Search results

I believe that Kioti built the Bobcat tractors and I am looking to add a backhoe to my 2013 Kioti DK55 and need too find a subframe for it. Since they don't produce this tractor any longer I would need to find New Old Stock or a used one. My dealer cannot find one. Does anyone know where one...

I am looking to add a backhoe to my 2013 Kioti DK55 and need too find a subframe for it. Since they don't produce this tractor any longer I would need to find New Old Stock or a used one. My dealer cannot find one. Does anyone know where one is or have a used subframe or subframe/backhoe...

I am looking to add a backhoe to my 2013 DK55 and need too find a subframe for it. Since they don't produce this tractor any longer I would need to find New Old Stock or a used one. My dealer cannot find one. Does anyone know where one is, or have a used subframe or subframe/backhoe...

I am looking to add a backhoe to my 2013 DK55 and need too find a subframe for it. Since they don't produce this tractor any longer I would need to find New Old Stock or a used one. My dealer cannot find one. Does anyone know where one is or have a used subframe or subframe/backhoe...

I purchased my Caroni from Agri Supply about 4 years ago. I lost the bearings in the roller which eventually ate up the bearing seats in the roller. I needed a new roller anyway due to several big dents in it from rocks etc. Agri Supply no longer carries the roller even though they carry...

I have purchased a piece of land in eastern OK. A portion of that is overgrown with medium to large cedars. Too many to cut and I don't necessarily want to bulldoze them as I want it to remain wooded (hunting land) but with natural species. The cedars are choking out the natural growth. Has...

I went to Cabela's in Fayetteville Ar and they had all kinds of tractors for sale painted camouflage. Anybody know what make they are??

Is there an American or Canadian distributor of parts for Nuffield, BMC, or Leyland engines. I need a head gasket kit for the subject tractor. Anglo-American parts LLC in Knoxville Tn. use to sell parts but I guess they are no longer in business. To order it from England is twice the cost of...

The driven disc on my YT16D484K spins freely on the hub which it is mounted on after reinstalling all the bolts. Is there supposed to be something between the driven disk and the mount disk? I cannot find a good exploded view of the assembly anywhere.

I need a head gasket for a 3/45 Nuffield tractor. These had a 3 cyl. BMC engine rated at 45 Hp. There was a distributor for BMC Leyland parts in Knoxville Tn. But he seems to be out of business. Is there another dealer somewhere in the US or Canada that would have these gaskets? I have found...

Has anyone removed the detents from your hydraulic remote valves? How did you do it? Was operation affected?

I recently tried to hook up my bucket grapple to the rear hydraulic quick disconnects of my brand new DK55. When I did they leaked. Not a drop or two, but a steady drool. I attempted to remove them and replace them with aftermarket ones of the same type (Pioneer). I could not remove them...

I have a three point hitch Chinese LW7 BH that was used on a Chinese tractor and used the remotes and standard 10W hydraulic fluid the transmission used 90W. I have purchased a Kioti tractor that uses the tractor transmission/hydraulic oil. Is there a simple way to flush the 10 W hydraulic...

New DK55 owner. Sold my Chinese KAMA 554 and changed my avatar. I mowed with my 6' Caroni flail mower for the first time today and I am pleased with the performance of the Kioti. It is much quieter than the naturally aspirated Kama 554. I especially like the open floor and rear TPH...

I know Branson tractors say they are American made but are they really or just assembled here. Where are the assemblies produced?

I just pulled the trigger on a new DK55 with loader. Chip from ARTRAC in Arkansas will be delivering it on Monday. I am trading my 55 HP Chinese tractor he sold me some years ago. Is there anything I should check on the new tractor or any known issues? I shopped several brands to include JD...

I looked at the new N4 Workmaster 55Hp 4WD with loader tractor today while looking at a local dealer in western Arkansas. I compared it to the Mahindra 5530 4Wd. the Workmaster was priced at 26,600. There seemed to be no room for negotiation. Is this a good price? Why is it $400 cheaper than...

I went to the local dealer in western Arkansas today and asked about the pricing on a 5055E with 4WD and a loader. Since he didn't have one in stock he tried convincing me I needed a 65 HP (which he did have in stock). I was told the 5055E is not in production and I couldn't get one until the...

I am looking at a 5530 4WD with loader at a local Arkansas dealer. He is asking $27,000 and he is firm on the first price quoted and will not deal. After looking here I'm not so sure this is a good price. It is actually $400 more than the comparable New Holland N4 Workmaster that he also...

I know Husqvarna owns Poulan but I hate the oregon chains sold in the box stores for the Poulans. I also have a Husqvarna and after trying an oregon chain on it I reverted to Husky chains. Husky chains stay sharp longer and seem to take a much more agressive bite. My question is this, Does...

I recently looked for new blades and clevis for my TM1900 Caroni flail mower and only found Agrisupply as the sole supplier. Their blade and shackle costs are over the top. They sell the shackle bolt and nut as seperate pieces. The blades are 3.49 (two blades per position) the clevis id 6.99...

