Search results

I was having a similar issue with my 2007 BX24. It would run gerat for a while and then bog down as if it was out of fuel. I replaced both fuel filters, the fuel pump and the fuel injectors. I thought that would fix it. I was wrong! I removed the fuel tank (PIA) and poured the fuel through a...

Sounds like an issue I had with my Case 580SE backhoe. My lights worked, but when I tried to start it I lost all power. I thought it was the 4 year old battery and replaced it. No joy! After scratching my head for a few hours I found that the ground wire was corroded at he lug, under the shrink...

I have plans to use my "home-made" clamp on forks with additional forks and a top claw to make a small grapple. I had my property logged last year and still have piles of small trees and branches to move to the burn pile. My Kubota BX24 is very limited on the amount I can carry that way, but the...

I used 1-1/2" x 3" steel channel. I have been using mine for about 5 years with no proble. I have moved 16K generators, lumber and household goods using them!

I have been having issues with my BX24 for the past year or so. First the starter would not work with the key switch. After many hours of lookng for wiring problems, I added a push button starter switch. For the past few months I have not been able to kill the engine with the key switch. I have...

I have some "Home-Made" clamp on forks. they work great for most things. My tractor is a 2007 Kubota BX24, so I have limitatoins on how much I can lift. I have found those limits many times! I have bent my bucket at the clamp points, but not a big deal. I considered the QA option so I can get a...

If that is what I think it is....It's gonna cost! It looks like a valve and spring from the HST valve blocks. I had to replace them on my BX24 a few years ago. $350+ each for the valve blocks. My question is How did it get outside the transmission casing? There would have to be a sizable hole in...

I see many useful attachments that are made for SSQA compatible machines. Where can I find and adapter for my 2007 Kubota B24D? I am looking at a Rock Bucket for my FEL. Possibly a grapple too!

I have a leak on the loader valve for my BX24d. The leak is coming from the caps for the spoolers. My WSM only identifies them as a "plug", and the parts breakdowns that I have seen only identify them my letters (A) and (B). The leak is from the ends when I use the loader. Both curl and lift...