Search results

I disagree. Loader adds a lot length on a trailer or anywhere else. LOL! Back of rear tire to front of bucket 158”. Back or rear tire to front bumper (loader bumper) 111”. Please note I’m not measuring 3 point hitch because I don’t have installed.

Here’s a pic of my tractor on my 18’ equipment trailer. You can see how much the backhoe sticks past rear wheels. You can rotate backhoe so that it’s a lot shorter.

Hello, Considering buying a new Toyota 4Runner. What is everyone’s opinion on undercoating? Vehicle will driven in some salt during the winters. I’m interested in some sort of DIY product. Maybe Fluid Film? I would like to spray the new vehicle as well as my older truck, etc. Any...

Hello, Considering buying a new Toyota 4Runner. What is everyone’s opinion on undercoating? Vehicle will driven in some salt during the winters. I’m interested in some sort of DIY product. Maybe Fluid Film? I would like to spray the new vehicle as well as my older truck, etc. Any...

Hello, Just posted video of my home made garden hiller (bedder or row builder). It's an attachment I can bolt onto my single row cultivator. Works pretty well! The old Ford Golden Jubilee pulls it easily. This video was shot in June 2018. I've been a little slow getting videos up...

Hey that tractor looks familiar!!! LOL!!! My grapple is still working great. That heat pump didn't even scratch it! LOL! Thanks for sharing my videos. Here's a pic of my L3301 in it's natural habitat.

Thought everyone might enjoy video I made moving some dirt with my L3301 and front loader. I’m really enjoying the HST for loader work. I don’t like the pump whine but HST beats having to use clutch all the time. This tractor has the Piranha tooth bar on it from BXPanded. Hot knife...

Thought you all would enjoy a video of moving dirt with my Ford Golden Jubilee and MUTS trailer. I loaded the dirt with a L3301 TLB. Was pretty fun work. Also in the video is quick demo of sifting unburned logs out of the dirt with my wicked grapple. Really is handy! Basically a giant...

I took this video a couple days ago at the American Truck Historical Society National show. Cummins had a display at the show and were running this engine occasionally. A real piece of history! Thought you all may enjoy! Starting Oldest Known Cummins Engine! 99 Year Old Engine at ATHS 2018...

Have a new video up. Digging bushes out of my woods and the wicked grapple proves very useful for moving the brush piles out! So far I really like my new grapple! Would love to try one of the small grapple rakes sometime! Ultimate Bush Grabber! Kubota L3301 with Wicked Grapple and Backhoe -...

Thought I would share my 3 point log skidding hitch video. It’s really handy for moving logs around my property. If you have any questions just let me know. Tractor Log Skidder! #6 Implement You Need; Skidding Hitch - YouTube

Hello, here’s a video featuring my 3 point log skidding hitch. Works great for moving logs around with my L3830 Kubota. Tractor Log Skidder! #6 Implement You Need; Skidding Hitch - YouTube

Here’s my unboxing and initial review of the Wicked Grapple! It’s a pretty nice unit!! Let me know if you have any questions. \\youtu.be/f2k2HNXmVBE

The WICKED Root & Debris GRAPPLE!!!!!!! Here’s my unboxing and initial review of the Wicked 54” single lid grapple. So far I really like it!! It’s mounted on a L3301 Tractor Teeth!; Unbox, Install and Talk on Everything Attachments Wicked Tractor Grapple - YouTube

Kicking off my review of the Everything Attachments 54" Wicked Grapple. Here's a video trailer I made featuring the grapple! I'll post more videos and reviews soon. COMING SOON TO PROJECTING; EVERYTHING ATTACHMENT TRACTOR GRAPPLE - YouTube

Hello.... Just posted my Wicked Tractor Grapple movie trailer on my youtube page! I'm going to be featuring the grapple in some of my videos in the next few months. Thought you might enjoy a scare! Have a great day! COMING SOON TO PROJECTING; EVERYTHING ATTACHMENT TRACTOR GRAPPLE - YouTube

Hello, Need some advice quick on who makes the best enclosed trailers. I'm considering purchasing an aluminum 6x14 single axle or an aluminum 7x16 double axle. Will be used for moving furniture, etc and also for hauling atvs. Could you all recommend a good quality enclosed trailer...

Hello, I'm nearly ready to order a Land Pride loader 3rd function kit for my L3301. The valve kit number is #380-152A. The instructions only cover a tractor with loader. The instruction do not apply to tractors with loader and backhoe. Mine has a backhoe (BH77). Sooo does anyone have...

Hello, I'm strongly considering purchasing a grapple for my L3301. Of course I will need to install a 3rd function valve and switch. Has anyone made their own 3rd function kit? I'm not crazy about how some of the commercial kits mount. It is beyond me why Kubota doesn't offer their own 3...

