Search results

I feel sick because I don't do what you guys do, I run my Yt235 like my John Deere 855. Only run my rpms high when using the pto. Example, few days ago filed pot holes on our road tractor idled for 2 or 3 hours I then started shutting it off. Next day finished with few more buckets and then...

The picture of information on my post was given to one of the branches of Emrich Sales and Service. Charlton and South Glens Falls were sold to Salem Farm Supply so the Emrichs in Melrose, NY is the only Yanmar around our area that I know of. Anyway parts people are tracking this for me with...

My good friend has a Bobcat gasoline sise by side. He did a cab and doors nice and tight but was having cold engine issues with that 20 Honda twin. He bought the 8000 btu diesel heater mounted it put a dirverter on the output heat to split it 1. Went into cab and 2. Went under unit to go into...

I have a couple shafts with the implement side has the slide on yoke with a soft bolt that's tightened up, I don't remember the Allen head bolt at all on either one.

I used a 12" auger on my John Deere 855 drilling 4 foot holes for a 6' vinyl fence, I did three holes and had to quit and use backhoe. I can't believe I didn't ruin the filings on the auger drill pulling out huge rocks.

Hello gang, I bought an older commander Cyclone Rake with the smaller bag size 285 gallons about 2 summers ago from an elderly man (93) 3 miles from my house ($600). Put just a zinger ad on Facebook just asking if anyone out there getting rid of their cyclone rake. Tried marketplace turned out...

Okay, I hit send before I realized I wasn't done with that last post. More info. OK this is called a Warranty Update. Top of Form YT235TLB and B75 Backhoe Kit Lift Link and Safety Label Update-Mandatory Issue No. U-DD17-00158 Product Category Tractor Revision history New Administration Number...

An aside to that I noticed one of my lower 3 Pt arms was missing the square turn buckle. The left arm, drove to South Glens Falls to Emrick Sales and Service. They had them in stock, but they had the original smaller ones, the ones I need are longer the squared part is like almost 2 inches...

I have an oops to report, 3 month ago I decided to take backhoe off, needed some york rake work. Was able to use vice grip to grab pin end and gently tapped on vice grip to move pin out, worked relatively well. After the work dropped attachment and proceeded to investigate pin problem. Removed...

First time reporting this issue dealership in South Glens Falls did a measurement of the pump pressure, it was low, put it to maximum specs. For quite awhile it seemed fine, my tractor is a 2017 with 200 hours. This past summer we bought 29 wooden sections of six foot high fence on sale. Didn't...

This past week was a working vacation, some heavy work some light. Took off my backhoe off of my Yt235, and having trouble with the right hand arm pin that connects 3 point hitch to tractor, it's so tight I can barely push it in and out. And of course you can only use the tips of your fingers to...

When we bought our 235 they offered 48 zero percent so we took the deal back in 2017.

I till my two neighbors gardens with my 235 and a 5 foot tractor-supply tiller I bought used. The one up above is Harry's about 30 x 25 and Daryls is 20 feet by 60 to 70 long twice a year each. Dont seem to have any problems, my old neighbor (pasted on)has an old 4 foot Woods tiller with a small...

I love my 235, but I have open cockpit no cab, I'm the one on route 22 end of road dressed like a mummy in winter.

I have a question for you guys and gals, on bucket I want to add chain hooks just like my old JD855, but would you recommend putting flat plate down first and then welding on hook? Or hook directly welded to bucket. On my JD855 to top of the bucket had a folded end on top and I added 3/8" angle...

Well after a few years I still love this tractor, yesterday evening waiting for young people to show up and help load 52 chairs and 8 round tables. It's 3pm 4pm, looking up road nobody, little did I know my wife was inside texting and talking to the helping Crew . (Family) Son of a gun where is...

Thought I would speak of some updates on the Doolittle trailer. New wheels and tires, and at Viking for small welding job plus straightening of fender mount. New axles and suspension, only thing left to do is replace wooden floor and POR the new fenders and mount and check wiring for some issues.

My good friend has a ck20 hes experiencing an oil condition in the radiator and overflow bottle. Theres no water in the engine oil, just a slimy skin inside of the rad and tank. Checked the rad with it running and no pressure noted or overflow out of rad filling spout with cap off. Scott read...

Well been dealing with this 36" plus of snow mother nature dropped on us. My 3/4 ton chevy couldnt push that much snow. Road was only one car wide, so mounted 60" snowblower used for 2 or 3 hours on road opening her up. Was using machine with the passengers side towards the snow with PTO round...

Trailering my yt235 loader backhoe. Tractor 2582lbs, backhoe 842, does anybody know how much the YL310 loader weighs by itself? I'm guessing same as backhoe or maybe 1000lbs Had a gem of a day yesterday reason for this posted question. Helping future son in law by volunteering to dig electric...

Hello everyone, have another question, I ran into a problem last summer using my 72" 3ph mower. I bought this tractor with the Woods BH75 backhoe, including frame mount. Now, onto the problem, when I hook up to an implement. The bottom 3ph arms are pinned on and I can't have the sway links...

Good looking building, but your right, theres never enough room, I use the wall tops to mount hooks to hang equipment that is not used regularly. We have an old pole barn 34' x 27' that has the death lean back and to the right, concrete never had any rerod in it, so we have huge broken chunks...

Been reading alot about guys using small atv winch to rotate chute, I have both sitting in tin can waiting for my garage to get finished. Nothing like changing seasonal tires in front of my new garage. Ugh..

My YT235 is still at the South Glens Falls dealership, checked in with them about an o-ring on the connection to backhoe, 90° connection leaking. Waiting for that to be ordered, not any progress on the loader only able to lift 710lbs. Discouragement is starting to set in. The Yanmar...

Few weeks ago my 4 wheel drive dropped out on my brand new YT235 with only 16 hours. Luckily, the shop where I bought it offers free pick up and delivery for the first year, well after almost 2 weeks they said the retainer clip on the front drive shaft under the protective plastic cover was...

Some background on the purchase, tractor, 130 loader and BH75. Originally, speced out unit with 60" deck, after some troubles from the dealership as to whether it needed a specific hydro unit to pickup the mower deck, ordered and quoted wrong one, many calls to manufacture to find out once and...

12' X 6' N & N from Quebec 10,000lbs gross galvinized

First is finally picture fixed, the old 03 Chevy 2500HD

From the little thumbnail it looks upside down

Yesterday my wife and I decided to go get some maybe two loads of topsoil if time permits. Earlier this summer I purchased a 12' x 6' N & N galvinized dump trailer, mostly for keeping up our private road. Debbie was tied up doing her mom's laundry so I took off for the other side of Greenwich...

started doing this last summer, changed out the fuel filter seemed to fix the problem. once cold weather started my tractor started stalling again, took off the filter and lines, from electric pump to filter housing fuel was running out fine, took off anyway and blew out with compressed air just...