Search results

Results 1 to 50 of 200
  1. LittleBill21

    Drone suggestion

    I am in a flight path as well. that said the air 2 has a ADS-B, which will let you know when a plane is in the area, it works incredibly well. i have seen it activate over 10 times with amazing accuracy. I always land when i get the warning I own a air2 not sure why i thought it was the 1. that...
  2. LittleBill21

    Drone suggestion

    i think the digital zoom is amazing for what it is, at least on my air 1
  3. LittleBill21

    Drone suggestion

    they will sit still in 15mph wind. i have flown mine at full speed. straight and wonder why it slowed down, when it got over head, it was pinned at 45% angle into the wind keeping it straight. I am comfortable flying it in my living room
  4. LittleBill21

    Drone suggestion

    i haven't looked at the air 2, I have the air 1, it does not have side avoidance sensors, never thought i would need them, but you would be surpised how often you fly sideways when filming something.
  5. LittleBill21

    Drone suggestion

    you be surprised, they are pretty easy, just try not to hit stuff, thats about the biggest thing.
  6. LittleBill21

    add lighting

    yep, 3a for lights 2a for horn. led lights should work for you though, not sure why they derate it so much, wire is thin, but its tied to the 10a fuse in the panel. something like this should work https://amzn.to/3B72BOb
  7. LittleBill21

    What is this? Perhaps a relay?

    thats a connector that plugs into something, relays are generally square boxes...
  8. LittleBill21

    add lighting

    near the mid pto lever side, driver side, blue tape? butt connectors, was in the same harness as the mid pto controls. look at this post...
  9. LittleBill21

    add lighting

    check the rear side, near the mid pto, there was a wiring plug on my 26 for a horn/lighting, was taped up, but had a label
  10. LittleBill21

    Polaris hot hand grips

    there are wires literally coming out of them....
  11. LittleBill21

    Grounding Questions, Electrical

    there is no requirement to add a 3rd ground per nec. you should not have separate derived grounds, it causes more trouble, all grounds should be tied to the same point, if they are all tied to the same panel.
  12. LittleBill21

    Dump trailer direct wire?

    take the battery out, if its already dying all the time, then your just putting a strain on the system to charge it, for what i assume is a short duration. I disagree about the ground frame, don't even change it, the wire kit will dedicate a ground wire up to the battery. otherwise you will...
  13. LittleBill21

    Max 26xl TLB

    if you have hst, there are 4 zerks for the pedals, 2 on each side. 4 on the front axle, none on the pivot, and apparently 2 on the 3pt that i have never seen, did you get the mower and mid pto? what did you pay? i used travelers, and there is a filter for hst and a filter for hydro, there is a...
  14. LittleBill21

    Max 26xl TLB

    @doneill127 picture? I have never seen them
  15. LittleBill21

    Starlink

    https://amzn.to/3lnQSGj
  16. LittleBill21

    Now able to move tractor from backhoe position. Push Button, 3D Parts, Should have come from the factory this way.

    not when i lift the rear off the ground with the stab jacks. you guys must have some seriously dry stuff. I can barely do the bucket pull trick, without ripping 3 feet of ground around here.
  17. LittleBill21

    Going back rural.... Can't wait, where to look?

    you want rural but 2 wired isp solutions? lol yea good luck.
  18. LittleBill21

    Hand held Brush Cutter

    SRM-410U Echo, I primarily use it with string head, but its primarily a brush cutter. I use this harness https://amzn.to/3muWVbk i cut between 3-4 hours, use about 100 feet of string, and 2 tanks of gas.
  19. LittleBill21

    Now able to move tractor from backhoe position. Push Button, 3D Parts, Should have come from the factory this way.

    Some of you may remember my complaining about not being able to move the tractor with the seat reversed, while using the backhoe. I thought this was crazy, as who just sits in one place and digs (guess I need to dig ditches). After trying a stick for about an hour i said screw it and designed...
  20. LittleBill21

    Redback 120 volt battery equipment

    seems like your mistaken https://www.homedepot.com/p/Greenworks-PRO-21-in-60V-Battery-Cordless-Self-Propelled-Walk-Behind-Lawn-Mower-with-2-4-0-Ah-Battery-and-Charger-MO60L424/315447186
  21. LittleBill21

    Starlink

    @cqaigy2 didn't you open this obstruction page via a browser page? @ponytug do you have a laptop?
  22. LittleBill21

    Starlink

    prtg is windows based only, just an fyi, so much easier then the linux variants, but up to you, whats your upload like?
  23. LittleBill21

    Starlink

    their entire cast including Michael came to Scranton, to the stadium. my wife had connections. i was within 20 feet of them for the entire thing. it was pretty cool.
  24. LittleBill21

