Search results

First thanks' to everyone for the replies, now to the results. Feeling stupid as lines to the spool valve looked like they were in but they were not seated. Things are working as they should, Thanks' again

Well I guess this adapter plate is different than the one I replaced so when I get a chance I will fit a loop and see what happens. I will post the results when it's installed. Thanks for all the help.

The valve stays on the tractor. I never had this problem with the old valve that's the reason for my confusion.

There is no valve in the plate and I have removed the fel many times before while mowing and dragging my driveway and the 3 point always worked fine. Thank's for the response. (HV4902 valve)

I just installed a replacement hydraulic adapter plate for my fel and my 3 point stopped working. My loader is off the tractor, I put the blocking plate back on to use the 3 point while waiting for the new plate. I removed the new adapter plate and reinstalled the blocking plate and the 3 point...

Final update. Put everything back together today and my 3 point and fel are working like new. Thank you very much TractorTech for all the help.

Quick update, I could not wait for better weather as it's going to be nasty for several more days so I pulled the top lid again and removed the check valve. I think it was a big part of my problem as it was hard to get it out and was gummed up and the plunger was slightly pitted cleaned...

Ok I just downloaded the manual for this and should have done it to start with but anyway the only thing I didn't do was check the check valve so as soon as the weather gets a little better I will be pulling the top lid again and see if that is the problem. wish me luck or call me a ding dong we...

I am thinking of putting the old prv back in if I can find a new O ring and see what happens

If you are speaking of the old prv Im not sure as I have done so much but I think so

Yes I am sure, it is good and new O rings

After pump rebuild I had 2700psi at the pump, replaced the prv after no lift

Yes that is correct

Yes

Yes that is correct.

That is correct.

I did forget to mention that I replaced the internal O ring on the suction tube elbow and the seals on the crossbar while I had it out.

First thanks for any response to my issue I have a 1970 Ford 3000 with an FEL, had it for 8 years now and loved it until now. Went to lift a load one day with the loader and it would not lift and the pump got very load also no 3 point. I rebuilt the pump and had 2700psi but still no lift action...