Search results

A "Sandwich short of a Picnic" "not the brightest candle in the box" " about as useful as an Ashtray on a motorbike"

A peaceful riot is where you do not "shoot" , "loot" or "r--t" anybody

Death cap mushrooms , there is a Court case right now in Australia where a women made Beef Wellington and included Death cap mushrooms , poisoned 3 rellies (they passed away)

" Youse" means everybody , "Beyond the Black Stump" means a long way off or away , "Struth" means are you sure or I've never heard of that The list of Australian slang goes on forever and a day , theres another one , well blow me down

I use AI every day , It is called "Actual Intelligence" works for me

You can buy a pre-cleaner oil , better than WD40 , it is quite sticky and definitely traps the dust and debris

Why don't you ring the mower or tyre manufacturer and ask easy as

What does the manual say about tyre pressures ? Manual says do not touch , that surprises me Generally those rear tyres only run a low pressure 10 to 12 psi on convential Cub mowers , out front might be the same , I would check for sure

Brand new , ask the dealer all the questions , that is part of his job

Good old fashion Black shoe polish will give you are nice look , not too shiny and waterproof as well

Not at the moment Thank You , plus where do you get Justice not in the Court system

Truth , Accuracy and the Australian way , bit like Superman only better

Vacuum them out in the reverse direction of suction or look around for a company that does air cleaner washing

I would not contemplate washing my Ride-on , they are not made like cars (proof-coated) so rust etc can get a hold quite easily Any stubborn marks come off with a damp cloth/chamois Also do not use the deck wash feature as it can clean out the grease from the spindles very quickly

I would suggest it may work the GT2544 and the GT2550 only difference was the deck width , 44" versus 50" Measure pulleys etc before you start

On my ride-ons I have just waxed them from new and occasionally a wax touch up , dirt just blows off Does the job for me

Try this https://www.cubcadet.com/en_US/content-asset-page-includes/ari-partstream.html#/Cub_Cadet/7200_Tractor_54A-433D100/Front_Axle_MFD_(Part_1)/78f05eec-7f0a-479f-a3c8-a8c233cec59f/d618f20b-4847-48d9-b25d-8e70fc364139/y

Go to the Hydrogear site and look up BDU 10 it will give you the correct info Tracter

The fuel filter should be on the left hand side near the oil filter

how to remove petrol tank from z-track 717 john deere zero turn mower

Heres a small bit of my wood (Eucalyptus Punctata) for this winter Now thats a hard wood

Would it be possible for an alphabetical listing of members when they are online. This would allow a quick check to see if someone you know or correspond with is online

With a lot of the new Cubs coming out with power steering , what are your thoughts and opinion on retro fitting it , possible or not ?

Why is the name Zert used in America when talking about the good old fashioned grease nipple ?

Recently purchased a GT 2550 and have a query about the cutting height settings. To get the deck to its lowest I have to remove all the gauge wheels however the hangers to which they are attached are touching the ground. Consequently when you mow and turn they plough into the ground. The obvious...

Hi , have been a Cub man for 15 years had a HDS2155 and just acquired a GT2550 , done all my own maintenance and had very few problems