Search results

Hi Folks, A small fluid seepage at the gasket (not seal) on my right rear axle on my TC34DA makes me have to put a drip tray down. Would like to try re-torquing to see if that stops the leak. Anyone know the correct torque on those bolts? Jeff

While carrying a large sprayer yesterday, I noticed that when going downhill on bumpy terrain the 3-pt was lowering itself. Not good, as my sprayer would start dragging on the ground. I think the problem is the raising and lowering lever, which would move due to the orientation of the tractor...

I've been trying to find a suitable trailer for carrying debris with my compact tractor since my bucket fills up far too quickly. Usually, I keep piling the branches on until I can barely see to drive. Maneuverability is a plus. Then, the new Northern Tools catalog arrived and I saw a nice 3...

Man, I've read through the manual several times and cannot find the correct lubricant type for the front axle (has diff and final reduction gears). It could be hydraulic fluid or maybe 90W gear oil. Don't want to guess. Anyone with a similar 4wd NH that can help clear this up? :confused2:

Thought I would close this one out showing the results. First, I hung 265 pounds off the front (first photo) and went out to try out the tractor on a steep incline with the full spray rig on the 3 pt. The front wheels immediately slipped and started going sideways. I let out 50 liters of...

Just wanted to close the loop. I got custom wheels from Hey Manufacturing for a reasonable cost and they built them like I wanted - W-I-D-E. As you can see in the photo, I've got a ton more stability. Happy camper!

I think most of the NH compact tractors come with a very small bracket for front weights that's about 6 inches wide on the flat part and has three holes (see attached photo). To get more than 200 pounds on there you need an add-on bracket that my NH manual calls out as part 718233006 kit, but...

Hi All, I'll take delivery of an 80 gallon sprayer this week and to use it most effectively, I'll be removing my FEL to more easily turn around at the end of my vineyard rows. The sprayer plus 50 gallons (that's all I dare carry around my steep vineyard) comes to about 800 pounds when full. My...

Hi Folks, Anyone have any experience replacing a rear axle seal on a small New Holland? At first blush it looks like the axle housing may have to come off. Major or simple? Will I need a manual? Norcal

Hi Folks, Shopping for ag R1 tires for my compact tractor for better traction out there on the hills and the four above brands look affordable and acceptable. Any of these I should steer clear of?

Hi Folks, I have been looking for tires and wheels to convert my NH TC34DA to ag tires and found that I can get a great deal on a new pair of rears from a Mahindra 4035 (14.9 x 24, diameter 48.5") on wheels that fit my tractor hole and lugs. Now, I need to make sure I get the right ratio of...

Folks, I am trying to change over from industrial R4 wheels and tires to Ag R1s on my New Holland TC34DA and got to talking with a Mahindra dealer out here. He says he puts together packages for Mahindras for about $1K. That's a big contrast with my NH dealer who is quoting me $3K. In the...

Deleted.

Hi Folks, Granted, each tractor, its attachments and the position of the attachments is going to be different and therefore give a different answer to this question, but I'm on the verge of ordering an inclinometer (looks like R&B Manufacturing is the one to get) to calibrate my...

Hi Guys, I think the tires that came on my TC34DA are called R4's. They are what I'd call a general use construction tire. They are pretty good, but in the steep sections of my vineyard they slip when it gets muddy. Anyone have any Ag tires for a TC34DA they would like to part with? Norcal

Do you guys order your hydraulic fluid from New Holland, or is there a better place to get it? I'm accustomed to finding my supplies at a location other than the dealer for reasonable pricing and good quality. Also, there isn't a dealer anywhere around here (Santa Cruz Mountains). I just...

Hi All, I just bought my first tractor and it came with what must be a top and tilt system that was added. The tractor has a gannon box scraper with a ripper and there are three levers on the right fender where I can control the tilt, inclination and ripper. Now, I want to remove the gannon...

Hi Folks, I'm searching for a 6' flail mower and find these guys called "Value Leader" that sell a new 68" flail mower, cat I 3 point for $1,550 with free shipping no less. Great value indeed. Only question is, does this stuff last?! I"m going to use it a few times a year in my 3 ac...

Hi Folks, We've been looking for a used tractor for our new 3 ac. vineyard and we're about to purchase a used, 2006 New Holland TC34DA Boomer Skiploader 4X4 Super Steer that we found and seems to be a good price at $12k including FEL and gannon. Anybody familiar with this model? Any issues we...

I'm looking for a compact tractor and shopping around. Funny thing when comparing weights. The Kubota 3200 is 1764 pounds. The Bobcat CT230 and CT235 are 3000 pounds! Go figure.

Hi All, We just purchased a 3 acre vineyard in the Santa Cruz mountains of California. I know we'll need to spray in the growing season and mow or disc the weeds. Your advice is welcome on what we should have to start. Norcal