designing a Power rake (Aka Harley rake) for my Kubota BX2350 and needed some double checking on my setup. I decided to go with a hydraulic motor vs PTO gearbox. I wanted to keep the drum RPMs around ~250. I picked out a 3.15 cu in motor that with 3.7gpm I should be seeing 271...

Finally got my 4 27watt LED light hooked up. See this thread for were they came from and extra info: http://www.tractorbynet.com/forums/customization/298867-tuff-led-light-sale-amazon.html Took me a while to figure up a placement for them in a way that they would be protected and not...

So when I first got this snowblower, it had a stuck (figured rusted) shear sprocket. I took the shear bolt out and hoped it might work itself free but no luck. Finally decided to try and take it apart again. Wow, what a PITA. It took an hour of beating and finally an air hammer to drive it...

I'm trying to figure out what this stuff is. We have a cold water line that I put a diverter valve onto about 1 year ago. It's for a auto filler on a water tank. It just keep the tank topped off so it runs very little and very slowly. After a year, I noticed the valve started to leak. When I...

Here are just a few things I've built that have worked out really well. The first is actually an idea I stole from my neighbor. The front forks have worked very well and are super easy to put on and take off, plus they don't weight much. I actually made these probably a couple years ago, just...

Is the report post not working right now? I tried yesterday to report a spammer and it didn't seem like it was doing anything. The progress bar at the bottom of the page would just slowly go across but the page never changed. I tried twice and nothing and again just now and the same thing...

So I have been using a front blade to snow plow for a couple years without any issues. Now I bought a rear 3pt snowblower this year and got to try it out for the first time last night. I'm still using the front blade and found that when trying to plow the front end is too light with the snow...

I went to Alaska just recently and in their forests is a ton of this neat looking ground cover plants as I would call it. Trying to find out what it's called cause I'd love some of it around our place. It's the green (obviously :D) stick looking plant, and not the ferns.

But I couldn't help to post it anyways. Just like to show what I picked up today. Anyone want to guess what I got it for? This is the first 3pt PTO item I've ever used, so I'm learning here. From my understanding, the PTO shaft is suppose to be somewhere between fully compressed and fully...

I am borrowing my father-in-laws John Deere 265 w/ the 30" mech tiller and found it needs a new belt. I went onto JD's website and found two different belt numbers for the rear secondary belt. M112230 & M137547 Now since there is only one belt in the rear that I can tell, does anyone know which...

We got a used Heat & Glo Passage fireplace and where getting it all wired up and ran into a small problem. Not sure if we did this or if it came this way but found the junction box has a link that shorted out. Wondering if I would be able to just resolder a new link or if I need to buy a whole...

Does anyone know what this type of setup is that's on top of the front wheels? VS this which I normally see?

Found someone selling this local. Just wondering if anyone had any info on it.

Tried searching but didn't find anything. Anyone know the quick disconnect coupler size on a BX2350? Are they 1/4, 3/8, 1/2? This looks like the right type but I'm not sure on the size. MSC Item Detail MSC Item Detail

I am building a basic 3-pt carry all that I plan to use with the harbor freight quick hitch that I will buy in the future. I am going to just use the carry all with the normal lift arms now but don't want to redo the pin locations when I get the QT so I like to set them up close now. Does anyone...

I'm real close to buying a new BX2350 and had a couple questions about the front snowplow w/ hydraulic angling. How difficult or long does it take to mount and dismount this unit? Thinking if the snow gets too deep for piled up too close in spots that I can just unmount the plow and hook up the...