Search results

Results 1 to 50 of 154
  1. JoelD

    Dealer no longer

    Tough to be loyal when dealers seem to randomly come and go. With my cars I buy where I can get best price and get serviced locally under warranty. Do my own work post warranty.
  2. JoelD

    New Owner of a Kioti LB2204

    Very nicely done you should be happy and very proud of yourself!! Time to do the “I fixed it dance”. Invaluable experience for sure. I added LED lights to my ROPS, way better than bulbs!!! Super bright and little power draw.
  3. JoelD

    2375 backhoe Leaky Control Valves

    For my nimco the sizes were a bit odd and took me a while to find the right size and compound and durometer.
  4. JoelD

    2002 DK50c Shudder?

    Right guess is the three point bouncing I hear about not sure which machines though?
  5. JoelD

    2375 backhoe Leaky Control Valves

    Backhoe Control Valve https://www.tractorbynet.com/forums/index.php?threads/Backhoe-Control-Valve.405581/
  6. JoelD

    2375 backhoe Leaky Control Valves

    Search for the word Nimco and you’ll find the post
  7. JoelD

    2375 backhoe Leaky Control Valves

    I’ve replaced every seal in my spool valves more than once in my backhoe. Search and you’ll find threads on the topic. Don’t use factory replacements. I’m sure there’s a Manual as I have for mine.
  8. JoelD

    2008 kioti ck25hst no start , just clicks

    Bad connection on negative cable to frame will do same thing. Put voltmeter on, turn key, voltage dropped to nothing. In my case negative battery cable. The cable in the end corroded from inside out. Search posts and you’ll see this as a common theme particularly with age of your machine.
  9. JoelD

    2008 kioti ck25hst no start , just clicks

    Remove the ground cable from frame. Use sand paper and clean up the frame and cable to be sure you have clean connection between frame and cable. I’ve had that problem numerous times. Finally replaced cable. Your machine is that age.
  10. JoelD

    The Little Tractor that could, CK2510

    Nicely done. I can’t dig two feet without hitting 10 of those. That is some awesome looking soil!!
  11. JoelD

    Tires do not spin

    Odd it will stall with brakes and not under load with no tire spin. Rims spinning in tire sounds like it would explain it. Any other reason why brakes would stall machine and load would not. Wouldn’t relief valve kick in regardless to avoid stall?
  12. JoelD

    Kioti CK3510SE HST - How The Hell Do I Engage the Locking Diff?

    Good luck with the machine. 30 seconds sounds like fuel delivery to me. Right to make dealer’s problem not yours
  13. JoelD

    Oversized cylinders on my ck2510

    With regards to flow and pressure, pressure can also be limited by motor, in other words if lucky, motor stalls prior to failure. In this case with big hydraulic cyls 2500 psi is plenty of pressure to destroy the tractor. And if you didn’t increase relief valve you’ll not exceed 2500 psi...
  14. JoelD

    Buying Advice Kioti LK3054

    My LK3054XS is frame mount and I really like the design and super strong And tight to the machine. Level ground helpful as stated I crib mine when off the machine. Joel
  15. JoelD

    Oversized cylinders on my ck2510

    I’d be super concerned about front axle, bearings, cv joints, etc. big money once broken. Not to be a Debbie downer but fork lifts have their place as you know and SCUTS have their place.
  16. JoelD

    Help me diagnose a hydraulic issue with my loader

    Excellent point on the valve body having no internal seals on the spools. Just inbetween the sections and top and bottom of spools. I’ve replaced every top and bottom seal on all spools. In my case I’ll was making to atmosphere and polling in bottom cups and actuating the cyl once enough oil...
  17. JoelD

    Valve adjustment at 800 hour service for Kioti DK45S

    Thanks all, good info Vance. I’ll likely be checking mine this winter. Did on wife’s crv, wasn’t difficult. Just a bit of patience. Did on my 50cc scooter as well.
  18. JoelD

    Kioti CK3510SE HST - How The Hell Do I Engage the Locking Diff?

    One of the great things about the people on this forum is they may give you a ribbing on occasion but will always answer your question and provide advice in the process.[emoji16]
  19. JoelD

    Help me diagnose a hydraulic issue with my loader

    Hmmm, could be a couple things. Seals in cyl for sure or seals in valve body. I’ve replaced both in my backhoe. I wish they sold seal kits for the cylinders.
  20. JoelD

    Brand new KIOTI dead on arrival

    Excellent idea on the credit card bit. Not sure they take as payment but would be great way to at least send a more meaningful warning shot. Super frustrating
  21. JoelD

    MT125 Quote

    Unusual to see Kubota less than another. super quality machines for sure.
  22. JoelD

    MT125 Quote

    When buying cars and offered incentive with financing I’ll finance make one payment then pay off with no prepayment penalty. Ironic that sellers have no interest in cash sales (no pun intended).
  23. JoelD

    Buying Advice Opinions on B7100

    I had an earlier b6000E. The old kubotas are indestructible. Just check on parts availability.
  24. JoelD

    Can ls dealers refuse warranty work on tractor not purchased from them??

