Search results

New tractor has been perfect for first 25 or so hours. Went to do some mowing on Sunday and something very strange happened. After mowing for a few hours, I took a break. When I went to re-start the tractor, I turned the key to the on position and everything lit up normally like it should on the...

I have 10 - 30 gallon trees I need to plant and was wondering if there is a way i can use my FEL to dig the holes. I want to dig the holes just slightly larger than the root balls. Bucket is 6 wide so I do not want to dig the holes that big. Thanks in advance.

Just back from mowing 10 acres with my new DK4510HS. Took 6.5 hours with the new tractor. Last time I mowed it, I used a New Holland Workmaster 33 and it took 8 hours. What really surprised me was the fuel usage. With the Workmaster 33, it took 11 gallons to cut all 10 acres in 8 hours...

Wondering if anybody has any experience with installing 3 board white vinyl fencing. I am getting ready to put up a bunch of it and would like to do it myself. Can this be a 1 man project? Looks a lot easier than panel fencing but I do not want to bite off more than I can chew. Have...

I have narrowed my tractor choice down to two at this point. 1 - DK4510HS from local dealer for $22,500. No options on this tractor. 2 - DK5010HS from dealer 800 miles away for $21,150. This tractor includes two sets of rear remotes, tool box and floor mat. I worked up the total price...

I've pretty much decided to buy a DK5010HS and one of the dealers I'm working with mentioned several new Kioti models coming out in 2018. Specifically he mentioned new DK models including DK4210SE, DK4710SE, DK5310SE and a DK6010SE. Only info he had on these tractors was that they were going...

My dealer is recommending a 6 foot rotary cutter made by Titan Implement in TN. I told him I would do some research and get back with him. When I search, I find lots of info on Titan Attachment which seems to be a Chinese importer with hit or miss quality. Both companies list TN addresses so I...

Hello. I am in the market for a new tractor and have narrowed it down to the DK4510HS or the CK4010HST. I have 10 acres of flat land that I mow on a regular basis so I want to be able to pull a 6 rotary cutter at a reasonable speed. The rest of the time, the tractor will be used for loader...

Time for a new tractor. Trying to narrow my choices down lately and have found both a 3032e and a 3320 that are both in great shape. Specifics: 3032e is a 2016 model with 60" rotary cutter, 60" box blade, FEL, 300 hours - $16k asking. Seller seems firm. 3320 is a 2011 model with 60" rotary...

Not sure this is the right forum but here goes. I plan to buy a new chainsaw in the next day or two. I have been through two Craftsman saws in the past two years and have had it with these saws. I have narrowed my choices down to the Stihl MS250 with an 18" bar and the Husqvarna 350 with an...

I am building a new home in middle Tennessee and decided to go over an introduce myself to my new neighbors this past weekend. I did not get three words out of my mouth when my new neighbor proceeds to tell me how displeased he is with the siting and orientation of my new home. He is used to...

Was loading some trash onto a burn pile on Sunday. Had the loader almost all the way up when suddenly I heard a loud pop and was getting showered with something. Took a few seconds to realize that a hydraulic hose had popped on the loader. By that time I was dripping wet with hydraulic fluid...

Had a bit of a scare yesterday evening. I was working on our motocross track on the farm and was carrying a full bucket of clay down a steep hill. Front end dipped into a hole, back wheels came off of the ground what felt like about 3 feet. Rear of tractor began to swing around and got...

This is the first time I will have had to change the hydraulic oil, filters, fuel filter, etc. for my tractor. Below is a list of what I think I need by reviewing the service manual. Can anybody please confirm this for me and fill in the blanks? Thanks in advance. I was going to go to...

Does anybody know anything about the New Holland in Nashville that is sitting off of Old Hillsboro Rd just north of Franklin? It has been sitting in a field for several weeks and it looks like the rear axle snapped. The left rear tire is laying on the ground and the rear end of the tractor...

Took off work early this afternoon to head down to the farm and do a little tractor work. Got on the tractor and mowed for about 10 minutes and noticed that the left front tire was low. To make a long story short, on the way back to the barn it went completely flat. Plugged a small hole and...

I have about 60 acres in hay fields in middle Tennessee that have not been harvested or maintained in quite some time. I bush hogged them recently and noticed that some areas are overtaken with weeds. Is there any advice on what I should use to control the weeds? I have a 3-pt mounted...

Guys, The bucket on my TC35DA has 3 strange looking cuts in it. There is one in the middle and one on each end. I asked the original owner what the cuts were and he said he had no idea and that it came from the dealer that way. They look like a Kindergartener with a cutting torch made them...

Howdy, One of my fields is covered with softball sized rocks. I have no idea where they came from but they are destroying my bush hog. I have tried to corral them with my landscape rake with mediocre results. Is there a better way to deal with these rocks? The field is approximately 20...

Guys, Does anybody know what the best place to get a operators manual for a TC35DA is? I bought the tractor used and the local dealer will only sell me parts at list price. Seems a little strange to me but I guess I understand. I am checking a few different dealers today but am looking for...

Guys, I need a few bits and pieces for my TC35DA. Is there a good online resource that sells below list? I need a new steering wheel and the right rear turn signal housing. I also have a messed up grill that I would like to buy replacement parts for. It looks like the previous owner stuck a...

Guys, Picked up my, new to me, TC35DA last night and cannot get the cruise control button to work. It is a toggle button on the right side of the operator. It turns green when I turn it on but the tractor stops when I let off of the hydro pedal. I got to thinking about it last night and...

I am in the process of trying to buy a 2004 TC35DA with 16LA FEL. Most of the TC35's that I have seen have a pretty fancy looking joystick for the FEL that resembles something out of an F-16. The tractor I am looking at has the traditional "knob on a stick" look to it. It looks to be the...

Guy up the road has a 2004 TC35DA w/ 16LA FEL with 342 hours on the clock. Tractor comes with two 6' bush hogs, 2 rock rakes, and a fertilizer spreader. The tractor is in average condition. It looks like he kept it outside. The steering wheel rubber is dry rotted and needs replaced...

Hello All, It's been a while since I have been on here because I sold my Kubota several months ago and recently moved to the beautiful state of Tennessee. I recently purchased 51 acres and need to buy a tractor to maintain it. The land is a 50/50 mix of woods and pastures. My primary use...

I am getting ready to move from Florida to Tennessee and do not want to move my tractor. I would like to sell it and buy a larger one once I land in TN. It is a 2005 B7510, LA302 FEL, 60" MMM, 4' welded box blade, turf tires. Tractor has 70 hours on the clock and has been kept in my garage...

Guys, My B7510 HST turned over 50 hours this evening while I was grading an area around our new pool. I would like to perform the 50 hour service myself and was hoping that I could get a parts list of what I need to buy to complete the service. Any and all help is appreciated as always...

Hello All, I am from SW Florida and have been shopping for a 2210 for the past few days. I have gotten quotes from two dealers so far for the 2210, 62" mmm, 200CX FEL, and BB1048 box blade. One quote was for $16,039 and the other was for $16,374. Am I missing something here? That would put...