Search results

I performed repair on same model nailer. After many years the plastic diaphragm fails regardless how much oiling is performed.

Wow!

Is this pressure or rpm? I have a BX24 that needs checking.

I have the same story on the DGS6500. Bought it due to having a TuffTorq K66 transaxle which is serviceable and can pull more. They are decent grass cutters, good travel speed, good cut due to deck design, parts are cheap. Deck set up properly it delivers a nice cut on zoysia. I had a few...

Eagle1... You have 4,500 hours on your bx2200... thats amazing but then again I guess not. I've seen some farm tractors with a lot.

That was quite a feat, landing at night between those buildings. It helped the plane had a low stall speed.

What do you use?

Do you use kill traps or are you trapping to relocate?

Thanks for that info..

I siphoned all the oil out of cylinder and filtered it. Took a high powered diving light and examined cylinder down to bottom and saw nothing. Took a wooden dowel wrapped it with clean white tshirt and swabbed out cylinder. I inspected tshirt area where in contact with bore and found no metal...

Yea there prices are too much. I would have liked to just order new rod and nut but just cant justify at this time.

The challenge is finding a competent shop that could get me back to work for 150.00 or less. Then there's the total time commitment. I 've spent 6-7 hours in time just talking and traveling with two shops just to figure out that who the qualified shop might be. Time factor of getting it back...

They did something to turn it down attempted threading and then shoved a 14mm nut on it. They knew it wasn't r/r serviceable and so they could only offer welding nut on. That picture is of it as it came out of cylinder.

That's an idea tapping the end for a bolt. Not sure how the bore would be threaded as I understand the steel rod is induction hardened and not easy to thread. This hardness is why shop went through two dies with no success but shallow mangled thread. My limited knowledge leads me to believe...

Updating. As you can see it pulled the nut off. Machine shop options in this area where machine is are limited. Ended up at what turned out to be a non qualified machine shop. They screwed it up by trying turn it down and threading with a die. They went through two dies and ended up with a...

What was the problem BH2720 backhoe? Good they are addressing the problem.

Try and bend it back. You might spend a bunch of time or get lucky and stumble on a shop quickly that would take it on. Still a lot of good in the structure just need some thinking and leverage to get it back straight enough you would not notice. I just broke my dipper stick hydraulic ram on...

I'll post up some pictures when I get it apart. Should be interesting. The piston still moves when commanded but it not attached to ram that much I can tell. If I could find a tlb more robust/faster cycle rate but not much bigger I'd trade up. It a good machine for it size and served me well...

I did a nice job in breaking my BX24 back hoe. On the dipper cylinder looks like I broke the piston rod where the piston bolts to the rod. Don't have it apart yet, waiting on spanner wrench to arrive. Based on how it went down and it floppiness now I believe the threaded part between nut and...

Saw this some years ago in Whiteville, NC. A little overloaded I'd say!

My FEL bucket single Hydraulic cylinder has lost its fix and has lots of play in it now. After 240 hrs and 7 yrs of back scrapping etc. it needs help. Anyone know what I broke inside and what would be reasonable repair cost. I can rotate bucket up and down with the controller but it can be...

From what I understand the 8166 came with a single cylinder 16 hp Briggs engine. How durable a motor is that and does it run pretty rough being a single cylinder. Do people avoid those Gravely riders that came with the B&S motors vs saying Kohler or Onan. I'm looking for a used rider and am...

There was a change in the fan guard, there is a Serial Number break, the new fan guard is slightly larger and will fit the older machines. There is no provision to provide this for free, you can purchase it from your dealer. Part number for the new guard is K2681-21212 Kubota Customer Service...

I can't seem to keep the inspection shield knobs from breaking on my bx with the RCK60" deck. There is a conflict between the lift arm attachment pin mechanism and the knobs. Three of the four are broken. Any ideas on what to do?

I have a bx24 with a 60" kubota mid mount mower deck. Leaves are coming and chopping them up is my goal. At the least I would like to get a baffle plate to block the deck discharge outlet. Does anyone know what the mulch kit part for the 60" deck. Thanks and happy tractoring

Is the hydro fluid used in a late model 2006/2007 bx24 the UDT named product. Do you use standard or Super? thanks

I can't for the life of me log on to the photos subforum to upload pictures for live viewing. It says i'm invalid. How to you get help on this. I've read the faq and can't find anything left to fix that would help, ie deleting cookies etc.. I want to be able to post pictures for live viewing...

I got mine delivered June 22. Not much activity on forum on this holiday week so here are some pictures. I am the beach but half wishing I could be working on my property with the bx. The last picture I would title, 'Wishful Thinking' or 'All in a Days Work'. I did drag those two tree...

I just took delivery of a BX24 Friday. While using it on a slope uphill from the lake it started to get away from me. On one occasion the fel hitting a tree stoped me. I was changing from high range to low to accomodate the low speed manuevering about to take place. Several other instances...

Do you think this tiller is too large for the bx24? Taylor-Way 3-pt hitch Rotary Tiller 48" cutting width 0 to 8" cutting depth Made for use with 20 to 35hp tractor with Category 1 3-pt hitch Weight: 553 lbs. Approximately 4 yrs old Less than 20 hrs of use Sells new for approxomately...

I'm lined up to buy a leftover BX24. I need to know after what tractor serial number would the manufacturing change/fix would have been implemented. I'm hoping someone who knows they have the new changes on theirs would post up the serial number. The one I'm suppose to buy is 55633 The...

I'm lined up to buy a leftover BX24. I need to know after what tractor serial number would the manufacturing change/fix would have been implemented. Thanks Eric

I got a good price on a bx24(14950 delivered) and a good deal on a changed mind unused 60" deck $1250. Drove to dealer in the boondocks to check it out. Seems he got it from another dealer in south central VA i think. I assumed he was getting from warehouse when he said he was having one...

Heres a BX24 for sale just EAST of Atlanta, GA. I don't know the guy but saw his listing. Trailer is available. 2006 with 25 hours 13000. Looks like a pretty good deal. 2006 KUBOTA BX24 For Sale at TractorHouse.com

Here some pricing for anyone shopping a bx24. Just ordered a '07 bx24tlb with the 54" fine cut deck. 14950 for the bx and 1550 for the deck. 100 doc fee. delivered 36 miles one way n/c. all prices before taxes. Most dealers are quoting 15500 for the bx. This dealer still made money...