Search results

I have been using Everything Attachments back blade with their gage wheel kit to straighten out my bumpy gravel road, it works excellent especially considering it was the first time I have ever used a back blade. All I had to do was set the angled blade down and tension the gage wheel...

When I was delivering freight years ago, a 5 gal bucket of highway striping paint spilled over in my trailer and got it on my hand truck. 40 years later I still have that same yellow paint on it.

I heated up the spring beside the safety switch on my B2601. It was a long time ago and don't remember how hot but guessing around 600 degrees with a heat gun, not enough to discolor the spring, but so that the switch wouldn't kill the engine until I left the seat.

Looks like I was wrong and a lousy memory to boot.

Believe it or not I installed my control valves without removing the tire or fender on my B2601 about ten years ago. I think I posted on it back then.

I use my B2601 for woods work and also for cutting roadside brush with a small swingout flail mower and it seems up to the task. I did have to add 2 1/2" spacers to the rear wheels with vegetable oil filled tires though.

I switched out my old rear control valve in favor of the Kubota OEM valves mainly because I needed float on one of the valves for my flail ditch mower. Here are (hopefully) pictures of the old system and I will follow up with pictures and some instructions on the new OEM valves.

The temperature needle on my B2601 only goes about a quarter of the way up in the summer and stays down in the cold marked area in the winter. Can anyone of you B2601 owners tell me what temperatures your gauge is reading?

Flail mower picture test.

Ok, here is a test picture.

I went down to the Kubota dealer last Monday, thinking I was going to buy a BX25D but looked at a B2301 and decided to go that route instead and ordered a B2601, while we were doing the paperwork, two B2601s showed up on their stock order truck. So anyway it got delivered yesterday with the 54...

Does anyone know if Harbor Freight's 3500# winch will bolt up inside the front bumper? They are on sale for $89.00 with coupon.

HI;I am having problems trying to start my redmax g3100t chainsaw.I was told its probably the carburator diaphram... anyway does the whole plastic housing have to come off to get to the carburator? thanks

Hi; my name is larry;I live in wa st next to mt rainier I have a farmall mod h tractor a yanmar excavator and a kubota rtv to play with.so this looks like the place to be. the posts I have read so far are really great.I will try to contribute what little I know. thanks much.