I'm debating installing ag or industrial style tires on my ZD326. Currently it has turfs on it. I'm attaching pics (pics I stole off image search) to show the 3 styles I'm considering. R1 (bar tires), R4 (industrial) and Carlisle WT300 tires. Does anyone have any opinions? I can get the...

Well after 10 years it's looks like our 5 ton American Standard heat pump compressor is shot. HVAC guy is saying they are not cheap to replace and it maybe worth replacing entire system. While I wait for repair quote I need to start researching new units and try to determine my best option...

Looks like my tractor's twin! Enjoy!

Hello, Curious if any of you are growing and selling organic hay. I'm getting ready to reseed my field in the fall and am considering going organic. Biggest question is where do you get seed and how much more is the seed. I think if it all goes well I could get a premium price for the...

I really like the Piranha toothbar from BXPanded. You can get them in a variety of lengths... custom made to order. I have a Piranha on my L3301 and L3830... 5' and 6' buckets. They make digging so much easier. You can control digging angle much easier and requires far less power when...

So a couple things to check. 1. Make sure belts are correct length. It's possible belts that have been installed are too long. This will not allow idler pulley to fully tension belts because spring is not extended enough. 2. Make sure idler pulley mechanism is properly assembled and...

Just posted a new video about 3 point hitch trailer movers. Thought you all would enjoy. I'm pulling trailer with a 1953 Ford Golden Jubilee. Makes moving trailers around property handy as a pocket in a shirt! #4, Why U Need a Tractor? Trailer Mover! - YouTube

Just posted new video in my "Why U Need a Tractor?" series. Let me know if you have any questions! (0: #4, Why U Need a Tractor? Planting Trees and Bushes! - YouTube

No. Even though they look similar the L3830 is quite a bit bigger. It's a 38 horse power gear drive. It runs all my 3 point implements including my log skidder hitch. It's basically a field tractor now. The front loader has a lot more grunt. The L3830 has a lot more power than the L3301...

Hello everyone. Just uploaded a video of my new L3301. I do a quick walk around in the video and talk about it some. It is parked next to my L3830 in the video. Let me know if you have any questions. Oh Yeah! New Tractor!! Kubota L3301 - YouTube

Hello, I have a L3301 with FEL and BH. It is HST. Tractor runs great... but the hydrostatic transmission seems very noisy (hydro pump whine). In an effort to quiet the HST whine I'm considering doing a full hydro oil change at 50 hours... it has 25 hours on it now. Normal 50 hour service...

Hello, I will measure it later today and post it. The trailer is excellent. It's perfect match of strength and lightweight. I really like it. I have a new L3301 that I have been using to load it with dirt. Trailer does great with a full load of dirt and floats over soft ground with the big...

I just got basically same tractor! So far I really like it. I have R4's on mine. You got a good price!

The teeth hangs down below the front of the bucket on his loader. So the bottom is no longer flat. Here's a pic that shows teeth hanging below.

I'm curious... why don't you want a Piranha tooth bar?

The bucket has to be drilled. It's not bad at all. I use a hole saw. I'll attach a few pics. The toothbar works great. It's similar to a serrated knife. Cuts into dirt like butter and makes the loader much easier to control. Also it works great when ripping out saplings and brush. The...

Yeah I really like the L3301 so far. Of course I just hauled it home a couple hours ago. But I had driven at dealer. The tooth bar is a Piranha from BXPanded. I have one on my L3830 72" bucket as well. I installed both of them. Eventually I will make a video about it. They improve...

Well I got my new L3301! 1000% better than the L2501 when it comes to noise and exhaust smell. Love the thing already! Also switched to the R4 tires.

Well it's loaded up and ready to head back to dealership. Thank you for everyone's help and advice on my new tractor. I hate to return it but I can't deal with the noise and diesel smell. Hopefully the L3301 will be much better.

I picked up a new L2501 with front loader and backhoe. I'll share my thoughts and modifications for the tractor on this thread. After 3 days here's my initial impressions Pros: -Fit and finish is very good. -Ergonomics for the tractor is very good. I'm 6'4" -I really like loader and...

Well I just got a new L2501 with front loader and backhoe. The engine seems really loud! The exhaust has a metallic rattle sound to it. My L3830 is much quieter sounding. Using a dosimeter app on my phone I measured around 92 db at 1700 RPM. My L3830 is running around 90 db. The L2501...

