Search results

Just an update on my plight. I had my starter rebuilt for about a $100 – money well spent in my minds eye . Won’t be able to install for a week or so but if the problem still exists it clearly is wiring and I will tackle that then. Wanted to share some info I came across that might be helpful in...

Can an existing starter be rebuilt from say 2.4kw to 4kw?

I have not removed the starter but believe it has 11 teeth on the starting gear and those from rare electric have 9

I'll order one up and then see if I can this original one to work as a spare. I miss the days of having a local auto electric shop near by

Good call. Thanks!

Thanks all... Can't believe Hoye charges $26 shipping on a small $50 part.....yikes!

Just want to make sure I am testing my troubles correctly. Was getting clicking at the starter but no start. Battery fully charged. Bridged the two terminals and can force it to start. Took a jumper from the positive terminal to the top post (wire from ignition) and no joy just clicking. Leads...

Oh...before I start measuring...anyone know top of mind what the bolt pattern measurements are for Yanmars?

Thank you all. Awhile back, I remember someone asking the same question I did and I thought I remebered the set could be worth a grand....ill post something around me (Connecticut) and see what comes of it

Inhave been holding on to these for almost a decade and I am thinking of selling. Can you guys give a fair range in price to sell the set?

For some crazy reason, the damn thing started charging again. The only thing that happened was I tried to get some readings from the two outputs. I did take a probe and accidently touched both and got a small spark and after that it started charging again. will call Hoye and talk to them...

Link to replacement at hoye for a better view of dynamo. https://www.hoyetractor.com/PROD/AL-1215.htm

Read this thread because I have a no charging situation on the YM 2020D. This alternator does not look like what you guys have. See picture. Hoye says its a dynamo. As I trouble shoot this, should I be getting DC volts out of the two wires from the alternator/Dynamo or AC? I checked today on DC...

I recently replaced a power steering hose. Started the tractor to check for leaks, let it run for a minute or two and then shut her down. Went to start her a week later and it spins over nicely, but no catching at all. Almost seemed like the compression release was open. I confirmed the comp...

I have been using a harbor freight separator with a filter in it. Its starting to leak. I rarely use my plasma cutter and mostly use some air tools and media blaster the most. Just looking for a decent home diy'er water separator that doesn't break the bank. Thanks in advance.

I started to get some rot through on my loader bucket. the previous owner left water in the bucket so I ended up with lots of pitting and its getting pretty thin is certain areas I spent some time this past weekend cutting out and welding back some good metal. And I can continue to patch it as...

Now what???

I replaced the right side brake boot awhile back because it leaked a bit. With the new boot it does the same. Is there a seal that is easy to get at to fix this? I can also live with the small leak, but wanted to ask if letting it go is going to cause some issue in the future???

I am posting this to see if the experts here have any ideas on where to look first. I normally would jump right into this and not ask questions until I got in over my head but my tractor is outside and the weather is just down right cold and getting colder so if I can save some troubleshooting...

Looking for suggestions for getting the codes off my Silverado. I need the air bag capable scanner. My head was spinning trying to find one. Anyone have one they recommend?

Not mine but near me....in case anyone needs an engine for cheap money. hartford.craigslist.org/grd/5801266407.html

Let me apologize for this long thread but hope it will help many of us Yanmar owners out there who have or are planning on installing Power Beyond or Power Steering or a combination of both. However we are looking for feedback from any members who understand this stuff better than we do. A...

This isn't pretty but I came across a set of led lights for little money and they fit in the area where the sealed beams are with no modifications. I tried to find a led lights that were roughly 4 x 6 but no luck. Of course they are brighter than the stock lights and use less amps by 50%...

In the recent months I have done lots of additions to the hydraulics to my YM 2020D. New Power Steering Kit from Hoye, replaced the loader valve with a Brand Hydraulics LV22, new pump and added some hose etc to make it work better. As some may recall, with the installation of power steering I...

