Search results

Results 1 to 39 of 39
  1. R

    Is quality going downhill?

    Maybe I'm just getting old and cranky. I have had to send items back or use warranties more the last year than ever before. Bought an air rifle from a major manufacturer that will not group well from a rest. It is going back tomorrow. Bought a scope for the rifle that became fuzzy after a...
  2. R

    Not so good movies

    There are several that I could not watch beyond the first few minutes. Men in Black, Gravity, Fiddler on the Roof, Life of Pi for a start. Am I alone?
  3. R

    Coouple of old pictures

    Going through some negatives my Mom had, I found a couple I thought would be of interest here. These were taken in the 1930s in Colorado, one in the Walden area. The other I don't know.
  4. R

    Free prescription discount cards

    I have seen these things in doctor's offices and elsewhere. Are they any good? It does not seem logical to me that without some kind of financial incentive that anyone could expect them to work.
  5. R

    Ethanol free gas?

    I notice that small engine manufacturers recommend ethanol free 87 octane gas, or an additive, or 91 octane. I have been using whatever is available for years with no problems. I do use Stabil in my gas cans, usually double the recommended dose. Is Stabil a satisfactory additive? If not...
  6. R

    Gator 620i question

    Just bought a '08 Gator 620i. Was poking around the engine area and found a loose machine screw with a nut attached, run up to the head. It fits into the throttle mechanism, above where I found it. If it belongs there, it apparently would adjust the idle or minimum throttle position. The...
  7. R

    YM1500D water pump

    Read a thread started about 7 years ago (http://www.tractorbynet.com/forums/yanmar/181464-yanmar-1500-water-pump-solution.html) and got to thinking. Hoye now offers a water pump kit for the 1500. It is probably the best way to go. However, my Scotch ancestry and DIY attitude said to try...
  8. R

    Extra wire?

    Putting my YM1500D back together, I find an extra wire. It goes with the bundle (two other wires) toward the rear end. According to the schematic diagram in the parts manual, there should be two wires there, one to each light on the fenders. The schematic diagram shows three other connections...
  9. R

    1500 question

    One lesson I am constantly relearning is that there is no such thing as a quick project. The steering locked up on me three times the last time I used the tractor. I figured I was going to have to go through the steering gearbox. That requires removing the instrument panel. Got part way...
  10. R

    Windows gripe and a question

    A couple of updates back it appears Microsoft deleted the games from my computer. After digging around I found what appears to be different versions of the same games. I attached them to my desktop and tried them out. The displays are different and the games differ somewhat. It is...
  11. R

    Hot water recirculating pump

    The master bedroom in my house is about 30 feet from the water heater. About 16 years ago I put a recirculating pump under the counter to avoid waiting for hot water from the faucet. The pump has a timer and a thermostatic shut off. It finally quit and I am looking for a replacement. There...
  12. R

    What is it?

    Found this in the garden while removing some weeds. I thought it was interesting. SWMBO thought it might be carnivorous. The flower is about 1/4" from top to bottom.
  13. R

    New telephone scam?

    I got a call from someone with a foreign accent claiming to be from Microsoft. It seems my computer is somehow responsible for some kind of mischief. Before he got into the details, my temper got the best of me and I responded with an impolite remark and hung up. This is the second time this...
  14. R

    Carburetor problem

    This isn't on a tractor, but it does relate to agriculture on a small scale. Besides, I don't know of a better place to get some free skilled advice. :) I have a shredder with a B&S engine. After rebuilding the carburetor I have had some difficulty getting it to run. It now will run for 3...
  15. R

    Attack site?

    What gives? I get a warning that Google has determined this is a "reported attack site."
  16. R

    Use of compression release

    I realize the compression release is to be used only as a starting aid. My neighbor recently bought a well-used gray market tractor from some folks that told him that pulling the compression release is the way to turn the engine off. He has put maybe 10-20 hours on the meter and now it won't...
  17. R

    Problem reading thread

    When I click on individual posts listed in the box at the top of a thread, all I get is the same page. None of the posts below that page seem to be accessible. I have not had this problem before. Everything seems to work ok on other forums. Is my computer acting up?
  18. R

    DeWalt battery question

    The batteries for my DeWalt 14.4v drill are dead. While searching for replacements, I found what appears to be an identical battery for a B&D drill. One reviewer on the website stated the B&D battery would fit the DeWalt drill. Since the B&D battery price is less than 1/2 the price of the...
  19. R

    Nature Conservancy

    I just received a copy of an e-mail stating the "Nature Conservancy is taking over the Forest Service." Apparently the two organizations are going to work together in the national forests in New Mexico and Arizona. The e-mail makes it sound like the Nature Conservancy is going to set the...
  20. R

    1500D ROPS

    The attachment is for those interested in a picture of a 1500D with ROPS. I found the installation pretty easy. There were a couple of minor problems: hole misalignment and interference with the 3-point hitch lift arm. The mounting holes in the tractor had to be cleaned out, but a small wire...
  21. R

