Search results

Results 1 to 50 of 191
  1. dusty3030

    Starting Excavating Company, Insurance/Bank Recommendations

    Might want to research the licensing more, you probably do need to get a contractors license. Especially if you want to take any jobs relating to anything to do with a septic tank / field. On business insurance I've found it more advantageous to find a good local agent than whatever particular...
  2. dusty3030

    Where to find this piece

    McMaster Carr is a good resource. They ship quick too. McMaster washers
  3. dusty3030

    Fuel in oil sump (a lot of fuel)

    On that engine there are 4 individual fuel pumps built into the engine, one for each cylinder and they are operated off cam shaft. They are a SOB to replace and are supposed to be done in sets. I don't know how you would test to know which one would be the culprit. Here is a video showing a...
  4. dusty3030

    How to broadcast seed evenly

    Is the field already prepared? How are you going to cover seed once spread? Might check and see if you can rent a drill. That would be the most accurate to plant and would get the best germination rate. Local soil conservation service should have drills to rent and you usually just pay by...
  5. dusty3030

    RK37 Weight for hauling to first 50 hour service 129 miles away. I need a trailer.

    I don't think they will hold 83 gallons each. The tires on a RK37 aren't big enough to hold that much. 83 gallons total more likely, roughly 40 gallons a tire is the most I think you could put in there to cover the rim and leave an air pocket in the tire.
  6. dusty3030

    Sporstman 500 H.O. Polaris Question

    Personally I'd just keep running the reliable one till it falls apart. You know it, it has served you well. Replace what needs replaced when if it breaks and rock on. The unreliable one would be good trading fodder. You might see an implement or tool or something you want that someone might...
  7. dusty3030

    Kubota Interim Tier IV Motor Oils

    The chart is on the Kubota USA main website. Click on service and support tab then the maintenance tab.
  8. dusty3030

    Kubota Interim Tier IV Motor Oils

    It's been hashed out here and on other forums. Since the manuals were printed Kubota has updated their recommendations. Double asterisks on this chart refer to this change. I use Rotella T6 0W40 in my M7040. Kubota Fluids Chart
  9. dusty3030

    NX4510 starter not turning over

    I had this problem on a 2020 built NX6010. You've gone through most of it but one switch I didn't see you mention is the brakes must be locked together, there is a switch on the lever that locks the two brake pedals together. It must be in neutral. PTO off. Brake pedal pressed, weight in the...
  10. dusty3030


    What's the engine oil look like? I'm thinking you probably have a leaking head gasket.
  11. dusty3030

    When is it time to repalce the tires

    And when they start leaking, tube them and use them 10 more years.
  12. dusty3030

    Brand new KIOTI dead on arrival

    Sounds like the dealer is throwing parts at it. Obviously it starts and runs, it just won't stay running. Could be as simple as a faulty fuel cap vent or loose safety switch. If they are troubleshooting by just plugging it in to their diagnostic tool and throwing parts at codes you might be...
  13. dusty3030

    NH-134 Hydraulic fluid

    I guess a question to ask is what have you ruled out? The 134 spec oil is pretty basic and there are many, many good products that would work well for where it is called for. What's it going in? At Tractor Supply the Traveller Premium Universal meets it, the Mobil Delvac on sale right now at...
  14. dusty3030

    Big Tex Dump Trailer stolen from ranch early this morning...

    Trailer thefts are rampant in my area. TN doesn't require they be tagged for personal use, steal trailer scratch off VIN and call it homebuilt. Arkansas requires tags, but are so lenient you can tag anything without being questioned. Scratch off the VIN, call it a homebuilt, and get a...
  15. dusty3030

    Get rid of those bent axles!

    Camber, you don't need no stinking camber.
  16. dusty3030

    Bought a Kioti CK3510SE TLB, Package w/ Trailer & Attachments

    Yes looks like a Wicked 55". I use a cheap bungie cord to hold the hoses up that I connect to the loader tube (cross bar that says Kioti in your pic). The bungie keeps them out of the way but if they get caught it will stretch / break before the hoses so I kind of see it as a fuse.
  17. dusty3030

    Bought a Kioti CK3510SE TLB, Package w/ Trailer & Attachments

    EA Wicked grapple and a Woods Brushbull to boot. Nice setup!
  18. dusty3030

    10 ft disk

    If I was looking for a disk for a 3020 and for what your are doing I'd be looking for a pull behind and not a 3 point.
  19. dusty3030

    NX Series Parts/Owner/Workshop Manuals - PDF's

    It’s a huge file- satellite internet probably is your problem.
  20. dusty3030

    Should I say something

    Here’s my take - approaching this person who bought it has no upside. 1 It’s kind of creepy. You sold it. Let it go. 2 The new owner may be very well satisfied with his purchase. All you will accomplish is make trouble for him.
  21. dusty3030

    Tractor News Bad boy compact tractors?

    @kittyhawk You are correct they show 2 speed, but every video the dealers themselves are putting out with descriptions and reviews clearly show a 3 speed transmission in them.
  22. dusty3030

    Advice on replacing JD4720

    L47 and even more so M62 outclass anything else in that size. A regular compact tractor with a hoe isn’t even in the same class.
  23. dusty3030

    Pulling down a block chimney?