I have had my Tractor for almost 6 years now and it came with R-1's. I wanted more stability and the R-1's tore up the lawn so I added the Hoye Turf tire kit. I kept the R1's all this time thinking there might be a need for me to swap them on, but that day has not come. Is it worth it to...

My BLB valve that came on with V-tek FEL took a dump today....literally. I posted over in Hydraulics, but have any of the Yanmar guys replaced their loader valve with a drop in replacement? My post in hydraulics : http://www.tractorbynet.com/forums/hydraulics/353214-yanmar-v-tek-loader-need.html

My Italian Made BLB loader valve bit the dust today that came with the V-tek Loader - you can see in the pictures number 2 where (no idea what its called) broke. This sucks but I wanted to get a valve with PB and float so all is not lost. I have no idea what a good replacement brand would be...

I inherited my dads Stihl 028 WB. It had little use because he bought it and then moved shortly thereafter and stopped burning wood. I cleaned it up and found a few gotcha's with it. The first was that it had no felling dogs and that this model did not have an inertia brake from the factory...

Anyone know what this is?

I have a LED traffic light (Red, Amber, and Green) and I wired it up. Problem is its very bright - if you walk in front of it and look at it you are somewhat blinded. These are sealed LED lights ( I am sure I could open them up if needed) and was wondering if there was a way to dim them a bit...

I had a job in the early 90s that received a lot of mail from around the mail. I just came across all of the stamps that I tucked in a drawer. This would be a good start for anyone interested in international stamps....I will send them along to anyone who has interest especially if it's a kid...

No dealers around me and I read that the combo with scope, rifle and bipod in .308 was a good set up. Anyone have one and care to share? Howa Targetmaster Package 20" Hvy BBL 308 Black Hogue Stock

Every year when it starts to get cold around here I start thinking about installing a block heater. The problem I have is the plug doesn't want to budge. What really makes it difficult is I dont have any tool that fits this square plug. Its obviously metric and I am sure its rusted into place...

Just wanted to document and share my experience with installing the Power Steering Kit I purchased through Hoye awhile back. My YM2020D is equipped with a V2 V-tek loader and a BRB loader Joystick valve with NO Power Beyond. The manual steering was adequate for most loader work, but at times...

I was hoping to write my install up and share with you all without asking the Yanmar guru well, but I am a little confused and the directions that come with the kits are not that clear. So...background first: 2020D Hoye Power Steering Kit - Yanmar Tractor Parts POWER STEERING KIT - NEW! V-Tek...

Looking for some ideas. My stock headlight grill is breaking itself apart. Has a few cracks in it and from the hood shaking when the engine running its starting to self destruct. So I made some calls and called Fredericks who told me that the version they had was a reproduction version made...

Its actually kind of funny and sad. Everyone talks about the temp of their tractor engine. This made me install a temp gauge and it rarely got above 140 degrees. I thought that since I installed a temp probe in the upper radiator hose that it just read low... So today - although cold...

Not mine - Yanmar Mounted Turf Tires

I have a 7 gallon hydraulic tank for my splitter and its sprung a leak at the welded in port. I know it can be welded, but my question is whats the proper procedure? Does the tank have to be empty and totally clean of ATF that is in there now?

Oh brother - I did one but I don't think its right. Wow...The old private party listing was so much better....unless I am missing something. In fact my new ad didn't even show up on the private party section under marketplace. too bad.

Trying to post an ad, but it seems I do not have permission to post? Its odd because I have posted in there before.: How do I post an ad? 1. Log in to TBN. If you do not have an account you need to register. 2. Visit the private party ads forum. 3. Click the post new thread button. 4. Fill...

Dropped off my Prince cylinder and I am being told its not repairable. Replacement is in the $450 range ....OUCH! its a 4 inch case with a 2 inch rod and 24 inch stroke. Its an odd ball cylinder in that it has a welded tee on the case end and a 1 1/8" hole drilled in the rod. I am also being...

