Search results

If you order a rotary cutter from EA, is it completely assembled upon arrival? How well do these two brands hold up??

The gear box itself didn't fail...the shaft that comes down onto the pulley failed and wallowed out the big pulley and the little key lock. I bought a new gear box because my dealer's parts dept. said that was the only way to get a replacement....turns out they were FOS...I called Messick's...

My gearbox was $1100. I have a mechanic who keeps everything up to snuff and is very good. I have 4 mowers...a 1999, 2003, 1984 in addition to the Kubota and have them meticulously maintained. Also a 100 inch Rhino, 90 inch Woods and a 121 inch Land Pride that are pull behind finishing mowers...

Well it's happened to me. And how about the gear box and water pump?

No I am the only driver and no I have not hit anything.

My F2690 now has 700 hours. It is a 2017 (or maybe 2018) model. Thus far I've had to replace the gearbox on the deck this year and recently I have had to replace the water pump on the motor. Also I had to get my mechanic straighten the arms that connects the deck to the body of the mower. I...

I have had very poor wear on the blades for my 990X. I went to order some more and they are now labeled 29186 "KT". The KT is a new added designation...previously I ordered only 29186 blades. These are listed as the replacement for the old number. Does anybody know what the difference is? I...

The air intake for the engine has a hose that comes through the wall just above and to the right of the radiator. I am constantly having to remove the air filter from it's housing and blow out the dirt. Anybody else have this problem? If so is there a work around to prevent it. If I forget...

I've got what looks like some green mold inside my sprayer. Don't know why it's there. Would Chlorox harm my pump if I put some in the sprayer?? Any other thoughts on how to get rid of it?? TIA

Anybody with experience with this rotary cutter? Looking at buying one and anyone with experience with one would be appreciated.

I have a TN70 and am looking at a rotary cutter that requires a 1000 rpm pto. Is there any way to convert my pto output to this?? TIA

I have a good deal on a used rotary cutter, but it is a 1000 RPM model. My tractor is a 540 machine. Can this tractor be converted to use this cutter?? TIA

I am about to pull the trigger on an f 2690. Any hints or things to look out for? Is it powerful enough. Is the HST equipped with a high and low range? Looking at a 72 inch rear discharge deck...thoughts on that?? Reliability good? I would have gotten the 3990 but was scared off by the DPF...

I am looking at a 4500 but require diesel instead of gas. Does anyone have one? 25 horsepower seems a little low to me. Is it powerful enough? Disappointed they don't offer a 72 inch rear discharge mower as far as I can tell. The articulated deck does look to be rear discharge. Not sure...

Looking at buying one, but would like to have feedback. Or the non cab models, too. TIA

Any one know of a website that sells remanufactured radiators?? My MC35 has a leak that doesn't look like it can be fixed. New Holland wants $1175 for a new one. Must have gold somewhere in the core. TIA

I need to move a bush hog about 30 miles. It is 110 inches wide and weighs 1600 pounds. Any ideas on how I could get it moved?? I am really stumped!! It does not have pneumatic tires. It has a hydraulic lift on the back tires...i.e. it is not a three point attachment.

Anybody have one of these? Thoughts on it? How much do they cost? TIA

Anybody have one of these? Thoughts on it? How much do they cost? TIA

My mc 35 (front deck commercial mower) has a 35 hp Shibaura diesel engine. 1300 hours. Runs good....but yesterday I noticed some white/blue smoke coming out under mid chassis. It looks like there is a vent tube from the valve cover that goes down there. I have never noticed it before. It...

I need to find another source for blades for my mower. The Woods blades only last about 3 weeks and they are gone. Any sources I could try. It's a weird blade...about 13 inches long and it takes 6 of them. Any help would be greatly appreciated.

My year old problem that I posted on a few weeks ago was solved today. The people at the dealership still don't have the computer, but they called the factory reps, etc. and replaced a sensor in the right side of the dash.....47130085 and voila the problem is solved. I am not sure what this...

