Search results

Results 1 to 18 of 18
  1. H

    Farmall Super A froze?

    Had my old tractor freeze , I think, you can pour water in radiator and hear it running into the oil pan. I stopped right there thinking it is trashed. Anyone have a good guess where the weak spot may be common to these tractors. I put antifreeze in but didn't crank it to circulate it. Tractor...
  2. H

    ford 907 flail burning belts

    My ford flail will pull the tractor 3 times as hard as my bush hog in grass knee deep.
  3. H

    Ladder attached to Loader bucket

    Makes me proud. I thought using my dump trailer for a high lift was maybe not safe for a 70 yr old. I had to fab the inside of the front to have something level to stand on when it was all the way up. With the dump raised and a pole saw I could reach 25 ft easy, maybe a little more. What you...
  4. H

    Zero Turn w/ Kawasaki FX850v: Mowing RPM / Full Throttle?

    Gas is coolant at WOT. That's what they all say.
  5. H

    4025 Front Counterweight

    Well I took it off, did not weigh as much as I thought, probably 100lbs. I guess 100 on the front axle may give you 3/400 at the lift arms extra.
  6. H

    4025 Front Counterweight

    Looks like 2 bolts holding it under the axle, trying to remove all weight I don't need. Simple as removing the 2 bolts and not effecting nothing else? Still thing about replacing the 3 rib tires with some flotation ones
  7. H

    Mahindra fuel filter replacements, Bosch

    My friend called and told me he thinks my tractor is fixed. After hrs of trying several things, cleaned the tank, replaced the flexible lines, filter a couple of times and I don't what all else. After all this it would pull 10 lbs of vacuum out of the tank. He then checked the petcock coming...
  8. H

    4025 Fuel System

    My friend called and told me he thinks my tractor is fixed. After hrs of trying several things, cleaned the tank, replaced the flexible lines, filter a couple of times and I don't what all else. After all this it would pull 10 lbs of vacuum out of the tank. He then checked the petcock coming...
  9. H

    Fail Mowers

    Need a set of blades, Been running the 1 piece coarse cut blade on my 917 Ford, Failmaster has a two piece heavy duty blade in their catalog. Wondering bout cut quality diff if any. These things have jumped in price. Anybody ?
  10. H

    Oil & Fuel Clogging fuel filter - cannot figure this out

    I should have added on my post, changed out the filter also.
  11. H

    Oil & Fuel Clogging fuel filter - cannot figure this out

    I am having fits with my 4025. Almost the same symptoms, thought I had it fixed, replaced the old flex lines with new rubber and clamps. Worked good for about 1 hr, ran perfect, then smoking and loss of power like before. Yep, that' my hair on the ground! Something simple is escaping my guy and...
  12. H

    Mahindra 4025 fuel tank cleaning.

    For the past few weeks, I have been plagued with the screen in the tank stopping up. It has been suggested pressure washing the tank then washing it with clean fuel to get the water out. I sure don't want to remove the tank. Someone suggested cutting the fuel line and install a cheap throw away...
  13. H

    Mahindra 4025 fuel tank cleaning.

    For the past few weeks, I have been plagued with the screen in the tank stopping up. It has been suggested pressure washing the tank then washing it with clean fuel to get the water out. I sure don't want to remove the tank. Someone suggested cutting the fuel line and install a cheap throw away...
  14. H

    4025 Fuel System

    Tractor was running rough at high rpm, changer the fuel filter. Now having problem with fuel coming from the tank. Is it gravity feed from the tank to the pump at the filter? Tractor has age on it but only 280 hrs Hard to blow air through a banjo fitting. Thanks
  15. H

    Tire Selection Mahindra 4025

    Need a change from narrow 3 rib front tires to a fat flotation tire of sorts. 2 wheel drive with loader, it will get stuck in a min. Please I don稚 want to break the bank and don稚 want to take the loader off and on. Thanks
  16. H

    Lift 4025 Max Height

    The way I read the book it seems to get more height (disc) use the lower pins on the tractor. Is this truth, looks like it would be the opposite. Also, the PC lever has a stop keeping it from going full travel. This stop has no thumb wheel for adjusting travel, it is somewhat solid, is this a...
  17. H

    Intake Manifol Heater

    Just discovered my 2011 4025 with 250hrs heater is not auto timing out, left the switch on and noticed the intake hose smoking a little. Living in central AL, do I really need this if it cranking ok? Remedy just take hot wire loose, This is putting a drain on the battery even while running. Just...
  18. H

    2011 4025 FEL Problem

    New to me . bought with 250 hrs knowing FEL had issues. Up and down works, bucket does not want to curl and has a (squishing)? noise in the loader valve. Friend has a truck shop and checked the pump, no problem. Talked to dealer and he thinks the valve is problem, problem is they want 850$ plus...
 
Top