Search results

Question for you 10 series cab tractor owners. I have a 6110 here that the side air vents blow little to nothing on the side and rear windows. I lifted the cab roof to inspect and discovered that only the vents that are ducted are up front. Side and rear vents are not. Are you guys with these...

Working on a Case 1830 SSL Brakes . Need to find Hub, Drum ,Shoes. Any ideas? Parts seem hard to find

This is an FYI post to you owners that are having issues with you tractors or dealers. Mahindra has DSMs (District Service Managers) Located to cover the whole country. EVERY dealership has one! There job is to resolve dealer and customer issues. If you are having a problem make sure to have...

Sure like to hear the thoughts of the dealer techs on mTAR. Private message please.

Its that time of year again. Sure enough I'm seeing lots of frozen fuel filters. This is an FYI reminder for you owners to purge the H2O from your filters especially tier 4 owners. Tier 4 engines will run poorly ,code and derate even with the hot fuel recirculation. Even with the WIF sensor the...

Just a heads up for you geared tractor owners. I've been seeing a few tractors with the clutches seized to the input shaft splines. Mahindra has been stingy with the warranty with this issue. If you have a tractor with the clutch pedal lock use it. :eek:

Just curious if anyone out there is using the Mahindra " ARCTIC BLAST " fuel treatment in there tractors. Just seen the stuff along with " DIESEL POWER " fuel treatment at my dealer. Wondering how well its working in the cold climate parts of the country combating water in the fuel and gelling...

Need to flush a SSL hyd system thats contaminated with H2O. What are you guys using in your Bobcat equipment? Bobcat fluid is about $ 14 a gallon. Anything cheaper out there for a flush? :confused3:

You can't!:laughing: Just kidding. you can but it requires some knowledge and tools. 2 things need to be done to allow the unit to be moved no matter what model you have. Release the brakes and allow the oil to move in the drive circuit. Releasing the brakes is done by using a porta power and...

Greetings. Got a 1830 with what I think has a carburetor problem. This model has the Renault gas engine. Engine runs fine at high RPM. Idle and lower RPM the engine slowly looses RPM and will stall. It makes me think the low speed circuit of the carb is blocked or if there is and low mix adj it...

Battery/No crank problems can be frustrating. Most times the solution is simple. Finding it is the hard part. Here are some simple tips to try before you spred your tractors electrical system over the floor. First of all make sure your battery connections are clean and tight. Make sure the...

I've noticed a few posts in this forum about issues that Bobcat has known about since the tractors were introduced some time ago. These issues have been addressed and solutions are available. If you have issues like leaking oil coolers, leaks , cracked tube lines, shift lever problems you may...

Just learned a very expensive lesson about fuel additive. More is not better. You owners of the Doosan engine tractors pay heed. Seems to much additive can dry the fuel to the point that it looses its lubricating effects on the HP pump. The pump begins to wear and send particulate into the rail...

Just saw the new E-MAX with the Kukje engine. Nice running tractor. No ECU.:cool2:

Mahindra has recommended not using block heaters on E-MAXs because of the engine being an indirect type fuel injection system. Block heaters fool the ECU and don't turn the glow plugs on. Just learned that ECU can be reflashed to change temp sensor range and allow the glow plugs to cycle if a...

A word of caution for you MAX and EMAX owners that have belly mowers. If you are mowing very high grass or weeds do not back up with the PTO engaged. The PTO shaft has a tendency to grab and wrap the weeds or grass around the shaft at the seal. This is causing the seal to fail and leak. :eek:

For those of you that have a 2555 and the MIL light is on check with your dealer for a reflash. Mahindra has just released new software. FYI its NOT warranty. It will only take care of specific P codes that cause the MIL light to come on. :thumbsup:

Got a FS90R here that wont throttle up. I'm a little out of my wheel house with 4 strokers. Exhaust port and spark arrester are clear. Throttle cable and butterfly are OK. Any thoughts?:confused3:

Just learned through the grape vine that ECU equipped tractors are slated for another reflash later this year.:eek:

This is an FYI post for those of you that have that pesky swivel seat that cuts the seat switch pig tail. There is an update kit to address that issue. costs about $10.00. :thumbsup:

This is a post to those who have just bought or are considering a 2555 make sure the ECU has been reflashed. The MIL light will haunt you if not.There is still some old stock sitting on dealer lots. Dealers are supposed to reflash all units in stock but we all know how that goes. The reflash...