I bought these springs that are the exact size as the rubber "cushions" that are on the seat bracket to help cushion my ride. Well, I cannot for the life of me see a way that is relatively easy to swap these in. If anyone wants them they can have them for the cost of shipping to your door.

Why and how long did the grill last before you had to replace parts. I am frustrated with the $250 grills that need $100 worth of parts every couple of years

This is a question for the hydraulics gurus. I have noticed on my loader that the curl is weaker than what the bucket lift can pick up. The best explanation I can give, is today I had the forks on my bucket and loaded it with 10 foot long small diameter long lengths. The loader had no problem...

We took advantage of a state pilot to have our well tested for Uranium - our results showed that we are over the EPA recommended levels and we are BIG water drinkers. Recommended solution is a Reverse Osmosis System (under sink mount) for drinking and water to cook with. I see lots of units...

I am considering swapping out my 40 gallon electric for a propane fired solution. Here is my situation: - Electric 40 gallon is 13 years old - no problems but thinking I should be proactive rather than reactive in case it fails. Takes 4500 watts to work and eliminating this for a propane...

California...I have enclosed a picture of my chains. How would a clevis pin fit into the equation?

Looking for a HD 3 pt boom pole in the Connecticut area.

I feel pretty stupid here and was hoping I can get lucky and have one of the brain trust here point me to the correct product. Here is my situation - I have a Valby chipper and I realized the pto shield is not working properly and I need to replace it. A new replacement shield for a La...

I have what I believe is a light that is the thermo start indicator light - mine does not work. I actually thought it was for illuminating the gear shift when the headlights were on. Can anyone tell me what it is actually for? And - if its the thermostart light - how does it work? In other...

My home built log splitter wedge ripped off tonight. The wedge was already welded onto the I Beam when I got it and it was a welded up mess of hand wedges and steel in a 4 way wedge - Who am I to criticize - it split at least 25 cords of wood for me. Well the top vertical section ripped off...

When I bought my 2020D I switched over to Loaded turfs with chains for all my needs. I kept my R-1 for "Just in case I need them" but there really has not been a time where I have. They are 6.00-14 in front and 9.5-24 in the rears. Any idea what a fair value is for them? I searched on...

I am seriously considering adding this very expensive option to my YM 2020. I am in need of shoulder surgery (putting it off as much as I can) and my tractor is not doing me any good when I am using the loader and using everything I have to turn the steering wheel. I have not spoken to Hoye...

I will be adding a 60 gallon 3HP single phase compressor to my garage and will be using the existing 220V outlet I had run (by an electrician) for me last year for a welder. The welder just plugs into the outlet when needed. I will be running a plug on the end of the compressor (will need...

I took a similiar approach with suit case weights so I could use them on my back blade and to add more weight to a box blade. I drilled and tapped the weights which allows it to slip on both attachments and lock them in place.

Hoping to cash in on the TBN brain trust. I bought an off set market umbrella for my deck - link below. I want to remove the stand and mount just the pole to the outside of the 4X4 that is part of the deck railing on my deck. This way the umbrella hangs over the deck and we do not have...

I have an Anderson dual axle 7K trailer with a square tube trailer jack that works ok when there is no load on it but when there is any weight it becomes a wrestling match for me. I am thinking of replacing it, but wanted to know if these wear out or if there are any serviceable parts to make...

So the recent thread on a stuck clutch got me thinking. I really want to make my clutch last for a LOOOOOOOng time to avoid splitting her in half. I thought I read on a thread once that a tractor clutch is different that a clutch in a car or truck. I know when I am working my tractor that I...

I have a home made splitter using an old Tecumseh HH100 engine - No problems at all except the charging portion quit a long time ago - No big deal I just jump start it with a battery. The only issue I have with this engine is that they do not make the ignition components any more so when it...

I was wondering....because I saw a hand crank on a JD 950 tractor I sold (flipped) that would really be a nice replacement to the screw type we have on the YM's. Unfortunately, the one on the 950 was too big for me to swap it out. Anyone know of one that will work? My screw type is a...

