Search results

I noticed the four bolts holding my left front gear box on, had come loose the other day. The front axle had drained of oil (not good). The bolts that came loose are shown highlighted in the picture below. It doesn't appear there's a gasket or seal on that interface, so I just tightened the...

I have a JD 4300 that overheats within about 5 minutes of first crank. I'm assuming this is the thermostat that likely needs to be replaced? Belts look fine, plenty of coolant. Anyone know if the JD thermostat M811034 would be interchangeable with something I could get at the auto parts store...

I have a 420 cylinder that is always out of level by about 3/4". For a while I just thought the loader was bent. I know my bucket cylinders need to be rebuilt, as they move at very different rates without a bucket attached, and one is leaking pretty good. My question, could leaking lift...

I'm looking at a 2005 JD 3520 (no cab), with about 360 hours. Appears to be fairly clean, with 300cx loader. $15.5k is the asking price. My question is... 2005 was the first year for the 3520. Any issues with the first/early model 20 series tractors? Price reasonable?

I have a 420 loader with serial number 9759 with a bucket cylinder that is leaking through the small hole in the side of the cylinder - see attached picture. Based on the parts diagram, it looks like this hole is where the Tie Band/Wire lock is inserted, but this is my first cylinder rebuild...

I recently purchased my first tractor, a JD 4300. I has the 420 loader on it, but the mechanism that allows the loader to be parked was all removed (handle, rod, spring, etc). The front frame (that connects to the push-rod), which is ultimately the parking stand, has two bolts through it...

I have the opportunity to pick up a JD 3320 with about 900 hours, but no loader (ask price is $11.5k). There happens to be a 300x for sale locally that is brand new (2011 unused), but has been sitting outside, for $1700 ask. So curious, any concerns with buying a used loader that has been...

Hi all, My search for a tractor continues. I've started searching beyond my local area, beyond driving range. What's the best approach for having a tractor shipped? Prices are all over the place, and most brokers are just adding a huge markup to the shipping price. Is there a way to access...

Hi all, I have an opportunity to make an offer on a 2011 John Deere 4320. It has about 1200 hours and looks like a nice tractor. I was curious where this tractor stands with the emissions systems? Is this still considered a pre-emissions tractor? Any other issues to be concerned with on this...

Hi, I have the chance to pick up a nice John Deere 4610 for sale. I see this tractor was only produced for a couple years before the 20 series was produced. Any concerns over a ten series vs a twenty series? Since the 4610 was only produced for two years, I'm not able to find much data on how...