Search results

According to an article at Bangshift.com (Available here: BangShift.com 8N Credible) the current land speed record is about 68 mph, set in 1935 by an Allis-Chalmers machine. There will be an attempt during Speed Week by Jack Donohue, a very accomplished racer himself, to break that record with...

Awhile ago my regular browsing of various classified services led me to a new tractor. It's a Pasquali 997, made in Italy sometime in the late 1970s/early 80s. It's not a Yanmar, but since it is in the stable with nearly all Yanmar machines, comparisons were inevitable, and I thought it might...

I had posted a similar thread in the Yanmar sub-forum, but Kensnelling recently posted some new-to-me numbers for the PTO speeds on his D2000. Since I have a D1800 and have always wondered about the PTO speeds, I was excited to see his numbers: D2000: 1 - 540 rpm 2 - 753 rpm 3 - 998 rpm 4 -...

I have ordered from Agrisupply for several years, and have always had a good experience. My last two orders have taken what seems to be an excessive amount of time to ship. I placed my current order 10 days ago, and even though nothing was backordered, it still has not shipped. I called...

I was going through some of my notes, and found a chart I had started keeping track of some time ago, documenting PTO speeds for different grey market tractors I own or might encounter. I thought it might be useful to others if I put it up. I was derelict in my responsibility to keep track of...

On the theme of Yanmars for sale in California, this just came up semi-locally to me: it seems quite cheap for what it is, especially with a loader. Yanmar F475 4WD 50HP for $ale FARM TRACTOR FOR $ALE 4X4 50 HP YANMAR 4WD F475 W/ POWER SHIFT BE$T FEATURE OF THIS BEAUTY IS A HEATING &...

What is the worst case of a bound up PTO shaft anyone has had? I had mine today. I picked up an older Brush Hog brand cutter awhile ago, and decided to test it out today. When I tried to hook it up, I discovered the PTO shaft was stuck in the collapsed position. I've had this happen on older...

It really has nothing to do with Yanmars, except I put it on back of one. I got an offset vineyard cultivator, that I'm trying to learn more about. Pictures and a description are in the attachments forum, here.

I went to buy a tree auger to plant some fruit trees, and ended up coming home with more than I originally intended. I've never seen one of these before, and don't know anything about vineyard work. It's by a French company Humus, about which I can find nothing online. I thought it was kind of...

I've got an IH 464 that started giving me some trouble this morning. The hydraulic system for the lift and remote valves has largely quit working. I still have power steering. If I try to lift the three point, nothing really happens. The remote valves don't do anything either. I hear a...

I just picked up a Ford 1700 that needed a starter. While I waited, I wanted to start it and move it around, so I tried pull starting it. However, the clutch is slipping. The clutch disk has what appears to be ample material left: The ruler has a space of about 2 mm from the edge to where...

I'm looking for a replacement solenoid for a starter on my Ford 1700. I think it has a Lucas replacement. Neither Napa nor the only starter rebuilding place around here were able to find a solenoid or any parts whatsoever to rebuild the starter. The original is a Hitachi S12-62, I understand...

In another thread, Scotty Dive posted some information about the original loaders on some Yanmar tractors. He sent me some scans of brochures he has made. I've posted them here on my photobucket site. There are brochures for the GT14, YM169, YM180/187, YM220/226, YM276/336, and a Brantly...

I posted this same question in the parts section, but realized I may have better luck here. I need to couple an SAE A (11 spline 3/4" male connector) pump to my tractor, which has an SAE B (13 spline 7/8" female connector) end. What is the best way to do this? I can't find any direct adapter...

I need to couple an SAE A (11 spline 3/4" male connector) pump to my tractor, which has an SAE B (13 spline 7/8" female connector) end. Is there a source for a direct adapter, or a male ended Lovejoy (or similar) coupler to somehow link them? Thanks.

I picked up a YM240D last weekend. I needed a fuel tank and some odds and ends for some of my other machines, so called Wayne at LMTC. He was helpful and careful to make sure that I was ordering parts for the correct machine, and told me to check the serial numbers to make sure I really had a...

Are there any tricks to removing the transmission cover on a YM2000? (Part 16) I've pulled this part on my YM240 before, and it came off with 4 bolts. This time, it seems to be immovable. It has been immune to a dead blow hammer, blocks of wood walloped with a regular hammer, a putty knife...

I finally had something fail due to wear and not abuse or improper assembly. My YM240 has a separate hydraulic pump to power the loader. I had left the tractor at my dad's house so he could do some cleanup. After only a few minutes he called me and said the loader wouldn't work. A quick trip...

This afternoon there was a tractor show at my house, and I was invited. It started innocently enough. I moved some trailers out of the way with my newish-to-me B6000 (12.5 pto horsepower) so I could mow with my little riding mower, a John Deere L100 (17hp). I decided to take a picture of the...

I recently picked up a B6000 with a loader, box blade and spike harrow. (I documented the saga in the Yanmar forum , where I normally hang out.) Long story short, it had some wobble in the front end that I didn't catch before I bought it. The top of the knuckle moves in and out about an inch...

(This post may be misplaced, but since I have put spent so much time on the Yanmar board, it feels like home. I apologize if this is too chatty post, and will delete it if asked.) I made a journey to the dark side, and have gotten bit. Since the school I work for is on spring break, I've had...

My grandfather recently passed away, and among his things was this old crawler: All I know about it is what I remember being told as a child. It runs on gasoline to start it, and something else (Kerosene?) once it's warm. It's a McCormick-Deering, has a 4 cylinder engine with spark...

A couple weeks ago, my girlfriend succumbed to my recent spate of tractor activity, and learned to drive some of my equipment. She really enjoyed it, and has been wanting to grow a "BIIIIIIIIG garden." After she looked some, she now has a YM2000 to do her gardening with! It's all hers, and...

The D1800 has 4 PTO speeds. I'm trying to find out what output speeds they correlate to. Are there any other sources of information on these tractors? Thanks.

The school where I teach is working on developing gardening plots for the sixth graders. They don't have a tractor to use, and partly in thanks to my experiences at this forum I am apparently the resident expert on agricultural practices, specifically tractors and their implements. With some...

For a change, I have a question about a comparison between tractor models, rather than some maintenance or repair issue. A friend is looking at a Yanmar 186D. He has some implements (Brush-hog and disk harrow with roller) already. We have tried my 1401D on them, but they are just a bit too...

My project YM240 has revealed another area needing major work. This one, unlike the engine issue, is kind of my fault for missing in my inspection. On the front axle, the spindle is supposed to come up through the axle tube, in a bearing, then have a Woodruff key that splines the spindle to...

As mentioned in another thread, my recently purchased YM240 runs weakly and blows a lot of dark gray smoke. It will rev up to around 2200 rpm or so, but profusely pours smoke from the exhaust and lacks power. The motor was disassembled when I bought it last week, and I got it together and it...

I just purchased a Yanmar YM240 with a loader 2 days ago. When I bought it the motor was partly disassembled, supposedly to replace a headgasket. I got it back together and running, though my motor difficulties will probably end up in another thread, but for now, my trouble is with the loader...

Hi, I have a gas IH 284 that really lacks power. When it attempts to pull a load (even starting itself out with no implement or trailer) the engine bogs, stumbles, and runs roughly. With no load, it runs smoothly, but it is difficult to throttle up: opening the throttle, even with no load...

Hello, I just joined the forum to see if I can get some advice on tuning up my tractor.