How do I ignore a user? I seem to have a follower who feels the need to critique and correct my posts.

Is there a mechanical method of removing rocks from tilled soil (pto powered?)? What would the machine be called and where would one be obtained?

I just purchased a 15,000 watt PTO Generator from Rural king online for 799.99 + $100 shipping. These are the same ones that HF has for substansitially more.

Does anyone have a good crossover number for the fuel filter on my Kama 554?

I usually leave my log on set to "remember me" but could not log on from home last night. The forum message said I was using an unknown user name or password.

I just purchased a 6' Caroni flail and a new driveshaft was included with the purchase. I noted there was no slip clutch and did not see any shear bolts readily visible. Do you use a slip clutch with your Flail? I think the addition of one may require shortning the drave shaft.

I looked on E bay at a 6' 68" cut Bestco, heavy duty flail mower for $1,950 (EFGC-175). Upon doing a little research by reading the warranty I found it was made by Han-Sun Machinery. Does anyone know if these are being sold by anyone under other trade names? What is the quality like...

I looked on E bay at a 6' 68" cut Bestco, heavy duty flail mower for $1,950 (EFGC-175). Upon doing a little research by reading the warranty I found it was made by Han-Sun Machinery. Does anyone know if these are being sold by anyone under other trade names? What is the quality like...

I am finally getting to visit my property and Kama 554 tractor in OK. It's been a year since I was there last. My wife became very ill but has since recovered. I have several projects planned one of which is to install the bucket grappel I ordered (i'll take pictures if anyone is interested). I...

I have often heard, and read on the web, that a rear pull type trailer tongue weight should be 10-15% of the trailer gross weight. Does anyone know if this is covered in some federal or state regulations? If so what is the reg and where can it be found? I need this for my work.

I have a chance to buy a 1998 GT 275 and wondered what your opinions of this lawn tractor are.

I need some Hydraulic hose to operate my new grapple. it needs to be 3/8 inch and a working pressure of 2,500 PSI. I would like to use screw on removable ends like Aeroquip. Does anyone know an inexpensive supplier of these items. Since I am running hose from the rear QDs I will need quite a bit...

Here is a link to a site that is selling a PTO powered rotary plow. tytaninternational It looks like a disk cultivator but it is powered and seems to cut as deep as a plow. Does anyone else make something like this? Does anyone have experiance with one and how well does it work?

I was just asked by an elderly neighbor to look at his 1987 JD 2030 that his son just put a clutch assembly in. I did not take part in the installation so I can't answer specifics about what was done or not done. The old gentleman says the entire pressure plate and throw out bearing assembly...

I am looking for an inexpensive single shank subsoiler capable of being used in rocky ground (shale and sandstone mixed). I have looked at the King Kutter and it is only rated at 40 HP. Heavier ones listed on the internet are very expensive and their weight makess shipping prohibitive. I will...

I am looking for a 12 inch wide bucket for a LW7 Shandong produced backhoe. The Gulion produced LW7 buckets are available but do not fit. Does anyone have a supplier for these buckets?

I have replaced the battery in my 2005 Troy Bilt (MTD) garden tractor several times in the last 6 mos. At first I thought it was the cheap Wal Mart batteries so I bought a better one. I can mow about twice and the battery will be so dead it will not engage the blades or crank to start. I...

I picked up my LW7 back hoe from Chip at ARTRAC a couple of weekends ago and had not planned on messing with installation until the fall. A couple of good rainy days in Oklahoma last week changed my mind and allowed me the time to fool with it. Hanging it on the my KAMA 554 3pt. was no...

I was at my local Tractor Supply Co. and saw they are selling 25 and 30 HP Minot tractors. They say Proudly Assenmbled in Indiana. They look Chinese, are they, What make?

After having read many posts here and on other forums about mounting backhoes on three point hitches versus subframe mounts I am leaning towards wanting to mount my JW7 backhoe to my Kama 554 using a subframe. Does any one produce a subframe mount compatable with a Koyker loader on this...

After having read many posts here and on other forums about mounting backhoes on three point hitches versus subframe mounts I am leaning towards wanting to mount my JW7 backhoe to my Kama 554 using a subframe. Does any one produce a subframe mount compatable with a Koyker loader on this...

I just received a Kama 554 and I am agast at the poor quality of the manuals. From what I read here this is a common problem with all chinese tractors. Are better manuals available anywhere? I would like real maintenance manuals on teardown and rebuild, to include the engine, and operator's...

Recently a local dealer started carrying Bear tractors. The ones he has are bright yellow in color. Can anyone tell me who makes these?

Hi I am new to this board. I have a KAMA 554 on order and the dealer told me the engine has been derated from 55 hp to 50 by reducing the max loaded rpm. This is done to meet EPA/import regulations. What I would like to know is, how to readjust the fuel pump govenor to deliver the reated 55 hp...