This is a FYI post to those that have a 3016 or 3616. Some of these units have been experiencing repeated failures of the glow plugs. It has been discovered that it is due to the glow timer being back fed through the fuel solenoid. The repair is a simple diode added to the wiring harness...

Greetings. I'm servicing a Brutus 3650. Need to change the transmission gear case fluid and front diff fluid. Manual says to use Polaris AGL gear case fluid and " demand drive" fluid in the front diff. What can I get get at my local auto supply that will work? What is the viscosity of the AGL...

Sure would like you thoughts or experiences with synthetic oils when used during engine break in. I have a new Scag customer that has a 35hp Kohler EFI engine. After his first oil change he was complaining his mower was consuming oil but there were no visible leaks and no smoke. He has had to...

For those of you who have purchased a new E32 or E35 with in the last year or so and are having cranking issues, here are some things to check. If you have a Kubota engine check the engine to frame ground. Kubota equipped excavators have had issues with the ground eyelet breaking on the counter...

I just learned that Mahindra has increased the salesman's commissions as of April on certain models. They are the 3500,5500,series and the M Power/Force. Don't let the salesmen push you into something you did not want. :alert:

Just seen a new product on the Mahindra dealer site. " GloPower" It's suposed to bring that faded red back to like new. Has anyone seen it at there dealer or tryed it? :sun:

A recent call from a customer reminded me its almost that time of of year for AC. If you have been putting off or have never had your HVAC serviced,now is the time to do it. Some of the simple things you can do or check yourself. One of the biggest complainants I get when its 90+F outside is "My...

After seeing a few threads about mounting bolts coming loose and blaming the dealer I thought I'd chime in and remind/point out there is a service interval for retorquing mounting hardware. It is in the operators manuals. look close. It can be hard to find. I highlight the manuals for my...

Just another heads up for those of you who are looking at purchasing an Emax. Just got a call from a customer from another close by dealer. He had just taken delivery of a new EMAX and right off the truck it was creeping.Dealer told him it was OK, they do that. NOT ! :confused2: Make sure you...

Just a heads up for you owners with Mahindra attachments. KEEP YOUR OPERATER MANUALS in a safe place. Dealer part look ups for attachments are an abomination. Your op. man. should have the parts breakdowns and numbers. :thumbsup:

Though I posted a thread about this subject before but could not find it to bring it to the for front in light of some new posts that I'm seeing about problems at dealerships.This is the time of the year that tractor sales are at there hightest point. CHOOSE YOUR DEALER CAREFULY! Especially if...

Anyone out there with newer SSLs having problems with there power Bobtach not working? Are you finding or was the problem contamination in the Bobtach valve? I'm hearing scattered reports of this problem. Bobcat seems to be doing the 2-step on me. Seems strange they have already changed the...

Just a heads up for you owners of open station 2555s. I just saw a TIB from Mahindra dated Nov.2015. Seems there have been issues with water getting into the key switch causing the engine to crank over. If you have one of the units in question you should have been contacted by Mahindra by mail...

OK we all know Mahindras leak. Anyone out there with an E MAX noticing a slight leak around where the HST mounts to the front of the trans? Just below and to the left of that pain in the:censored:HST filter? Maybe a few drips on top of you MMM. The unit I have in here now is the 4th or 5th I've...