My old boom sprayer finally bit the dust. I have been holding it together with temp fixes for years and decided now is the time for a fresh start. Went looking today and found two types. One is the folding arms boom like I have now and the other type features a very short bar with nozzles...

I have a 2002 or 2003 TN75S. It has the electromechanical tranny. There is a warning light that blinks all the time. The tractor works normally. The dealership looked up the code and gave me a list of things it could be. However, they have no computer that hooks up to it and gives the exact...

I have a land plane I use for our gravel driveways and the parking lots at church. I have never tried it on pure dirt roads. My farm has some areas with a good bit of rutting. How well do these things work if there is no gravel?? I love it on graveled areas. However, the farm is 20 miles...

My 3010S clutch always engages it the very top of the pedal excursion. Now it is slipping quite a bit. Only 396 hours...but most all of that with front end loader. Is there any way to "tighten" the clutch? Or, am I looking at having to replace it? Is that a big job if I have to replace? TIA

I have an exhaust pipe that comes off the engine and routes down below the left side step. It fell off today and I ran over it with the bush hog. It's mangled. Now the exhaust comes out of the tractor's left side just below the hood and blows straight downward. I have ordered another pipe...

I need some help in figuring out how to do this. It would be relatively easy is there were access holes cut into the deck. Anybody with experience with this? Looks to me to be a tough job getting to the Nylint bolt to remove it. TIA

My TN75S had a error code that started today. It is red and on the far side of the dash. I can't tell anything is wrong using the tractor. It looks like a symbol of a four wheel drive and is blinking 5 3 3. I have the electronic shuttle. Does anyone have an idea what the code means...

I thinking about buying a MF 4610. Does anybody here have one and if so what do you think?? I am a little concerned about 99 HP coming out of a 3 cylinder engine. Do you think it's heavy enough to pull a 15 foot batwing bush hog? Looks like a weighs about 6900 lbs., which looks a little...

I've got an MC35 has what looks like a 914a deck mounted out front. The belt is getting stretched out and is going to need changing. I hate to pay the dealership a service charge and would like to change it myself. I was looking at it this afternoon. Will I need to take the driveline to...

I've got a NH 3010 that I use only for FEL work. It's got a big Bush Hog brand FEL on it. With a full bucket, the back end gets pretty light. I thought about a ballast box, but now am leaning toward liquid in the tires instead. What do you guys think about that? What liquid? How full (I've...

I would really like to be able to use a hydraulic top link on my tc33d. Unfortunately, this little tractor doesn't have any remotes. It's a '99 model but only has about 1000 hours, but I don't want to spend a fortune doing this. Can anybody suggest what I can do. Is there an electric model that...

I would really like to be able to use a hydraulic top link on my tc33d. Unfortunately, this little tractor doesn't have any remotes. It's a '99 model but only has about 1000 hours, but I don't want to spend a fortune doing this. Can anybody suggest what I can do. Is there an electric model...

I have a land plane I have never used. The church I go to has some rather large gravel "overflow" parking lots that are becoming unlevel and have areas that need gravel redistributed back on to them. First question....is this a good tool for this? Next, can a fairly experienced tractor...

I filled my tank and left the top off the fuel filler pipe. After about 4 hours cutting, the tractor began to run like it was fuel starved. I noticed the fuel filter was very dark and began to inspect and found I had left the cap off the fill area. There was lots of dust and clippings all...

I was washing off clippings from my TN 75 New Holland and noted that when I wet the hydraulic area below the remotes that it steamed like it was very hot. I had not really been using the hydraulics for anything other than raising the finishing mower and driving about an eighth of a mile. The...

I think I will soon need to replace my Galaxy rear turf tires. They are sized 22.5 x 16. I have been floored by pricing thus far. Is there a good source for these? Is there another brand of turf tire that won't be so expensive that I could look at? TIA

I think I will soon need to replace my Galaxy rear turf tires. They are sized 22.5 x 16. I have been floored by pricing thus far. Is there a good source for these? Is there another brand of turf tire that won't be so expensive that I could look at? TIA

I am confused. Looking at the NH website, I can't tell if the powerstars are an upgrade or economy version of the T4000's. Can anyone enlighten me? TIA

I have a 9 year old Rhino FM 100 that looks like has finally bitten the dust. I have used the heck out of it and am not disappointed. I am looking at the Rhino TM 100 or the Befco Cyclone C 70-110 for the replacement. Anybody have any ideas on the 2 mowers or other single deck mowers in the...

