Search results

If anyone is interested in a rear remote for a DX29-33 I have one posted in items for sale. Someone just as well be getting some good out of it.

If anyone is interested in a rear remote for TC 29-33 I have one posted in items for sale.

I needs some help identifying the tractor model this blade will fit. I bought it for my 445 John Deere but the quick attach is too wide and will not fit. If anyone has any idea what model it might fit I would sure appreciate it. I have searched the web with the model number but couldn't find...

I posted this in the Case IH section but didn't get any replies so I'll try it here. I was doing some tilling and picked up a rock with the King Kutter. The slip clutch engaged and I stopped and lifted the tiller and the rock came out but upon re-engaging the PTO I had some noise which I...

Hello all. It has been a good long time since I have had time to visit the forum but I know where to turn there problems arise. I was doing some tilling last night and picked up a rock with the King Kutter. The slip clutch engaged and I stopped and lifted the tiller and the rock came out but...

Well if it's not thing it's another. The poor old cylinders on my plow had set for some time and were leaking out the weep holes. I pulled one apart and the inside of the tube is pretty rough and I doubt that new seals will help. I am considering going to one dual action cylinder vs the two...

I installed a dual selector valve on my Case DX33 to operate my snow plow and 4-in-1 bucket. I split the circuit at the curl circuit and installed the valve. I have normal function of the curl funtion on the loader when the solenoid is not energized as it should be. I install hoses on the...

I stumbled upon a hardly used Land Pride PR1660 power rake with hydraulic angle. The unit doesn't even have 10 hours on it. What would one of these be worth?

I purchased a 4in1 bucket with what I was told was deere quick attach brackets. Can anyone validate by the pictures? Looks like it won't work on my DX33 but I can remedy that. If you know what loader these brackets would fit that would be great as I am going to sell the brackets and have the...

I picked up this diverter valve and I need a little advice on the best possible way to mount this on my DX33 to run the angling cylinders on my plow and operate the new 4-in-one bucket. I am wondering if I should mount the valve at the point where the curl lines attach to the hoses and then add...

Has anyone used one of these? X-Tra Valve Kit | Precision Manufacturing

My BIL installed a secondary electric pump unit on his WD as his factory hydraulics crapped out. He is trying to get power up and gravity feed down and perhaps power up and down if possible on his three point. The pump he installed has one solenoid valve and I believe to get power up and down he...

Well I just got a heck of a deal on a new 4 in 1 bucket off ebay. It looked like a lighter duty unit as it only had one cylinder in the center of the bucket to lift the clam shell. Has anyone see one of these before? For what I gave for it it really won't matter. I'll have a set of john deere...

Hey guys, I have been researching the possibility of adding additional remotes. I just added a snow plow to the FEL and want to be able to utilize the angling feature. It looks like the most popular way to go is with the electric valve setup. I was wondering if adding this...

Hello all you kubota guys. I am thinking of trading my DX33 off for a L3240 w/cab. My DX is an '04 model with 320 hrs with loader and quick attach bucket and one circuit in rear and R4's. A local dealer quoted me $10,000 to trade up to an '08 3240 set up the same way. What do you guys think...

Has anyone had problems with the ignition switch on their DX or TC33? My DX has 223 hours and the switch is starting to get very hard to turn. I called the dealer and that cheap plastic switch is $50.00! Any other sources out there?

After having some problems with the carb on my Exmark Viking with a Kohler CV14T I ordered a kit for the carb and installed it. The unit never seemed to reach its specified RPM range at fast idle so I adjusted the governor to the Kohler factory specs and now the governor seems to be not working...

While mowing at the local fair grounds today my DX33 blew a line on the oil cooler. Needless to say we got a mess under the hood. Just turned 100 hrs. on the unit. I though she was on fire when all the smoke came rolling out from under the hood. Sure did cut the mowing time short. Has anyone...