    Yep. Wouldn't have to go all the way down with it by hand, but I'd want to really get a good idea of what I was dealing with before I took it down all at once. Hate to find out it was holding the wall up the hard way.
  24. dusty3030

    Pulling down a block chimney?

    I'd rent a man lift and take it down from the top by hand.
  25. dusty3030

    Need info on Land Pride and Bushhog brand mowers.

    I’ve done business with H&R- they were straight up with me and my experiences were positive. Also I would have chosen the BushHog as well.
  26. dusty3030

    Tractor News Bad boy compact tractors?

    Bad Boy isn't manufacturing those tractors. Kukje manufactures the tractor in Korea. Bad Boy uncrates and assembles them.
  27. dusty3030

    Massey Ferguson GC2300 Need Advice on Loading on trailer

    Have you tried shorting the starter solenoid directly to the starter in order to crank it? It's dangerous in that you are bypassing any and all safeties and you can start it in gear, but you can start the tractor.
  28. dusty3030

    Sunflowers are showing out

    6 plus/ minus acres. They are in full stride now.
  29. dusty3030

    Drowning in yard waste- how to dispose?

    Down here, we'd burn it. Where you are you certainly can't so that stinks. I would think that there would be a landscape service with a large vacuum truck perhaps you could hire to suck up the pile and haul it off.
  30. dusty3030

    Alternative to EA 55 Inch Wicked Root Rake Grapple ?

    Totally agree that there are plenty of good heavy duty grapples out there. I agree its irritating to have to pay and wait. If I needed a grapple for a skid steer, track loader or a similarly capable big tractor I'd likely not order from EA. The original poster as well as many of us on this...
  31. dusty3030

    Alternative to EA 55 Inch Wicked Root Rake Grapple ?

    That Titan is an imported unit. It is not made in the US. I picked mine up from them directly and all they have is a warehouse and a website. It is soft steel and doesn’t compare to the EA one. I can say this because I bought the titan first trying to get a bargain. It bent easily and I had to...
  32. dusty3030

    Alternative to EA 55 Inch Wicked Root Rake Grapple ?

    Steel is going through the roof and in our industry (auto parts and supplies) we are seeing price increases roughly monthly. The EA wicked is a hell of a grapple and you get what you pay for.
  33. dusty3030

    Intermittent 4WD NX5010

    Coincidence- those just grease the pivot point of the front axle housing
  34. dusty3030

    Need ideas on moving a 10’x25’x50’ pole barn

    If you push up on the trusses from below you're to likely just destroy them / rip them loose. They have strength from a load pushing down as they are sitting on top, not vice versa.
  35. dusty3030

    Intermittent 4WD NX5010

    There is what is called the modulate valve assembly on the right side under the cab. If you follow the two hydraulic lines that come out of the pump one goes to the loader SCV and the other goes further back to the modulate valve. The valve that activates the 4wd and the valve that activates...
  36. dusty3030

    JD 790

    According to JD Parts, no draft control.
  37. dusty3030

    Is RM43 the correct product?

    Yes that would be a great product for what you describe. It is just glyphosate with imazapyr. I would add just follow the label on rates and how to apply. This isn't a "more is better". The Imazapyr can travel through a root system and it will smoke a tree if your not careful. The RM43 is not...
  38. dusty3030

    Cab for allergy suppression?

    Hate that the first reply was a troll. Yes factory JD cab is a Godsend if you have allergies. It will stay as tight and clean as the effort you put into maintenance. Yes there are lots of openings but they will all have boots / grommets to seal them. Just check them every once in awhile and...
  39. dusty3030

    Backhoe KB 2465 hydraulic stabilizers arms lose pressure KB2465

    Double pilot check valves would solve it.
  40. dusty3030

    Is there a new grease shortage around the corner??????

    Berryman's is in Arlington, TX. Absolutely no connection between their B12 Chemtool branded products and the grease manufacturer Chemtool, just a coincidence in names.
  41. dusty3030

    EPA attempting to limit Internal Combustion vehicles used for Racing

    Here's the thing. What the EPA is doing isn't going after the high rollers (NASCAR, Indy) - they are going after the grass roots side. More importantly the side of the business that is made up of a whole bunch of blue collar small businesses. They are going after Joe Citizen who always dreamed...
  42. dusty3030

    2WD GMC 2500HD

    Proves this thread is about trucks or lubricants on TBN?
  43. dusty3030

    Reasons for voiding factory warranty?

    No. Installing the hydraulic kits won’t void your warranty.
  44. dusty3030

    2WD GMC 2500HD

    Aw heck if you also have a 4wd Tacoma I wouldn’t think twice about a 2wd 3/4 ton diesel puller.
  45. dusty3030

    2WD GMC 2500HD

    Original poster said Duramax. Another poster got us off on tangent about the transmission.
  46. dusty3030

    2WD GMC 2500HD

    2005 Duramax would be mated to the 5 speed Allison.
  47. dusty3030

    L01 Emissions?

    I had a 4701 - regen every 50 hours or so. I had no problems with it
  48. dusty3030

    Hoping for an affordable solution….

    How is introducing weed seeds with your pasture clippings going to keep weeds down in your garden?
  49. dusty3030

    Help with 1993 Ford 1520

    I have no idea if this is available or anything about this company, just the result of the google search for the original loader for your model. Ford 7108 Loader for sale