Search results

I have a new 3032e with loaded tires, 305 fel and a 6' rotary cutter/bush hog. The tractor weighs about 2100 lbs. I would guess the loaded tires add 600 lbs and the 305 fel is around 700 lbs. The TSC brand cutter should be around 700 lbs. That adds up to 4100 lbs or so. I would be happy...

I found a AC disk about an hour from me on tractorhouse.com. I know nothing at all about this model and a google search has turned up little. Any thoughts on this disk? See it here: ALLIS-CHALMERS 200 Disks For Sale At TractorHouse.com Is this something I should drive an hour to check out? I...

I took delivery of my 5055e yesterday. Mmmmm, new paint! I started out looking at the 3038e, thinking that would be enough tractor for me. I have 33 acres that I'm not sure what to do with yet, other than plant something and raise a few animals. Well, along the lines of "buy a bigger tractor...

I have purchased 33 acres of mesquite and dry dirt that I am planning to homestead. Small scale farming if you will. I'll have a garden and some animals and probably plant a little hay. I do not plan on baling it as there are several local guys who have large balers. I am using my dad's...

I recently purchased 33 acres of mesquite near Wichita Falls, TX. My dad is kind enough to loan me his bulldozer to clear the land with. I have had a little experience on it in the past but nothing like what I've gained over the last two or three days. I have a whole new appreciation for the men...

I have purchased 33 acres of mesquite and dry dirt near Wichita Falls, TX, and plan to cultivate it for hay and such. Nothing commercial. Just for myself. I am looking at different tractors and trailers to haul a tractor on. Here is my question... Having been inspired by several posts here...

Here are the details: 2005 JD 4010 - 225 hours; very good condition. 18hp Yanmar; MFWD; hydrostatic; mid and rear pto; Cat. 1 3pt. Has 410 FEL, 4' Frontier box blade; R4 tires. I'm wanting to sell/trade my 2005 4010. I use it to mow (shred) almost all the time and would like a dedicated...

I have the R4 tires on my 4010. The fronts are 5.70-12 and the rears are 10-16.5. I would like to get a mmm and use the tractor to mow around the house, but the skinny front tires cut ruts. I have looked at the tires on the 2305 and they seem much wider and less likely to dig in. Can I get...

First, this is not mine, I just ran across it while perusing the local Craigslist Farm & Lawn section. It is in Killeen and looks to be a pretty good deal. I would certainly pay $500 for it if I wanted one. I don't know who is selling it nor have I contacted them. I'm just posting it in case...

The JD dealer just picked up my tractor a few minutes ago. Saturday morning I was running the 4' KK tiller and enjoying a fine morning of seat time. All was well until everything but the engine suddenly stopped. I had no hydraulic power to anything, including the hydrostatic transmission...

Makes moving the trailer easy and painless...

I would like to put up a locking mail box on our rural road. I'm concerned about mail theft and vandalism. My requirements are: 1. Large enough to hold mail for one week if needed 2. Can accept small packages (say 6"x6"x10") 3. Access to mail should be from rear. 4. I'm willing to pay some...

A couple of years ago my parents purchased a large swing/monkey bar/play fort set for my kids. The rugrats have really enjoyed playing on it. Well, we've sold our house and are in the process of starting on our new place, and I did not want to leave the swing set behind. So, it needed to be...

I have about three acres in front of my house that I have planted in bermuda. It is not quite one inch tall, but it will soon be ready for mowing. I have a 54" MMM on order for my 4010, but I am now thinking about canceling that and letting a cow and/or goat do the job. My thinking it that...

I have 3 acres planted in bermuda and will need to mow it when it gets tall enough. I purchased a RFM (rear finish mower) from TSC not long ago, but I'm thinking about returning it and getting a belly/MM mower. The land is flat with about 25 trees, some of them just 20 ft apart. Would a MMM...

I've finished tilling and working my 4 acres and have seeded it out. I've decided to sell my tractor and just get a riding mower. I purchased it new in December and it has 53 hours. It has a 410 FEL and R4 tires. I'll throw in the 48" box blade and 48" tiller. Would $11,500 be out of line?

I attached my new 5' KK RFM last evening to my JD 4010. When I got everything on and hooked up I engaged the PTO at about 1500 rpm. The whole thing shook and killed the tractor. I tried again at 2000 rpm and again the entire vehicle shook but the tractor kept running, although it did bog down...

Look what followed me home today... I asked the manager if he could make me a deal if I purchased both items at the same time. Sure enough, he knocked off 10%! It never hurts to ask. Any recommendations on where to purchase the gear lube and what kind?

Would anyone know how much weight the 410 FEL adds to my 4010? I'm guessing 500 pounds, but that is just an uneducated guess.

I want to purchase a 48" tiller for my 4010. The PTO hp is rated at 14. Will there be any problems with one from TSC like this one?

I brought home my new 4010 yesterday and finished putting up a small covered "shed" for it today. The shed is just a roof, but it will keep the rain, sun and frost off. I've had lots of fun already and have been impressed with the 410 fel. I also learned that I stink at box blade work...

This morning I purchased a new 4010. It was the last one left and was sitting in the showroom. I gave $13,032 for the tractor, 410 FEL and a 4' box blade. The discounts were very helpful, $800 off the tractor and $100 off the FEL. The dealership will put it all together, load the tires, and...

I'm going to put up a shed for my soon to arrive 4010, but I don't know how long to make it. Could someone give me the approximate length of the 4010 with a fel and box blade? Does not have to be exact, just within a foot or so. In fact, I'll probably build the shed 4-6 feet longer in case I...

Normangee Tractor in Normangee, TX has quoted me $11,200 for a B7510 4WD gear shift tractor with FEL. Is this in line with the market? I want a PHD (post hole digger) to go with it and the quote for that was $695. That seems high to me, and the explanation was that it is shorter than the...