Search results

Results 1 to 50 of 200
  1. L

    used L3400 with power boost

    Who ever traded it in bought it from Empire tractor in Cortland, NY. It is barely worth a third of the asking price based on the hours alone.
  2. L

    used L3400 with power boost

    I wandered over to where I saw the Kubota L3400 with loader and power boost today. It has 1,345+- hours and turf tires and a front loader; the idiots have left it in the raised position without the boom lock pins no less. It apparently has spent its life outdoors. It has a cement counter weight...
  3. L

    Flail Mower Let's talk flail mowers

    Hello and good afternoon Racenut, I want to welcome you as the newest resident member of the "Flail Mower Nations" from the Golden State. To save yourself a great deal of aggravation I want to suggest to you that you remove the spring clips and drill these holes on the recutting bars larger to...
  4. L

    kubota cars

    If anyone wants to go "kubota car shopping" there is a kubota tractor with a loader and turf tires but no belly mower at maguire ford in downtown Ithaca, ny. Its going to go fast. $15,999.00+ tax+dealer prep+plates+registration fees. HAA,HAAA; yes it was parked up front yesterday.
  5. L

    Flail Mower Let's talk flail mowers

    Please find a copy of the manual for your flail mower here for your use.
  6. L

    If I Only Buy One Piece of Equiptment...

    Having a drainage tile installer come in and lay drainage tile with a tile plow is more cost effective as the tile plow will be driven over the acreage first to allow the laser grade control computer to fix the starting point for the drainage tile and the end points where it drains into the...
  7. L

    JD 2305 w/ 47" JD Snowblower - PTO hitting Tie Rod Shaft

    Have you checked the tire pressures on your mule? If the skids are fully retracted and the tire pressure is low that may cause binding issues.
  8. L

    DelMorino Flail Mower Power Stall/Clutch?

    Greetings from the soggy Fingerlakes, Short of measuring the amount of backlash between the gear teeth that could create a power loss from excess space between the gear teeth this is the only reason there would be an issue with the amount of power transmitted from the PTO shaft to the right...
  9. L

    DelMorino Flail Mower Power Stall/Clutch?

    I want to welcome you as the newest resident member of the "flail mower nations" from the Great State of New Hampshire. About your beautiful flail mower built using excellent Italian craftsmanship: If that unit has a COMER gearbox that is very unusual. 1. The drum as you call it is what is...
  10. L

    Questions on JD 25A Flail Parts etc.

    I do not think your going to find one unless you call Wengers of Myerstown, PA to see if they have a 25A mower that they are parting out and hope that they do not act like the Samsonite Gorillas when pulling it apart.
  11. L

    Questions on JD 25A Flail Parts etc.

    Go to the the green parts store to obtain the exact part you need. www.greenpartstore.com
  12. L

    Flail Mower Let's talk flail mowers

    These flail shredders are designed to work in the fully elevated position as they are used for shrub rows on estates, cutting back berry can rows and in orchards growing tree fruit. The best thing you can do is purchase a orchard and vineyard flail shredder(ditch bank mower) large enough for...
  13. L

    Flail Mower Ford 917 Flail mower

    Hello and good morning KMoJo, I want to welcome you as the newest resident member of the "Flail Mower Nations" from the Lone Star State and Granger, Texas. The knife hanger link on the 918H helps the user avoid damaging the knife pairs by allowing the knife to swing back more quickly and out...
  14. L

    Flail Mower Let's talk flail mowers

    The only suggestion I have is to contact the dealer to see if your Sicma flail can be used with side slicer knives as you do not have re cutting bars mounted on the rear panel. A flail mulcher will cut the material you want to knock down but the hammer knives do not create the suction you need...
  15. L

    Flail Mower Let's talk flail mowers

    I am glad we cleared that up. You can adjust the rear roller with the mower in the vertical position too so just be careful releasing the bolts and slide it slowly outward to the point where you want to set it making sure you follow the manuals instructions.
  16. L

    Flail Mower Let's talk flail mowers

    Right now your beautiful flail mower is set to mow as low as possible as the rear roller is the same height as the side skids. Do you want to raise the cutting height? is that what you mean?
  17. L

    Flail Mower Let's talk flail mowers

    I want to welcome you as the newest member of the "Flail Mower Nations" from the State of Tenn. You will not be disappointed as you have purchased a high quality farm implement. Once you become more used to using the mower you will be fine and you will not want a bigger flail shredder for your...
  18. L

    Rotary Cutter Brush cutting for beginners...