Guys - I have been grabbing data when I can and putting into a spreadsheet....I thought I would share and ask if there was a way, we can use this as a sticky under the Yanmar Forum and have someone host the file so that we as a collective group can add/delete to it as needed. I found a free...

Not to get into a huge discussion - but I do not know much about shotguns and would like to find a 12 gauge with a 18 inch barrel or so. I know finding one my be a problem, but I tend to do a lot of research and then buy. I am in no hurry so I want to get smart before I buy. this will not be...

We got quite the snow fall this weekend. I keep my tractor under a deck in the back of the house. I tried to drive the tractor after the storm, around the front to start plowing. I got about 5 feet. The tractor with chains and loaded tires wanted nothing to do with moving. There was just to...

A long time ago I was given a Fein Multimaster and all the folks I know who work in the trade love them...so I started using it and its is great...but the replacement cost of the blades are steep. Where are folks buying their replacements????

I have a 5 hp CH compressor with a 30 gallon tank that produces 6.3 CFM at 90psi. I don't use the compressor much, but when I do, I need it to provide CFM's that this can't do. Mostly impact wrench and sand blaster, but have some cut off saws and tools that need high amount of air. The...

Currently have a free standing Vermont Castings Vigilaint I bought used and has been great for us for the last 7 years. It is located in the basement and we burn about 5 face cords a year. We just added an addition and I think the stove needs to be rebuilt and its probably a little small now...

Not sure if this has been mentioned before about powder coating guns for home/shop use, but a couple of years ago I bought this kit from Eastwood to assist in the restoration of my 70 Jeepster Commando. For under a hundred bucks and a toaster oven, I have been able to powder coat quite a few...

I have a new to me weldmax 164i. I have played around with it a couple times but this weekend had to do a repair to the cuttung wedges on my logsplitter. I needed to cut some damaged steel and struggled to get the plasma cutter to cut through. I got a lot of popping - some slow and some...

Kind of sounds basic, but I am trying to remove the gear selecter knob so I can replace the gear boot. I put a pair of channel locks to unscrew the knob - but no luck. It is stuck on there...I am assuming the knob unscrews...but maybe its pressed on? I figured some light heat and some pb...

I was doing some maintenance on my 2020 - oil and filter, hydraulic filter an fluid change, fuel filter - when I noticed the boot to my brakes is seeping. What is behind here and is the boot just for protection? Just wanted to know before I called Hoye. Also - looks like there is a drain...

First - everything is working just fine! But its time to change the fluid in my splitter. I am using a 10 HP Tecumseh HH100 engine to turn a Haldex 2 stage pump . When I first built it I could not find any documentation on what fluid to run in it and so I used Dextron 3 ATF. A quick google...

Well....with Hurrican Sandy we are on our generator going on day 5. I am looking for a way to be notified when the commercial power is turned back on. Pretty much all of my neighbors are running generators so we really have no way of knowing when the power comes back on. I saw this device...

Hoping the TBN communicty can help me out...we are still without power but running on the generator....and racking up the hours on it. I did an oil change last night but have to do another in a few days - Generac oil filter on the generator is a Guardian Part #: 070185B - OIL FILTER BLACK 75...

I am getting tired of using ply wood up against a tree. What do you use? I mostly shoot a 22 so please keep that in mind with your suggestions. I see cabellas has something simple for about $50 bucks: Cabela's: Do-All Bullet Box Appreciate your ideas.

I have a 16 foot trailer and from time to time I put my jeep or my tractor on it. Currently I use rachet straps on all 4 corners - something like 14400 pounds per strap if I remember correctly...but a while back I learned a lesson and had one of the straps rub on a bush hog and almosty went...

I have been doing a bit of prep work identifying what each breaker in my panel controls in the house - After 40 years and a couple of additions, it was a great project to undertake and identified some interesting things which I needed to know and would have never guessed otherwise). Now I have...

