Search results

Results 1 to 41 of 41
  1. TN8Man

    NX4510 hydraulic dipstick

    Make sure to have the tractor on level ground and lower the front end loader and rear three point hitch to get the best reading.
  2. TN8Man

    RX6620 hydraulic oil question

    I always use TRAVELLER Premium Universal Tractor Trans/Hydraulic Fluid. $30 for 5 gallons. If you see what most dealers will put in your tractor you will stop paying $$$ for fluids. BTW, my dealer told me Kioti has no problems with customers using non Kioti recommended fluids and filters as...
  3. TN8Man

    NX50HST Calibration Issue

    From what I can see, yes. The tech followed a calibration procedure from the manual. Possibly the HST Forward/reverse pedal calibration.
  4. TN8Man

    NX50HST Calibration Issue

    No charge. It's under warranty. The tech just followed steps in the manual so I probably could have done it myself. Now I know but as long as I'm under warranty I will probably just call for the tech.
  5. TN8Man

    NX50HST Calibration Issue

    Was mowing on a uphill and all a sudden the tractor bolted forward like a bat out of hell and when I applied the brakes the rpms went down and died when the tractor stopped. It was like the tractor HST changed into a manual transmission without a clutch pedal. Then when I restarted in neutral I...
  6. TN8Man

    New member

    Welcome from Tennessee!
  7. TN8Man

    Rev (RPM) Limiter?

    Yes, the Kioti engine utilizes a governor system.
  8. TN8Man

    Operating the backhoe

    It would be foolish to not put the tractor in neutral and lock the brakes when leaving the drivers seat with the engine running. The tractor could start moving.
  9. TN8Man

    Ck3510 hst brush hogging

    I mow in M all the time and on very hot and humid days on 15+ degree hillsides with the a/c on for hours on end.
  10. TN8Man

    Aftermarket stereo install in an NX cab

    I installed a mechless (no CD) BT/USB/AUX receiver that is very light and shallow. I just installed just like you would in a car with the included cage. I mainly wanted phone, radio and mp3 music streaming to the unit. The thing I didn't expect was that I can still connect to my wifi router...
  11. TN8Man

    Kioti size help

    You also have another Kioti dealer within your reach in Murfreesboro. They have been known to have some pretty decent package deals.
  12. TN8Man

    Kioti size help

    I have the NX50 and it does everything you list and more, like stump grinding.
  13. TN8Man

    How happy are you?

    I like my Kioti a lot. It does everything I need.
  14. TN8Man

    New Kioti DK4210SECAB

    If you want a grapple then you would probably want the 3rd function switch.
  15. TN8Man

    Should I cab or not. Getting ready to buy

    Upper Cumberland here and lovin' it!
  16. TN8Man

    Should I cab or not. Getting ready to buy

    Yup, and middle Tennessee also has them. Much worse than bees or wasps.
  17. TN8Man

    Should I cab or not. Getting ready to buy

    I retired and move to middle Tennessee 9 years ago. The first couple years I didn't need a tractor for my <2 acres but I did need a riding lawnmower and it was brutal during the long hot and humid summer months. Then I bought additional adjoining property and I now needed a tractor. I bought a...
  18. TN8Man

    Hydraulic Oil

    I also use Traveller Premium Universal Tractor Trans/Hydraulic Fluid. Paying for big name brands is just paying more money for the same performance.
  19. TN8Man

    What Oil does your Dealer/Shop use on Your Tractor?

    What tests are performed and which do you feel is most critical? Which rotella formula do you normally use, T5 or T6.
  20. TN8Man

    What Oil does your Dealer/Shop use on Your Tractor?

    Most engine oils sold today meet the oil standards listed in our tractors requirements. Buying and using engine oils is more a personal preference based on advertisements and hearsay rather than real technical data.
  21. TN8Man

    What Oil does your Dealer/Shop use on Your Tractor?

    My local tractor dealer/shop did my initial 50 hour service and now it time for my next oil change but I'm going to do it. So I called my local shop to order my oil filter and I decided to check their prices on engine oil and their recommendation, I was planning to use Rotella T6. They told me...
  22. TN8Man

    Need Advice

    The CK3510 is a good tractor. I had one and never had an issue with it.
  23. TN8Man

    Wheel bolt problems

    Yes, this is a known issue and I was told by my dealer to check them as part of the normal pre-operation inspection/check.
  24. TN8Man

    NX5010 tach not working

    The frequency will be 481Hz at 850 rpm, 566Hz at 1000 rpm, 1133Hz at 2000 rpm and 1700Hz at 3000 rpm. A dvm without a frequency counter will not work but you might be able to measure the average DC voltage of around 6.5V The pickup sensor might have come loose from the engine gear case.
  25. TN8Man

    NX5010 HST Transmission model

    Does anyone have the model number of the transmission on the NX5010HST? thanks
  26. TN8Man

