Search results

That was my first thoughts too, first thing I tried when this started, but didnt do anything

I found a old post from someone else that had the same problem and they mentioned running a ground from the starter relay on a different model kioti that fixed the problem. I was able to find which relay was the starter one, ran a wire from the battery neg. terminal to one of the ground...

Its not, it has a cab

Well it happened again today, would not start. So I cleaned up all the connections at the battery and the starter, and tightened everything really good. Tractor still would not start. I tried another 10x, nothing, I can still hear a relay click from under the hood when I turn the key to start...

It has the powertrain warranty but bumper to bumper was out in november. I personally dont see how this is not powertrain related since it wouldn't start, but apparently it is not.

I must have tried about 30-40 times yesterday and it never started, so I would guess probably not? But thanks for mentioning!

Thanks, I'll try that!

Hello, we have a 2021 NX5510 with 50 hours on it, I used it 2 days ago, everything was fine, started right up, etc. I go to use it yesterday, and it will not start. Its in neutral, brake is fully depressed, PTO is off, Im sitting in the seat, Battery is not dead, I hook it up to some jumper...

I'm getting the feeling I will need a box blade and a land plane if I have stone up to 3" or so. Or at least both would be ideal if I could swing it?

Some of the rocks are about 3" long, its definitely a mix

Thanks, will a land plane accomplish the same thing? I'm attracted to the land plane for what seems to be its ability to bring up stones and smooth them out as you go. Ive watched some youtube videos where it appears to restore gravel driveways pretty nicely (and easily, which is a plus for a...

Im in NY, but thank you for the generous and kind offer :)

Thanks for the replies everyone. Definitely some mixed opinions but I appreciate it...I would rather have a good handle on if this is possible or not. I do not have a land plane or box blade yet but I have priced out a 7ft land plane with scarifiers. Its not cheap but if this will work its well...

Hello, Looking for some advice here. On our property we have a few buildings and a gravel parking lot / driveway. Over the years it has gotten more muddy / soily and the top layer is alot of gravel fines now. Over the years it has gotten worse to where there is alot more grass then there used to...

Wow, that seems pretty good to me. I'd be pretty happy with those results.

I've seen the HLA ones that do cover the entire top. I did like the idea of having more of the top covered vs just a bar going across the top, as some of the snow I need to back drag can be pretty tall. But having the top enclosed seems like it will limit you in other ways then. That is a great...

Nice set up!! I have been thinking a 96" snow bucket might be to big? I seen a picture of one on a 4x4 pallet and it looks gigantic in comparison to the pallet. But to fall in line with what you mentioned about the width of the tractor, I just looked it up and I believe it is 65" wide but with...

I hear ya, thought about that also. I'm mostly on all gravel. Thought about edge tamers but then there goes some of the back dragging. Yep working on more ballast too. Looking into a box blade soon (we need one anyways) or a ballast box, tires will be filled but seems like that may not always...

If I went snow bucket, does anyone have any thoughts as to size of snow bucket for my model? Was thinking of 96" or 84"? Not sure how big is "too big" though.

Haha yep same here. How big is your pusher? I'm a little lost on what width / height would be appropriate. Nice, once it fills up does it push snow ahead of it pretty good still?

Yes along some of them, but not everywhere

Looking for anyone's input on using one of these for snow. I did some searching and found some posts, but looking for some more feedback. I've been debating between a 7-8' pusher or a 8' or so snow bucket myself, it would be great to hear some experience with these. (The main reason I'm...

Thats cool, do you get pretty serious snow there, say like 12" or 16" at a time? Do you run ballast or have the rears loaded? Are you pushing or blowing? It's interesting how mixed everyone's opinions and experiences can be with the same tires ya know?

Have you grooved your r4's? Sounds like it's a nice difference. That's a great idea to put the front chains on

Well, I could probably swap. Its going to be at least a couple weeks before its all here and set. But I hear what your saying, thanks for that. Just wish there was more long term info out there. I seen a smaller set of r14's at the dealer. Nice looking tires. I see how they should be better in...