    Starlink

    what speeds are you typically seeing? and yes without the apps, most people would never notice. you could do a basic pingplotter software if you cared enough, or setup something like PRTG if you really care... etc.
  25. LittleBill21

    Starlink

    are you really dropping internet every 20 minutes?
  26. LittleBill21

    Starlink

    why do you have obstruction? tree/house blocking? or not enough satellites?
  27. LittleBill21

    Starlink

    I have a AP on my roof, i have an arrestor on it, and i drip loop everything this is what I have...
  28. LittleBill21

    Starlink

    I'm a little shocked you can't get it yet, your only about 20 minutes from my location. I'm sorry maybe i was wrong. i was given a email to make a deposit, i thought that meant it was available. not sure why i would pay before its available, but i went through it again and i can still make a...
  29. LittleBill21

    Starlink

    i do not currently have it. but i put in for it. and was granted access about 3 months ago. I live near Scranton PA.
  30. LittleBill21

    Starlink

    that he still is buying the wrong access point
  31. LittleBill21

    Starlink

    Install your Starlink dish normally. Connect the power-brick to the (black) ethernet cable from your dish. Either plug in the white ethernet cable, or your own ethernet cable, to the other side of the power-brick, and plug the other end into your router. If it's not already setup that way, set...
  32. LittleBill21

    Starlink

    not really. i have routers in places that have quad nat, due to restrictions it runs fine. alot of people are behing cg-nat which is double nat and it runs just fine as well. the only time double nat is annoying is for port forwarding. and i have 2.4 devices that can do well over 100+mbit, more...
  33. LittleBill21

    Starlink

    it will have a firewall, if you don't need to do anything special. your prolly be fine.
  34. LittleBill21

    Showroom Shock !

    i have left my search email filters for a used tractor in place since i bought my mahindra, i use to get 1-2 a week. i haven't gotten a email in over 2 months. guess i should feel thrilled i got mine when i did.
  35. LittleBill21

    Rolled the rtv 900

    make sure to pull the plugs before you spin it over.
  36. LittleBill21

    JD 737 ztrak electrical problems

    a volt meter and a wiring diagram. start at the ignition side.
  37. LittleBill21

    Being dumb repairing winch

    i've learn sleeping on things overnight tends to help a lot with those kind of decisions, things are clearer for some reason the next day.
  38. LittleBill21

    Truck bed extender legality

    Hope you put a flag on it :cool:
  39. LittleBill21

    Truck bed extender legality

    Dude you seriously need to relax... Reading that much into a comment... yea I won't respond to your posts anymore... hope that helps you sleep better..
  40. LittleBill21

    Truck bed extender legality

    Wow, my comment sent you that far over the cliff? Maybe online forums are not for you, I actually find this to be one of the most relaxed and welcoming forums I have ever been on. If you simply ignored my comment, instead of making your comment which actually created the drama, there wouldn't...
  41. LittleBill21

    Meg-Mo swinging blades -- first impressions

    i strongly considered these, over a set of gators, my mother is a fanatic about clippings, starting to think i prolly should have got these, not thrilled about the lack of the star pattern, curious to see if that bolt is going to loosen or the assembly spin
  42. LittleBill21

    Meg-Mo swinging blades -- first impressions

    that bad, not even worth saying anything?
  43. LittleBill21

    Starlink

    your paying an upcharge to have someone preconfigure the equipment for you, then mail it to you. going to need more then in the buildings, especially if phones are expected to work. i wish you luck
  44. LittleBill21

    Starlink

    lol its preconfigured ubiquiti equipment. just realize if you think your going to do 25 acre's with a single antenna, your going to be extremely disappointed.
  45. LittleBill21

    Snowblower sizing

    larger, your only 7 short of the max HP, the commercial puts you in the middle and far enough from the bottom where you should be ok, just make sure the weight is not going to push you around.
  46. LittleBill21

    Deck "Caddy"

    where did you get the steel rod?
  47. LittleBill21

    Hauling Sub-Compact.

    lol it won't change anything when all 4 tires are locked up, and your still moving. learned there was limit to my atv's stopping capability
  48. LittleBill21

    Starlink

    i think you quoted the wrong person, that said, generally you use pulling eye's. we pull on the shield, not the connecter, if the pipe is tight, you blow through 2 lines, one for the connectors and one attached to the sheath to do the actual pull, should never pull on the connectors.
  49. LittleBill21

    Starlink

    you need to determine how many connectors, 3/4 would be fine for a single pair.
  50. LittleBill21

    Hauling Sub-Compact.

    just remember to take the seat belt off before trying to jump
 
Top