Here is the three point receiver hitch I built in my welding class. I received kudos from my instructor...we are thinking production here!

A neighbor called and wanted me to come over and till his back yard so he could re-seed. I had done his front yard a couple of years ago with my Rhino four foot tiller, needless to say the KKII worked great and with a lot less effort. I set the skids to the next to lowest setting and went to...

Well I think I got the KKII broke in today. Spent the afternoon tilling gardens around town. The KK worked great!! Nice to have a heavier tiller and the depth was good to. All of the folks that I tilled for were impressed and glad they didn't have to till them by hand!

Well I have my new tiller all set up and ready. A few comments. Paint is lousy but then I knew it would be. The unit is heavy and appears to be solid. They did miss a weld in one area of the mounting bracket that I will keep an eye on, the other side is welded completely. After uncrating and...

Well I had just got the new tooth bar and the wife and kids decided they wanted a tree removed for the play area out back. The little woman took a few actiion shots!

I am going to upgrade tillers and was going to see what the forum thought. My DX33 is shown on the Case NH web site as being rated for both the 60" and the 72" inch tiller. I am looking at the 60" King Kutter but thought if the tractor would handle the 72" I may go that way. I will be doing...

I am looking at a LAnd Pride Rake. Does anyone know what one is worth? This one is in great shape.

Does anyone have one or know anything about the TR-3 Rake? http://www.absoluteinnovations.net/landscape/package100.asp

I installed a new tooth bar on my DX33 today and thought I'd share a few before and after pics. This is one heavy duty unit and it made a world of difference in how it digs!

I saw this unit on Ebay and it looked like quite the attachment for grade work for a new yard. Anyone know what it is?

I am looking for the one tool that would be best suited for preparing a yard for seeding. I have been tilling a few yards for a local landscaper but was wondering if a pulverizer might be better for leveling and preping the soil for seeding. I have been looking at the Freedom line of soil prep...

A good friend whom was a devoted fan missed the last show because of a glich with his dish receiver. Would anyone happen to have recorded it?

Well it was a whopping 5 degrees or so here in NW Missouri yesterday. I went out to warm up the DX33 to move a little snow, after cranking it and getting off to knock the ice and snow I walked around the left side and to my shock I saw a large puddle of hydraulic oil under the tractor. I shut...

Has anyone checked out the Polaris Task Master and current pricing on these units? Have any comments on their performance.

I just had my first rear remote installed for my DX33, I also just picked up another rear remote on Ebay. Does anyone know if the secondary valve body is the same as the first. I assume the only difference is the lever and possibly the steel tubes and a additional mounting bracket.

Well I had removed the L114 loader and man what a difference from taking the 7308 off of the 1320! Does anyone have any tips on the re-installation process? The upper pins have to come in straight to hit the grooves at the proper angle. I imagine after a few time it will become old hat but the...

Does anyone have any experience with the Worksaver Post hole digger? I saw one for sale in the local paper and was going to check into it but thought I would do a little research first.

I have a chance to buy a Rhino SE 5 brush cutter. Anyone priced one lately. this one is in good shape with the belt shields front and rear. Guy is asking $750.00 for it.

Does anyone have a CUT equipped with a cab? I am looking at a cozy cab for my DX33. I can't think of anything more enjoyable than going out in the dead of winter at night and plowing snow in the comfort of a heated cab. Any thoughts and pictures would be great too would be appreciated!

Now here is the ultimate .... RTV

Anyone need a 60\" 914A MMM I bought a 60" 914A MMM for my 1320 and then wound up trading the tractor off for a DX33....not really a trader am I since it is the same as the TC33, just that nice red color! Anyway I have a MMM that I have no use for now. I won't post a price since that is...

Surfing the bay and came across these... forks If you are close might be a deal.....shipping might cause them to be less cost effective,

I stopped by my case IH dealer today and was checking on a tooth bar for my 60" bucket. He had one available from Case for $136.00. I questioned the ability but he said it would a good one so we ordered one. Will let you know how it turns out, also ordered my first rear hyd. remote for the...