Is there any reason that tractors in the TN or 4000 series don't (or can't) have hydrostat transmissions. I would love to have one on my TN75S. I am sure that there must be a reason, but I can't think of one. Any comments or thoughts would be appreciated.

I added some oil to my MC35 (3 cyl. 35 HP diesel with front mounted deck). Being in a hurry, I just poured some in out a large bottle and now it's above the full mark. Is this anything to worry about? TIA BTW that should be overfill up in the header <G>

The dealer took my TN75s in for service. Somehow I have gone from 1008 hours this time last year to 2340 hours on it's return. I would imagine I put 200 or at most 300 hours on it last year. Therefore, I should have about 1300 hours or so. I asked about this and they said they didn't know...

A friend borrowed my mower this afternoon and proceeded to jam the deck into the ground and wrap a large piece of telephone cable around one the spindles in less than 5 minutes. He noticed "smoke" coming off the deck and eventually disengaged the middle PTO. I arrived and got the cable loose...

I am cutting a kid's soccer field.....about 5 acres....using a Rhino 100 inch finishing mower. It's a rear discharge, 3 blade, solid deck pull behind on the 3 point hitch mower. I am cutting these fields twice per week and at about 1.5 or 1.75 inches height. The fields are bermuda and they...

I have spent the last 30 minutes trying to find the hydraulic dipstick on this tractor. The FEL has a little hitch and I wonder if the hydraulic fluid is a little low. Despite all efforts I can't figure out where to check the fluid. Can somebody help me. Thanks.

After having to replace my radiator in my TC 33D, I have become obsessed with keeping my radiators blown out. My 75 has cab and air and the oil cooler and A/C condenser both sit in front of the radiator. Does anyone know if the A/C condenser will slide out to the side to allow better cleaning...

I have a 1999 TC 33D with about 600 hours. Been a great tractor. I was spraying a soccer field at church yesterday and had a sudden steam antifreeze bath. I thought probably a bad radiator hose.....but I was surprised that the portion of the radiator that is welded on as the superior portion...

I checked my oil in my MC 35 today after noting the engine running a little hot. It was 2 quarts low. Have I damaged my engine?? I love this front cutter and hope I haven't really screwed up. Someone tell me whether to be worried. Any idea how much it holds? I will always check it myself...

I need to mow a soccer field and get the smoothest cut possible. Is a flail the answer? Total cut area maybe 2 to 2 1/2 acres. Size and brand? I have either a 33 or 75 HP tractor I can use. Thanks

I have a 2000 model Tc33D. I am using it to cut soccer fields at my church. It has "industrial" tires. While they are not nearly as bad as real tractor tires, they do leave noticable tracks on the playing surface. Any suggestions on how I could get turf tires without a mega buck investment...

We have a TN65 (non cab) that's about 3 years old....the last one before they shortened the snout on them. We have three larger tractors, but my farm partner hooked up a 10 foot Woods rotary cutter to it while the batwing used on the larger tractors is getting some repairs. I used it today and...

I looked at both of these tractors today at the dealership. Both with cab, 4wd, etc. TN has allergy filters and the electronic shuttle, but otherwise about the same equipment. The TN was $35k and the TD was $36k. TD seemed like a much larger tractor and certainly has a lot more horsepower...

My TN70 has started something wierd. I can raise the 3 point hitch normally, but to let it back down I have to hit the clicker button up on the wheel well. The short button raises the hitch normally and when I hit the long button it does go back down normally. However, when I raise it...

I have an interesting dilemna. I went to price a FEL for my TN75D and it was about 8 grand. The difficulty was that I have turf tires and the tractor sits VERY low to the ground and the dealer wasn't sure how it would work. They have a 3010 with a very heavy Woods FEL with a little larger...