Latest video in my "Why U Need a Tractor?" series. Video shows the King Kutter Tiller hooked to my Kubota L3830. #3, Why U Need a Tractor? RotoTiller! - YouTube

Hello, Made a video of my L3830 pulling a Woods RB72 Brush Bull (bush hog). Thought you all may enjoy seeing it. Kubota Tractor and Bush Hog Footage - YouTube

2nd video in my "Why U Need a Tractor?" series. I demo yanking a fallen tree limb down and a broken off tree. Then hauling them off with quick attach pallet forks. #2, Why U Need a Tractor? Removing Storm Damage - YouTube

Thank you for the kind words! Here's the quick hitch standards. You can use the below measurements to check your equipment. They should be correct. If your tiller is new it should work. Mine is also a King Kutter Tiller 6' and it fits perfect with no mods needed.

Hello, Just uploaded a new video about quick hitches. I give basic info about my I-Match hitch connected to a Kubota L3830. Let me know if you have any questions. #1, Accessories Your Tractor Needs! Quick Hitch - YouTube

Hello, Another question for the experts here at TractorByNet. I'm very close to ordering a L2501 with FEL and BH. I'm starting to wonder if I should go ahead and have dealer install the 3rd function hydraulic line on the loader. I'm considering purchasing a grapple and would also need the...

Hello, I've started a new video series on my YouTube channel called "Why U Need a Tractor". Over the next few months I plan to make videos highlighting all the ways a tractor can be used! Should be fun! Here's the first video... Bush Hog! Enjoy #1, Why U Need a Tractor; Bush Hog -...

Hello, Very close to ordering a L2501 with LA525 front loader and BH77 backhoe. The quick attach bucket that comes with the LA525 is 66" wide. I would prefer a narrower bucket. Tractor is around 55" wide. The B2650 loader can be had with a 60" bucket and a 54" bucket. My question...

Here's the first assembly video of the MUTS trailer! Ultimate ATV Trailer, Pt 2 Frame Assembly - YouTube

Hello, Good thread. I have a MUTS trailer from Canada. Excellent trailer. Here's a video where I'm talking about it. Check out my other videos on assembling it, etc on my channel. If you buy one from MUTS - Multi-Use Trailer System for your ATV, Quad and 4 Wheeler please mention my...

Hello, getting real serious about ordering a L2501 HST with loader and backhoe. I'm currently debating which tire type to pick. R1 Ag tires or R4 Industrial. Tractor will be used in fields and edge of woods. Minimal road usage. Some work could involve spreading gravel, etc. Of course...

Hello, Strongly considering buying a L2501 or B2650 with backhoe and front loader. I'm curious what people's opinions are for these two tractors. The L2501 seems very comfortable for me. I'm 6'4" and it fire me well. The L seems like it's about same size as the B but maybe a little...

Here's a pic of the WT300. Interesting tire.

They are R1 Ag tires. This pic helps to understand difference

I'm interested in purchasing an enclosed trailer. Single axle 6x14 or possibly 7x16 tandem. I really like Featherlite's trailers but they maybe too much money. Anyone have a suggestion on a good quality enclosed trailer? I'm very familiar with flat bed and dump trailers. But enclosed...

Hello, I'm interested in getting started in square bale production. Small square bales around 50 lbs. Currently I have a Kubota L3830 with loader. Also have a 1953 Ford Golden Jubilee. Basically I need advice on picking good quality used equipment. Cost for this project is a big factor...

Just uploaded the first of two MUTS assembly videos. Let's you see what's involved with getting the trailer up and running. https://youtu.be/1UzCX690olM

Anyone growing pumpkins for profit? Curious about what varieties you grow and what you market is. Also rough profit per acre, etc would be great! Thank you for any advice.

For discussion I've attached FEA on beam with only edge support... This roughly represents trollies. Load is at 10,000 lbs. Note safety factor of 0.6. Again take this info with grain of salt.

First of all take this info for what you paid for it. Which was nothing. In other words its for discussion only. :rolleyes: Attached you will find FEA of OPs spliced beam... using tapered and square scab plates. Note hot spots at points of scab plate. With that being said, highest stress...

I haven't forgotten about the thread! I have been putting the MUTS trailer together when time allows. So far so good! I will make a series of videos on assembling the MUTS and also using it. That's what I'm working on now. Here's a sneak peak!

I'm starting this thread to discuss and review my new MUTS ATV trailer. Feel free to discuss your trailer if you have one or ask questions. I'll also post videos of the trailer as time allows. Developed in the Canadian north Ontario woods, the MUTS trailer is built for towing behind am...

I really like my Kubota Diesel. But might be an overkill for the OP. Diesels are the way to go if you mow a lot. Very fuel efficient, tons of power, and super reliable. Here's a couple vids of mine. https://youtu.be/DOYVLzbxeEg https://youtu.be/DsZKBqIDUJw

Howdy ya'll Thought you may like my video of the ZD326 front jack feature. Sure makes accessing the mower deck easy! Really sturdy too. Just let me know if you have any questions! https://youtu.be/pj4gLB0nXe8

Getting back to the forum after being gone for sometime. Looking forward to discussing projects and sharing my projects with you! :D