I have heard a couple folks recommend the Sikkens deck seal. this if for a new deck installed a few months ago. What do you guys suggest....want to use a translucent sealer....

I was always taught to call my parents friends and adults by Mr or Mrs or of course Sir/Maam....But, I have children under 13 and MANY adults insist my kids call them by their first name....and I am in the minority. I tell the kids to call adults by their surname until an adult tells them...

I have been doing some reading and following posts... but there is so much opinion out there.....I realize that fuels have changed since my YM2020 was built and its now ultra low sulphur etc. But what I just really want an answer to is.... Do I need to add anything to the on road diesel fuel...

Its a pretty common occurence with me....working in mucky areas of my property....This area was 2 month old spoils from my pond.....it had a lot of clay and just had not dried out enough. picture makes it look worse that it actually was...but...luckily I backed out of it with the help of the...

My truck stays outside all year long and my tonneau cover is about 4 years old. From time to time I put on some armor all....but have heard that might not be the best to use. What have you used that helps protect and lengthen life of the cover?

So...I was thinking.....Can I winch over a tree to 1. pull it down and 2. help assist in removing the roots? I am thinking about ~18 inch diamter trees I have winched trees over that I have cut wedges out of and of course left the stumps, but I was wondering if I just used my 8K winch...

So I have a new deck and its a good spot for my tractor until I build a shed. Is there an easy and good way to shed the water away. I know I can cover the tractor with a tarp, but with my exhaust sticking straight up its a pain. Here is a picture of under the deck with beam.

I usually cover my wood piles with any ole tarp - blue, green, silver....what ever I have around. Its getting to be an eye sore for my neighbor and I was wondering - if anyone knows of a good strong tarp material that is black (which looks better in my opinion than the multi color solution I...

I picked up a used Valby CH150 chipper and it calls for Shell Alvania R3 (or Kendall L427) grease for the bearings. I spoke to someone who said any high speed low temp grease would do....My question for those who know...is that true and if not where would I find the Shell Alvania or an equivalent?

So...I am the proud new owner of a used Valby CH-150 chipper. Need to find an owners manual - but my web research says this will chip upto a 6 inch log behind 25HP PTO at 540. I have 20 HP at the PTO....so I am wondering does anyone have a Valby and run it at a faster pto speed? My Hoye...

We are having a new addition put on and I get the bottom half - meaning about 300 sq feet of basement space. The walls are stick framed and insulated with a foil like paper over the insulation. I plan on using old kitchen cabinets as a bench and for storage. I like to have my tools and items...

This has been a problem for quite some time - and I am very surprised it has not been worked out by TBN. So I am just wondering if you folks in the Yanmar section are getting your thread updates via email? If not, I think its only fair that the Advertisers know that users are not being driven...

So....I got this diamond in the rough John Deere 950. It has only 460 original hours on it....Axel seals were shot and lots of rust from sitting outside over the last few years. Got everything working again - the FEL works although it needs a joystick contoller to replace the original two...

I have a JD 506 - 5 foot bush hog for sale in the local Craiglslist...I am asking $600 with hardly a bite. Is this a fair price or just not good timing for a old 5 footer?

I use a Parts cleaner solution I bought at the Parts store (mineral spirits)...and its ok but I am wondering....What works for you? Diesel?

Any easy way to paint the rims? I have masked off tires before but it takes a ton of tape and I still get some overspary out of a rattle can. what have others done?

I was trailering this past weekend and my tekonsha would blink red everytime I hit a bump and tell me the trailer was disconnected. I noticed that because of the stiff cable from the trailer that it torques itself into the female socket on the truck and makes it loose. Anyone have a fix?

I removed the left brake shoes behind the brake housing on the JD950 (Yanmar 2500/3000?) and it was full of oil. I have not checked the right side but my guess is that the axel oil seal failed on both. Anyone change these out? Hard? Easy? Also - can the brake shoes be salvaged? they looks...