    Honestly I’d just go with another brand. Ridiculous this crap about I won’t service what I don’t sell. Then you shouldn’t be able to hang brand shingle, simple as that. Looking forward to post COVID and post free money and buyer leverage coming back. They’ll be eager for the sales and work...
  25. JoelD

    Backhoe Help! New Kioti CX 2510 backhoe KB 2465

    Can also help to post pics of your bits in question. For me my how is locked with pins. In order to get my boom pin in and out I literally need to push against a tree to get pin free. Maybe newer machines have latches now versus pins.
  26. JoelD

    FEL cyl leak

    Not chrome, but I’ve replaced a number of seals and O-rings
  27. JoelD

    CK2510 seat redo

    Better than new!! I need the same done! I need to find a great upholsterer
  28. JoelD

    Left front axle bevel gear housing

    I’d start with dealer. I spent a ton of time trying to source seals through Alibaba and eBay and Banggood and the like and just ended up at dealer. Some seals are a fraction of the dealer cost while others are similarly priced.
  29. JoelD

    CX2510 issue at the dealer

    I’ve found uses for my trenching bucket. Easier digging depending on what your doing also use with my thumb for lifting stuff
  30. JoelD

    Cutting Edge for FEL Bucket

    I bolted on my cutting edge so I could more easily reverse and replace. Drilling the holes in the bucket was fun. Thankful for my 1/2 inch heavy duty drill with side handle and drill doctor!
  31. JoelD

    Grading Source for box blade ripper replacement teeth

    Thanks guys, I took hard look at agri and their’s look just like my original. I’ll check out eBay.
  32. JoelD

    Grading Source for box blade ripper replacement teeth

    3/4inch shanked woods box blade Bought replacement teeth on amazon, super light duty. Looking for source for heavy duty teeth Much appreciated Joel
  33. JoelD

    DK 35 No power to dash, no start, battery good, batt connection good

    Like others have said I’d trace from bat to switch then from switch so on and so forth. Also, I’d check on batt voltage when you turn the key My gremlins have all been the negative ground including ground wire to frame and even bad ground wire itself. Corroded within.
  34. JoelD

    Problem trying to reinstall BH on CX2510

    I would think if using the loader provided the fraction of an inch required and nothing is loose then I’d be comfortable with that. As long as nothing changes with use.
  35. JoelD

    Lb 1914 fan belt

    I’d go with dealer. Then bring to auto shop and use as template to get spares
  36. JoelD

    Need a picture from someone with a LK30 or LK3054

    Yes time for fuel filter change [emoji16]
  37. JoelD

    FEL Loose Plate Brand new Kioti 6010

    Personally I’d not be alarmed Loader designed for up and down strength not side to side. That amount of play does not look like it would in any way impair the loader. If you feel as though significantly more play than other brackets could always all dealer for replacement bracket. Possible...
  38. JoelD

    LK3054 Power steering disassembly

    [emoji20] Sorry it’s all I have.
  39. JoelD

    LK3054 Power steering disassembly

    Let me know if you need something different
  40. JoelD

    LK3054 Power steering disassembly

    I’ll look also. I have shop manual lk3054XS
  41. JoelD

    New Kioti Leaking Oil.

    Maya!! Omg I love her work! An amazing woman! I can listen to her recite her work for hours. She’s missed big time. Read about her, I’m thinking she wouldn’t lose much sleep over a cracked valve or anything else for that matter. She overcame and became a legend. Awesome quote, thanks for...
  42. JoelD

    New Kioti Leaking Oil.

    Hoping you don’t bail, this is a great forum and would be cool if you stayed around long enough to play forward the help others have given you. No need to take your anger out on the forum Will be good when your machine is fixed Be safe and respect the machine and all will be good Joel
  43. JoelD

    New Kioti Leaking Oil.

    That sucks!! Good before they left!
  44. JoelD

    Kioti rearend fluid

    For my machine the hydraulic oil lubricates rearend and brakes. Only oils I have are engine oil (10w40 diesel rated)front end (diff and axles) 80/90 and hydraulic (general purpose whatever is least expensive).
  45. JoelD

    New Kioti Leaking Oil.

    Interesting, coobie has 5.5k posts and you’ve got 45. From what I can see every one of your posts is a post asking for some sort of help. I’m just guessing when I say 80% plus of coobie’s posts are offering users some sort of help or answers. Ironically coobie is offering some sound advice...
  46. JoelD

    Need Advice

    Totally get your point. For me I try to avoid issues if I can find them. My only point was I’d rather a non emission machine than an emissions machine. Sort of like avoiding a Ford Fiesta automatic with the dual clutch trans which seems to have been nothing but trouble so I got a manual...
  47. JoelD

    Need Advice

    If me I’d avoid a regen machine like the plague. Seems like when there’s issues it is with regen. I’m happy I’ve got an old machine without the emissions.
  48. JoelD

    LK 3054 parts cracked shift cover

    How did you do that? I’m guessing there’s other damage as well.
 
Top