    NX 5010HST Cab reverse intermittent and jerky

    I checked my hydro temp (just below the fill cap) and I'm reading about 210F when my reverse starts to stop working and I get jerky pulses on my hydro system like the finish mower quickly moving up/down about a half inch every 10-15 minutes. I then opened the hydro fill cap and this is what I...
  27. TN8Man

    NX 5010HST Cab reverse intermittent and jerky

    I had my reverse get squirrely (intermittent jerking) after a long day of bush hogging last year and eventually it stopped working all together. The dealer (not where I bought it) picked it up and returned it saying it's fixed. Then a few weeks ago it started all over again, another long day...
  28. TN8Man

    Storage Length needed for Kioti NX5010 HST CAB with Loader/Bucket?

    Anyone know minimum storage space needed for the Kioti NX5010 HST CAB with Loader/Bucket? I plan to keep the tractor in a barn but not sure if I have enough free space. I can get the height and width from the Kioti site but they don't list length with loader and bucket.
  29. TN8Man

    Back Hoe and possibly cab

    I have the ck3510H and looking at adding the back hoe. I think the price is going to be ~7-8K as I will also need rear hydraulics. Then there is the thumb option which could add another 2k. I noticed a used newer ck3510HSE (mine is not the SE model) for sale at a local dealer that already has...
  30. TN8Man

    Best mower for steep terriain?

    It would have to be an autonomous lawn mower and one beefy enough to replace a bush hog. Unmanned ground vehicle I could modify a UGV to include a cutting deck. I would keep the 9 mm Uzi, Anti-Personnel/Obstacle Breaching System (APOBS) though ... you never know when it might come in handy.
  31. TN8Man

    Would a 1025R make a better lawnmower on hilly terrain than a x758?

    Would a 1025R make a better lawnmower on hilly terrain than a x758? I looking for a new lawnmower and see the 1025R with just a mower deck might cost about the same as a x758.
  32. TN8Man

    Best mower for steep terriain?

    I have about 6 acres of hilly terrain with some pretty steep areas. I currently have a JD 445 that has been working well the past 5 years but the engine is nearing end of life. I was thinking about investing in getting the 445 fixed but then I could just sell it and use the proceeds for an...
  33. TN8Man

    Which code reader?

    I'm looking for a code reader that can be used on all my vehicles which includes a 97 JD 445 lawn tractor, 2017 Kioti ck3510, 97 Jeep Wrangler, 2003 Dodge Ram, 2007 Honda Accord and a 2007 Honda T60 outboard. Looking for one that displays live data and most of the latest handy capabilities...
  34. TN8Man

    JD 445 burning oil

    I have a JD 445 that I bought 5 years ago. The engine goes through a cup or so of oil every 2-3 times I use it on my 5 acres. It smokes pretty good when going up hill. I planned on rebuilding the engine or getting a replacement once the performance started becoming an issue. I think I'm at that...
  35. TN8Man

    A Question for Sailors

    Did the reports you read also say the USS McCain had a back-up steering system but they did not use it? Did it say the USS McCain ran into the merchant vessel? Look at the damage to the USS McCain. Who ran into who? Official: USS John McCain Lost Steering Control Before Crash A U.S. Navy...
  36. TN8Man

    Good tie-down locations in a new ck35

    Where are good front and back tie-down locations for a new ck35? I need to trailer my ck35 over I40 for about 100 miles. Thanks
  37. TN8Man

    Computer Security

    We all have one thing common, tractors :thumbsup: But we also have another thing in common, computers (including smart phones and tablets) to communicate with our members on TBN. We maintain and protect our investment in tractors and we do the same for computers. So I was just curious what...
  38. TN8Man

    CK3510 / CK4010

    For the ck3510HST, Isn't it located on top of the engine, mounted on a bracket? Made by Delphi, pn# F8600-26102 From Paige Tractors Delphi DCM Light Duty Diesel Engine Controller Series
  39. TN8Man

    Want pallet forks for ck35

    I've been removing cedar trees from my property. I already have a large (>25 trees) and growing pile of tree parts and I'm just getting started. Here is some examples. Some trees are less than 10" diameter and are easy to pull out of the ground (root ball) with the tractor. But some are...
  40. TN8Man

    Want pallet forks for ck35

    I'm looking at buying pallet forks attachment for my ck35. So far I found the Titan 48" forks the best deal at $500 with free shipping and a 5% discount for first time buyer (first item ordered) at Titan attachments. This is their non HD product. I will probably still have to pay state tax since...
  41. TN8Man

    New guy

    Hello all! New member here from Tennessee. I recently bought my first tractor to help maintain some new property I purchased. It's a new Kioti 3510HST and so far has worked out very well. Hope to learn from this forum as well as contribute. So far I've been bush hogging the land as well as...