    The more power you have in your mule the better; what do you know about tractors in general???????? A sub compact mule is out of the question unless you want to spend night after night mowing. You also need to know how much snow you have to deal with each winter to purchase a big enough snow...
  19. L

    Flail Mower Let's talk flail mowers

    By raising the rear roller you are lowering the cutting height; this is what you need to do to recut the material finely as long as the belts are tight and the gearbox is level-never mind the shaft.
  20. L

    Opinions and value of a John Deere 25A flail mower

    Hello wirlybird, Until you see what the flail mower shroud looks like and bang on the shroud near the welds with a hammer to see if there is a dull thud to assure you the welds are good I would wait for the pictures. This price is reasonable as the flail mower by itself for parts is a gold mine.
  21. L

    Flail Mower Let's talk flail mowers

    Hello and good morning Mr. Ledford, You have come to the right place for information about flail mower in general. The first thing you should really do is read the lets talk flail mowers and then come back and ask questions. My Brother in laws joke about a coonass was this; "What's the...
  22. L

    mowers.

    Check with every JD dealer with a 500 mile radius for a used JD290 finish flail mower and you will be able to manage your brush and grass with no issues.
  23. L

    Ram connection manifold?

    NOPE, NOPE, NOPE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! They look like the pilot operated double acting cylinders that came off of a JH Fletcher roof bolter and they will not work for a press as the pilot operated flow control valve blocks...
  24. L

    Flail Mower, yes or no

    Please take the time to read the flail mower thread and then go from there and ask questions and after that ask more questions and then start shopping as you will have to decide if you want a finish flail mower or a rough cut flail mower that is either a standard flail mower that is either an...
  25. L

    Aiemery Flail Mower

    I would not, I would invest in the smallest Maschio boom mounted Orchard and Vineyard Flail Shredder as it will provide you with both the side shift and tilt function OR purchase the desired Caroni flail mower and order the side shift kit for that implement OTHERWISE I would invest in a...
  26. L

    Flail Mower Let's talk flail mowers

    When you lower the rear roller you increase the mowing height, you do not lower the mowing height. Have you leveled the mower using the top link and a level on the gearbox to make sure the end of the level is facing the seat of your mule???? if the mower is allowed to tip forward you will...
  27. L

    Flail Mower Let's talk flail mowers

    You need to lower the rear roller to increase the cutting height and make sure the gear box is level using the top link to level it using a small level. The skids are not ment to be dragging on the ground
  28. L

    Loftness 3pt Flail (new to me)

    You need to change the oil first with fresh 90 weight gear oil and then replace every side slicer knife that is damaged or bent as it will affect the balance of the flail mower rotor. Loftness makes a lot of farm equipment and they have a national dealer network so obtaining parts will not be...
  29. L

    Flail Mower Let's talk flail mowers

    Hello and good afternoon Zeppelin, I want to welcome you as the newest resident member of the Flail Mower Nations from the great State of Wisconsin. If you invest in two or three furniture dollies you can screw 2 by 12's to the bottom of them and use them to roll the mower around on a flat...
  30. L

    FLAIL COLLECTOR ADVISE PLEASE

    Hello and good morning Malvern Michael, A flail Pick up mower like the Major brand will work but you will be picking up 15+ plus loads per half acre of food plot and then you have to transport it to wherever you want to dump it. The other thing is that the mowed brush will begin to smolder and...
  31. L

    Flail Mower Let's talk flail mowers

    Hello and good afternoon kenmbz, I want to welcome you as the newest resident member of the "Flail Mower Nations" from the S.E. Region of the keystone state. Happy mowing.
  32. L

    Terraced land

    The thing is that is you did that you would have a muddy wet mess the next time it rains. The other problem is what would you do with the dirt that was shaved off the terrace? The quickest way to help you with this is to simply purchase orange driveway markers to identify the terrace edges BUT...
  33. L