    Politics

    This forum is undoubtedly the best run of all I have observed. The membership is quite diverse and, at least generally, very polite. I have seen threads closed because they were political in nature, even when the discourse was friendly. I don't understand why, but I'm not challenging the...
  22. R

    Value of credit rating

    Apparently a lot is tied to one's credit rating now. We have been thinking about dropping a credit card with an annual fee, since we got another without a fee last year. A neighbor told my wife that would cause my credit rating to drop. If so, should we care? We have no plans to borrow any...
  23. R

    API GL-5 in GL-4 application

    Just checked out the thread talking about yellow metal compatibility in some grades of transmission oil. That sparked a question. I gather that GL-5 is made for more demanding applications than GL-4, so it seems reasonable that using -4 in -5 applications is probably not good. Are there...
  24. R

    UPS question

    I think I am going to fix this problem by just uninstalling the software, but I though I'd ask the question anyway. I just purchased a new UPS (uninterruptible power supply, not a delivery company) which came with software that is apparently supposed to do some great things if the power goes...
  25. R

    Underground propane tank

    I am looking into purchasing my own propane tank. Has anyone had any experience with underground propane tanks?
  26. R

    Purple Ice?

    While cruising the web, I came across mention of a product called Purple Ice. It is apparently similar to Water Wetter. Anyone had any experience with it?
  27. R

    SSN use

    A few weeks ago, I thought I heard something on a newscast about a recent law prohibiting insurance companies from using SSNs on their customers' ID cards. On Christmas day my FIL said he had had discussions with his insurance provider and union on the subject and they had changed their...
  28. R

    Concrete mix question

    I am a devout do-it-yourselfer. If I don't know how to do it, I find a book and learn. I have a book on concrete work and it states clearly that the water should be clean and the sand and gravel should be washed, free of dirt and organic matter. A couple of years ago, I hired some work done...
  29. R

    Backup generator--again

    A reply by 40Kchicks to my previous question about propane backup generators got me to thinking. A portable welder/generator would be much more useful. I have a 220V buzz box and a small 110V wire welder. A generator capable of handling them would serve my purposes. A few years ago I tried...
  30. R

    Propane backup generator

    A nearby forest fire knocked out our power for nearly a day last week. That got the wife concerned, primarily about running the pump to ensure we had water for the goats. We are considering getting a 7kW propane powered backup generator to connect to our garage/workshop to run the pump and...
  31. R

    YM1500 loader capacity

    Does anyone have an idea how much weight a loader on a 1500D can lift? I am considering ordering a generator which weighs about 450# and wonder if I should be looking for a way to unload it from a truck when it arrives.
  32. R

    Oxy/act torch leak

    Not sure this is the appropriate forum for this question. A glance at previous posts indicates there are a number of welders to be found here. I had bookmarked a welding forum on countrybynet some time back, but it apparently doesn't exist anymore. Anyway, I find my oxy/act torch leaks at the...
  33. R

    Hitch installation

    I appeal to the superior mechanical abilities of my fellow TBNers. I bought a receiver hitch to install on the wife's truck. It requires four bolts and 1"x2" spacers be placed inside the box frame, about 8" and 18" from the end on each side. Included are four "bolt leaders," stiff wires with...
  34. R

    Tachometer cable

    The tachometer on my 1500D is starting to jitter a bit. When the speedometers on my trucks did that in the past I could find a small bottle in the parts stores which was to be attached to the speedometer end of the cable to lube it. (That was before the automakers changed the design to...
  35. R

    Quick Disconnects

    I see from other posts that there is a hazard to the hydraulic pump if a quick disconnect should accidentally come loose. My 1500D is presently apart. Someone suggested to me that I should put quick disconnects on the loader hydraulic lines before putting it back together. I haven't had a...
  36. R

    My tractor broke!

    My 1500D is down with driveline problems. The coupler from the clutch shaft to the input of the transmission has lost its splines and the transmisison input shaft has been damaged. I had been removing gravel from a wash, not pushing it very hard. Running about 1500-1800 rpm in first or...
  37. R

    Traction 5-14 traction tires

    Owners of YM1500D tractors can rejoice. Firestone now imports the 5-14 lug-m tire. Ask for article # 344-443B. It was not in the catalog when I ordered mine. The Des Moines warehouse stocks them. reb
  38. R

    3-Point Hitch Hitch Pin Torque

    Just acquired a JD rotary cutter. The lower hitch pins are relocatable, with a high position for large tractors and a low position for small tractors. I assume that the 1500D is in the latter category. The manual states the torque on the lock nuts should be 435 lb-ft. That is beyond the...
  39. R

    1500D PTO

    I gather from reading the parts manual that my 1500 has a 3-speed PTO. However, I have been able to engage only one speed, with the lever pushed down and (I think) back. Am I missing something or is there a problem somewhere? Thanx.
 
Top