NY and elevation is high enough to get more snow than normal. FWIW, Driveway and lots are gravel. Right now the lots are in need of more gravel so can get loose/ a bit muddy in spots. I also have been plowing 2 strips of our yard to get to the barns from the house, so thats just grass under.

Now my next topic of "over debate"...I was going to get R4's and groove them. Sounds like they suck in the snow if you dont. (And if anyone didnt read all the posts, we get ALOT of snow here). But I seen you can get R14's now and I have read good things about them in the snow. So I went with the...

I hear what you are saying, and I personally thought the NX4510 would be fine. For what the plans are in the foreseeable future, 45 hp seems fine. It was always going to be a NX because of the slightly better loader. But I have also asked everyone I know, including my other half, and here, and...

If you have them, how are the R14's are in the snow, and how are they holding up in general? Any complaints in general? I was going to go R4 and groove them but seen R14 was a option and went with them instead, now Im wondering if that was a good call (and I could probably change back still) I...

Right now I dont have any specific tasks that I dont already have a plan for. But sometimes you will find uses for what you own or have the ability to operate. It was more of a curiosity / education thing....I take it there is that many huh?

I agree but for some reason they dont seem to share the TQ figures. Someone on another thread did post what appeared to be dyno sheets between the NX4510 and NX6010 and there was considerable TQ gains between the 2.

I feel you, shopping for anything kinda sucks now. I did drive a similar size one. I watched as many videos as I could find on the NX as its kinda the best I can do right now. Id like to think there is some type of benefit there. On paper it says the max flow rates are the same between the 2...

Thank you! Thanks, I think thats what we are going to go with. I hear ya, a front mount blower is off the table as I dont want to be removing and attaching the loader everytime I have pallets coming in or out. And thats a good point about inflation, with how things have been going that may...

haha thanks! Seems like something that should exist somewhere. And if it doesnt we should make it and sticky it here. I cant be the only newb who would find this useful lol

I drove 2, neither were Kioti though. What are you supposed to do ya know? Wait till all this supply chain stuff is over? It may not be for a long time.

If it is true, the problem may be finding the software and method to reflash the pcm or a dealer who will do it if they even have the ability. Plus, I would assume if you did that, there goes your warranty, just like on a car or truck now....although... how would they know? Cars and trucks have...

Stock in general around here is very sad. Most of this is order only. Funny side note, the massey dealer wouldnt even let me drive one.

Being new to the tractor world, is there a list of ALL of the PTO driven equipment you can run on a tractor? Or a list of ALL of the 3 point attachments you can use on a tractor? No matter how weird, common, big, small or expensive? I googled and only came up with basic top 10 lists. I'd love...

That's why I wondered, do I even need that extra power? Right now, I want to get a snow pusher on the front maybe 7' or so and go from there. (I have been plowing with a POS plow truck with a 7ft straight snowdogg for the past few years and it works ok, but the truck is literally falling apart...

Once again, thanks to all for all the great insight here! In reply to some of the posts and to clarify the differences between these 2 models The NX5510 has over the NX4510, 10 more HP, Wider rear tires (R4's are 14.9-24 vs. 17.5-24), Cat 1 vs. Cat 1&2 3 pt hitch, weighs 210 lbs more, 2 mph...

Thanks everyone for the replies! Some great insight here. Being our first tractor, its tough to see or say what we'll be using it for in the future. But for right now its main use will be moving snow (and we get alot of it here) and loader work. Its over a 5k price difference between the...

Hi all, I wont lie, I am totally new to the tractor world. Very familiar with cars and trucks, not so much on tractors. But, I have been reading articles, posts, and watching videos like crazy for the past 2 months learning what I can as we shop tractors. Lets take the Kioti NX4510 and NX5510...