I am looking at a Gill Soil Pulverizer that is 6 1/2' wide with the double rollers. Do you think the DX33 will have enough power to handle it? Should come in around 750 lbs or so.

Well here are a few pictures of the new DX33. You'll notice the two future operators. There sister and mother wouldn't pose for the camera.

Well I used the new DX33 today for an hour or so and thought I would post a little comparison between old and new, the old being a 1320 NH. The new DX33 definitely has more power than the 1320, using my 60" RFM in some tall grass was not a problem at all. The deluxe three point was a dream when...

test http://www.tractorbynet.com/forums/userpictures/1688.jpg

test

Well the new DX33 was delivered and I got her out and did a little mowing with it. I had been mowing for a while and then noticed oil on the hood, joystick and scattered here and there. I stopped to check it out and popped the hood and the underside of the hood was soaked in hydraulic oil. I...

My local Case IH dealer has a new '04 DX 33. My 1998 NH 1320 HST 4x4 is in great shape and has 392 hours on it. It is also equipped with a 7308 loader and 68" bucket. The local Case IH dealer is wanting $8500.00 to trade. He is allowing me $14,000.00 for the 1320 and claiming the DX 33 list for...

My local dealer has a new '04 DX 33. My 1998 NH 1320 HST 4x4 is in great shape and has 392 hours on it. It is also equipped with a 7308 loader and 68" bucket. The local Case IH dealer is wanting $8500.00 to trade. He is allowing me $14,000.00 for the 1320 and claiming the DX 33 list for...

Well my last post went without a response so I have another question. Since I have always used a rear mount finish mower the quick tach loader has never been an issue. I picked up a 914A MMM that is lacking some of the mounting hardware. Can I use the MMM with the loader? Looks as if there may...

I just purchased a 60" MMM deck for my 1320. I am in need of pictures of the mounting hardware for the mower and a parts list. Does anyone know of an on-line source for diagrams? Would appreciate any pictures. I am sure I am missing parts for the mounting brackets. Thanks, Cliff

I subscribe to this magazine called Farm Show. They have a lot of great ideas that are born in the shops of some very talented farmers across the country. Here is a picture and description of a quick hitc a guy built using pintle hitches. Looks pretty neat. Similar to Pat's hitch.

I purchased a remote valve for a 7309 loader to try and implement it into a T-N-T system for my <font color="blue"> 1320</font> . I have decided to go with the factory setup for the rear remotes instead. If anyone knows of someone needing the loader control valve for a 7309 loader I have one...

I am in the market for a zero turn mower and looking at both riders and walk behinds. Does anyone have or know of anyone that has purchased a Rich Convertible Mower or a DR Convertamower? This looks like a sweet setup except for the height of the seat when in the riding position. The price seems...

You know you are too busy when you can't check in regularly to this site. I posted a classified for this valve but wanted to get the word out to anyone whom might know of a dealer or someone looking to add a 7309 loader to their tractor. I have a brand new remote valve for a 7309 NH loader. It...

Greetings all! Been awhile since my last post, to much going on. Well we had 10 inches of snow Thursday evening and early Friday morning, the really wet heavy stuff. I was going to go hook up the blade and loader and give <font color=blue>Little Blue</font color=blue> a little excercise and as...

While at the Farm Show last weekend I checked out the LandTrac 300 DTC & 360 DTC. I must say they are a fairly impressive tractor for the money and guess what! They have dual spool double acting rear hydraulics, standard! Maybe the <font color=blue>b</font color=blue><font color=orange>i</font...

Well it happened. I was sitting in front of the computer today (stuck home because of weather) when my neighbor called and asked if I had my loader on. I said it could be in a couple of minutes. It has been raining all morning here in NW Missouri and water and slush were running everywhere. It...