What the flying frog is the easiest way to reinstall a PTO shaft when you remove it to service the deck? How are you people doing it? I'm struggling every time I do one. Seems like there is just not enough room to get at it.:confused3:

Anyone out there know if an after market FEL is available for a CT 122? Will a kioti FEL fit?:confused3:

Its recently come to light that Mahindra is having issues with the 2555 and 2565 tractors. Specifically EGR /MIL light coming on. Poor or not very hot heat from cab units. Temp gauge not moving off peg in cold weather. Engine spudering/puffing smoke. If your an owner of one of these tractors or...

Got a Toolcat here that might need an alternator. Service manual has me removing the cab to replace the alt. Looks like a real pain in the you know what. Anyone remove a cab yet?? interested in your thoughts. Does and don'ts.:confused3:

For those of you that have ACS machines and don't get it to the dealers for service here is something you can do that can save you some big bucks.It may also speed up your cycle times. You can manuely calibrate your lift and tilt actuators. Your will need a helper or a bungy cord. Follow the...

Got I hope not to dumb of a question for those in the know. Does water stay separated from fuel in the filter with the engine running? Does the fresh flow of fuel from the lift pump stir it up like shaking your salad dressing?:confused:

It was suggested I post on this forum. I have a new Bobcat 6530 that wont get out of its way going up hill. Curious if anyone out there has the Bobcat or Polaris version of it and what they think of the slow ground speed.Seems this has been an ongoing issue.:confused3:

Hope this is an OK place for this post. Anyone out there with the Bobcat hydra static utility vehicle or Polaris version of it? I have one here that won't get out of its way climbing hills even in low range. Did a little research a found this has been an ongoing issue. I have the newest model...

Curious if you out there with MAX tractors are seeing any fogging of your dashes? If so are you storing your tractor inside or outside. :confused:

Got a question for you out there for those who have a 2555 tractor. I noticed on the one I have seems to be a bit sluggish on the throttle response. Told this was the nature of the beast since it is flyby-wire. Anyone out there notice this?:confused3:

Greetings. Got a friend that wants me to do some repairs on his tractor including a new clutch. Anyone out there that has done the clutch?? I'm trying to find out what I'm up against before I take on the job. Unit has a cab. Will it need to be removed to split the tractor?? I have a full shop at...

Greetings. Got a new "G" series Toolcat here that I noticed when stopped the wheels will only turn a few degrees R or L when a turn is commanded. I noticed it when I was trying to align the rear wheels after taking the unit out of AWS. Had to make the unit move a little to achieve full...

Greetings out there. Anyone have the Fram or other manufactures PT# for the main HYD filter. I'm sure the JD filter is far to much. Thanks.

Any one out there seeing any leaks from there spool valves on there FELs?(MAX series) Had Lift seals fail twice on same unit! Bad valve or lifting to much weight?:confused:

Greetings. I need to tap in to a fuse box that uses mini fuses for some accessorys I'm adding. I've been told there is a "fuse tap" that plugs into the fuse holder and has a wire pigtail on it. Anyone know of these and where to buy them?:confused:

Curious to know how many of you out there with G series or newer machines that are having there software updated at least once a year. Is anyone with Bobcat attachments having there smart tach,s updated? (ACD controler on attachment)

For most of you out there with Bobcat SSL's or toolcats. G series and newer will give you a warning when there is a problem. It also has the ability to record and store warning codes in the Bobcat controller. This is a handy feature for those considering buying a used Bobcat. It may be worth...

To those who are considering buying a Mahindra or any other brand tractor. Go the extra mile and research the tractor as well as the dealership your considering buying from.Not all dealerships are the same just like the equipment the sell. If you are considering Mahindra,see how long they have...

Thought I'd pass some info to those who have a A,B or early C model Toolcat or those who are looking to buy a used one.These units had a high rate of drive motor failure. Some at very low hours. If you have one of these models and the drive seems sluggish check it out before major damage is...

Anyone get to operate the new i series excavators yet? Seem a little under powered.Like to hear your feedback.

Curious too know how these new TIER IV engines are performing in the Toolcats. Anyone out there with one? Any issues?