I just picked up a 950 and think there is a brake and hydraulic leak issue. Any chance this tractor has the same set up as one of our Yanmars?

I just picked up a 950 that was well maintained for its first 25 years and really sat outside for the last 5 with the 2nd owner. 2nd owner told me that it doesn't have any brakes and although I have yet to try to adjust them, he told me he went in to the brake housing and he said there was...

Can you folks let me know what a 2wd 950 is worth with about 500 hours...no rops and some engine compartment sheet metal rust. Oh and it has a johnson fel.

What is the correct way to engage both rear wheels when you have lost traction?

On my 2020 I have a reserve coolant bottle with a low and high level. When its at the low level the coolant light lights... I keep it right at the low mark but every one in a while I have to add some coolant - I see no leaks anywhere and the oil looks good. Any chance these systems "use"...

New England Antique Tractor and Engine Shows 2012

I recently broke one of the cylinder curl/tilt rods on my VTek Loader and when I replaced it, I installed a temporary pressure guage so I could measure the system pressure. I have always felt that the curl strength was weak on this loader. Here is what I did to test the pressures: I cycled...

I was digging with my FEL with toothbar and the tractor lurched backwards and over exteneded the curl buckets and with a loud bang I lost power to the curl. The loader lifts and I can manually curl the bucket. So..what damage did I do, seems like I did it to both cylnders and do I replace or...

I used my back blade for the first time yesterday...worked really well. We are getting some melting today and I see that it scratched up the asphalt some. Is there a technique to avoide this? I read some folks add an ABS pipe to the cutting blade. What has worked for you folks?

Any pros and cons?

I was wondering if we happen to have any members from Japan or who speak Japanese that might lend me a hand? I am looking for a original Service Manual for my Japanese made Yanmar YM2020D. I was hoping to find a dealer in Japan or some other source to buy one and have it shipped to me in the US.

I have a Yanmar 2020D with the V2 Loader. All works fine but am I (new to this) experiencing some weakness in the system around the bucket curl. I have been using my box blade to scrape up material and then using the loader to pick up the dirt. When digging, picking up material, or trying to...

Anyone have any of the spec's for this loader....I mean ANYTHING????

I saw this tooth bar at least $50 bucks cheaper than the WD Long - Anyone order from these guys? Bobcat Skid Steer Loader Tractor Bucket Teeth Tooth Bar | eBay

I live in the land of New England - home of free rock... I am always trying to remove some 100-300 pound rock that makes its way to surface....I am still learning to use my FEL but am wondering if a tooth bar is the way to go. Haveing difficulty getting the bucket edge under the rock to pop...

The draw bar that came with the Yanmars (which I do not have) that mounts low and is centered between the rear tires and a draw bar that attaches from one end of the lift arms to the other sideways?

Just wanted to start a thread with info I have collected to make sure its accurate and see if we can add to it. Seems someone (including me) is always looking for a BH for their Yanmar. I have the following models that have worked on the various Yanmars. Please chime if the info is incomplete...

In case you are looking for any of the above - here is my ad: Sears SS12 tractors, Parts amd implements - TractorByNet.com

I have a Vermont Castings - Defiant from the 1980's that is attached in my basement to a masonry flue - its about 28 foot run to the outside. What temperature should I be running it at? I burn only northeast hardwoods - maple, oak, hickory etc. Is 450-500 to low or just right?

When reading a post in a forum thread, the images of that thread are arranged along the top of the mobile device (nice feature). These images are clickable so that you can enlarge the thumbnails. However, on multiple device I have, some images enlarge while others do not no matter how much...

I am looking for a used pto driven chipper for clean up around the house. My PTO HP is 20....I have a budget of about $1500 but I saw these Jinma 6 and 8" versions on ebay for under $1800 with delivery. I burn everything over 3+ inches so I am wondering if folks are happy with this chinese...

Looking for 200#'s or so of weights to fit on my box blade in the CT area.