    Terraced land

    Hello MAcinnis, I want to welcome you as the newest resident member of the Flail Mower Nations from the great State of Missouri in the St. Louis District. How far are you from the old Henderson and St Joe mines??? Which brand of flail mower did you purchase with your mule and what type of...
  34. L

    Flail Mower Let's talk flail mowers

    Hello mwemaxxowner, The BX 1880 will work well with a 48 inch flail mower. I am sending you a PM.
  35. L

    Flail Mower Let's talk flail mowers

    Hello bigalege32, I thinkk it is a Mott flail mower, either way you can get parts for it and help from the Flail Mower Nations resident members.
  36. L

    Flail Mower Let's talk flail mowers

    They are made in Cambridge, Ohio by MOTRIM Inc. P.O. Box 850 43725 1-740-439-2725 They make a lot of boom mounted mowers and tree trimmers along with PTO and hydraulic drive flail mowers.
  37. L

    Flail Mower Let's talk flail mowers

    Good morning bigalege32, I want to welcome you as the newest resident member of the "Flail Mower Nations" from the Great State of Michigan. I am always interested in new reports of the resident sasquatch's and any reports of black helicopters. I worked with folks from White Pine, Michigan many...
  38. L

    Ditch flail mower too big for my Kubota?

    Hello and good evening Mr. Corazza if you decide on this specific flail mower for your current mule I would strongly suggest that that you add a loaded dual tire on the left side of the L6060. It would be safer and a more stable implement for you to purchase a boom mounted Maschio Giraffa M 47...
  39. L

    Saplings and brush around pond banks. Suggestions?

    Save yourself a lot of aggravation and purchase a propane weed torch and a 40 pound propane cylinder with a 50+foot long propane hose from the propane dealer for the torch regulator. It will look ugly for a while but if all you want is less work and aggravation get the "good" weed torch and the...
  40. L

    5' or 6' skid steer mounted brush buster?

    The mower/skidsteer forward speed is going to depend solely on the thickness/density of the brush. The small a hydraulic brush mower is the more able you will be to maintain the revolutions per minute required to mow. For the money and the work involved it your money would be better spent on a...
  41. L

    Flail Mower Let's talk flail mowers

    The forestry/flail mower attachments are heavy and require a huge amount of flow and torque because the forestry flail mower rotor heads are very heavy and require a huge hydraulic motor and flow rate to run the forestry mower. If that mule in your avatar is the mule you have perhaps you should...
  42. L

    Flail Mower Let's talk flail mowers

    Hello Jeff, The excavator size you describe has too little a flow rate for a hydraulic drive flail shredder mower. How difficult/time consuming would it be to cut slopes less than 15 degrees around these areas?
  43. L

    Flail Mower Let's talk flail mowers

    Hello Momower, I want to welcome you as the newest resident member of The Flail Mower Nations the the Keystone state. Happy mowing.
  44. L

    Flail Mower Let's talk flail mowers

    OY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! If you can buy thick tube steel locally that would be best. Do you have new rear roller bearings??
  45. L

    I lost my religion and a t shirt today...

    I would be sending some angry letters using overnight mail!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  46. L

    Ford 917L Special Flail Mower

    Hello wirlybird, I want to welcome you as the newest resident member of the Flail Mower Nations. Please fill in the rest of your details as there may be a fellow resident member of the Flail Mower Nations that is close to you and can help you if needed.
  47. L

    Flail Mower Let's talk flail mowers

    All the scoop knives/duck foot type knives are made from formed sheet steel and then heat treated after sharpening them in most cases The majority of side slicers knives are a heat treated flail mower knife. Many of the so called hammer knives are smaller thinner castings with...
  48. L

    Flail Mower Let's talk flail mowers

    Save yourself some aggravation and call every JD dealer within 500 miles on this side of the border and ask if they have have a used 25A in good condition for sale that came in on a trade. I would also do the same in calling any JD dealers in Canada if the search on this side of the border is...
  49. L

    Flail Mower Let's talk flail mowers

    Yes and with a 100 horse power mule you should have no issues with mowing with that flail mower. Your just going to have to be more aware of your mowing area. If by trail cutting are you referring to knocking down thick brush or saplings along with old growth brush?
  50. L

    Flail Mower Let's talk flail mowers

    No, you do not need the rear roller you will be fine without it.
 
Top