Need some guidance here...I have used concrete before but really only for mail box posts, flag poles and mortar jobs. I want to build a rectangular concrete block with hooks that will attach to the back edge of the box blade and on my back blade - I think 200+ pounds would be good to add some...

this is my first winter with my 2020D. I am holding off on the block heater for now....the previous onwer said he had no trouble starting her in sub freezing temperatures. My real question is - when I flushed the coolant this sumemr I put a 50/50 mix in.....with that mix I never see 160...

I don't burn a lot of diesel - but I have to admit, its alway a challenge for me to find any diesel - and I was wondering how can I find a source of off road diesel - might actually be more convenience for me and save me a few bucks. Google comes up with nothing.....do I just go to a heating...

I am looking for a PTO chipper - probably used. What brands would you folks recommend? Any gotcha's you have expereinced? Plus - is this something you guys get a lot of use out of???

When I bought my tractor, the owner gave me some spare parts. This air filter was included but it was the wrong size. The correct one for my tractor is on the left. There are no numbers on the filter. If anyone wants it, just pay shipping and its yours

Looking for ingenious and or not so ingenuis ways to store about 25 foot of chain on the tractor. I have a small tool box on the fender that I use for a hammer etc. but cannot figure a good safe place for the chain....any ideas? Pictures?

Folks, I was thinking of getting a used 48 inch box blade to help with some leveling and also for scraping to get some fresh top soil from the floor of my woods. There is someone local to me selling the above for $250 used but in excellent condition. Is the KK 48 inch a good version -...

I have a 15 amp dynamo so adding four 55W halogens is out of the question. I am going to strap some LED lights to the front and back of the ROPS. I know they do not melt snow for my night time snow removal use, but I should have no problem with wiping them from time to time as needed. I see...

Anyone have a 3pt heavy duty (1000 lbs plus) hay fork located in the northeast???.

I want to start building a retaining wall...we have no shortage of good size boulders here in CT. The retaining wall will be on the downslope of a 45 degree hill..or up slope depending how you look at it :laughing::laughing: Some of these rocks won't fit into the bucket and I am not sure my...

I have the 2020D....is this similair to the other 20XX tractors?

I am still gathering the parts to add gauges to my 2020D. I want to add a temp gauge while keeping the stock temp warning light. The idea was to cut into the top radiator hose and install an adaptor that will allow the temp probe but I cannot find one that will work. Like this: Radiator hose...

I can get a 4 link chain for my tires for about $150 delivered. I can also find the 2 link chains for $325. Is there a big difference between 2 and 4 link? I would rather spend the money rather than waste it on a 4 link and later having to buy the 2 link. My application is snow using a back...

I can get a 4 link chain for my tires for about $150 delivered. I can also find the 2 link chains for $325. Is there a big difference between 2 and 4 link? I would rather spend the money rather than waste it on a 4 link and later having to buy the 2 link. My application is snow and and in...

Not mine...but a bargain I would think: Tractor Tires and Rims

Does anyone recognize this back hoe? I am wondering if it will fit my 2020D

I am thinking of removing my horn button and replacing with a toggle switch that will power added roll bar lights and a back facing utility light. I need the toggle swtich to have off, on (front facing lights), on (back light) and both (both front and backup). The usual googling for a 4...

I have ordered up a set of turf tires for my 2020D with FEL. I have a pretty significant hilly portion on my property and will also be using my tractor on the lawn and plowing snow in the winter with a back blade. I plan on getting chains for the rear tires. Would appreciate thoughts about...

I remember reading in the operation manual not to ballast turf tires. Is that really true? Does that mean loading the tires or adding ballast to the 3pt? And if so....why isn't it a good idea?

Folks... I have a very steep hill on my property - at some points is almost 45 degrees. What I was trying to do this weekend was angle my back blade using the lift arm adjustment and back into the side of the hill to pull material forward and build a path that is more horizontal so I can...

Anyone know where I can find some 6 bolt rims and turf tires for my Yanmar in 25 X 8.5 X 14 (fronts) and 13.6 X 16 (Rears)

Does anyone know what the new width of their tractor is with the Turf Tire kit from Hoye? the spec's say that my 2020D is 48 inches wide and I have a narrow stall where I house my tractor....Want to make sure I can still use the stall with turf tires. Thanks

I was just wondering how long it should take to drill a hole in 1/4". I have some harbor freight silver and deming metal bits. To cut 3/4" hole on my drill press at 300 rpm's it took about ten or more minutes each hole. Is that about right?

Need some info folks. I want to run some additional lights on my YM 2020D and need more than the 15 amps or so the dynamo provides. Can I direct swap the dynamo for the 1972 Datsun 510 alternator? This Dynamo has a real small foot print and I am wondering if I am out of luck. Couple of...

I need to fill the front axle after replacing a leaky seal and it calls for 90 wt. All I can find is 80W/90. Are these one and the same?

3pt Ballast Ideas and Amount on YM202D? I was thinking about how to ballast the back of my 2020D. Besides adding rim guard to the tires I was thinking of taking a 55 gallon drum and putting a 7/8 inch bar horizontally to attach to the the 3pt. How much weight in cement bags should I be...

I ordered my ROPS for the 2020D. Of course I was thinking of installing lights...but I believe I remember hearing that the alternator can only support 15 amps. If I install three 55 watt lights - 2 facing front and one rear thats 15 amps right there. Has anyone used a LED spot light so as to...

I need to move some trailers from time to time around my property. Some accept a 1 7/8 or a 2" in ball and one has a pintle hook. So I deally I would like to use a receiver tube set up allowing me to swap out different hitch set ups. What have others done? Can you include pictures?

Well....I am the proud new owner of a YM2020D. I ran it a bit today on my grass and the AG tires tore it to shreds. Of course it didn't help that at one point I had the parking brake set and dug myself a hole in reverse:laughing::laughing::laughing: So....I have 9.5-24 on the rear and 6-14 on...

Looking for some pro's and con's to help me make up my mind here. I had decided that I would not buy a VN refurbed tractor.....but.... In my area a 2020D came up. It is an officer in the military who bought it from TX in 2007. Has used it to snow plow and brush hog. Estimates he put on 150...

I couldn't find a ROPS over at Hoye's. Anyone know if there is a OSHA approved ROPS for the above tractors?

I recived an email today that Eastwood has their own plasma cutter coming out. Anyone know if this is a good machine or who makes it for them? Its selling for $640 - I like the idea of a 110/240 machine. Severs up to 3/8"

Anyone have an idea of the value of a Kubota L345 4X4 with loader and ~1700 hours?

Folks, I am looking for a used Yanmar with 4wd. Also looking to put a bucket on it. A few come up from time to time in the Northeast but it痴 difficult to find an original owner that can verify hours etc. I do not mind a high hour machine (I figure I may put on 50 hours per year) if I can...

Folks - I didn't know where to post this but - I do not receive any instanst emails on responses to threads that I am subscribed to as well as private messages even though I have it selected in my profile. What am i doing wrong?

I am going to look at a 240D with high hours. I have been reading up on other posts for info and have a few questions. Is there anything particular to look for in this model? Does this model have a water pump? does it have a hundred or thousand hour meter - and is it true the hour meter...

I have the ability to purchase from a Kubota dealer a BX24 (LA243 loader & BT600 backhoe) that has the updated plastic and between a BX23 (LA210 loader and BT600 BH). Both tractors are under 100 hours and in very good condition. Price is about a $1000 difference. This will be my first tractor...

I have the ability to purchase from a Kubota dealer a BX24 (LA243 loader & BT600 backhoe) that has the updated plastic and between a BX23 (LA210 loader and BT600 BH). Both tractors are under 100 hours and in very good condition. Price is about a $1000 difference. This will be my first tractor...