Search results

Results 1 to 50 of 91
  1. F

    Robin Subaru 22hp question

    I have a 22hp Robin Subaru from my PT-422. It was rebuilt before I bought it several years ago. Do you think this motor is good for any other application? I know when I replaced it with a 25hp Kohler I had to cut the shaft on the Kohler. My guess the Robin Subaru was cut as well. The 22 hp...
  2. F

    How many buckets equal one yard

    I have a PT-422 with I believe is the regular dirt bucket. How many of these full buckets is equivalent to one yard? Thanks Frank
  3. F

    Black Widow Spiders

    While moving firewood into my basement yesterday, I came across some healthy Black Widows living in my wood pile. Any known way to get rid of these unwanted spiders? Thanks Frank Happy Thanksgiving to All!
  4. F

    Loose wheel / hub on PT-422

    I was moving a couple cords of wood yesterday and noticed my front left wheel with a wobble. It appears the hub is loose. I just replaced the hubs less than 20 hours ago. Any idea what I may have done wrong the last time I changed them to have one go again. Thanks Frank
  5. F

    Tubes vs Tubeless

    What are the pros and cons to using innertubes in your tires versus tubeless? I put a new tire on an old wheel and now have a slow leak. I have taken it off and clean and light sanded the wheel. Looks like I will put a tube in it and be done with it. Frank
  6. F

    Stump Grinder for PT-425

    Hi, I have read oodles of posts on various stump grinder threads. Was hoping to see a video of one in action. The problem I am having with mine is that if I put the least amount of pressure on the blade to the stump it (the blade) will stop immediately. The rotation on the blade is spinning...
  7. F

    Wheel Hubs

    Less than a year ago, I replaced all my wheel hubs. The other day, while driving in reverse I noticed a clunking noise. No noise while driving forward. Brought it in the garage and jacked the rear end up. Wiggled the left rear wheel, unbelievable amount of play. Took off the wheel. I...
  8. F

    Saw a Power Trac PT-425 today

    While driving through Woodstown NJ today, I saw someone trailering a PT-425. It is the first time I have seen one other than my 422 and another I looked at in Maryland. I wish they were more common.
  9. F

    Lifting height 422 vs 425

    The 425 has eight more inches in lifting height than the 422. What is different between the two? Is it in the cylinders? Do they have the same FEL? I could use a few more inches on my 422. Thanks Frank
  10. F

    Question about bolts from engine to engine stand

    I noticed a vibration coming from my engine. Shut it down. Let it cool off. Shook the engine and noticed it was loose. Checked the four bolts from the engine to the stand and all four were loose. I retighten all four, but am not sure if they are the right bolts. Called Terry at Power Trac...
  11. F

    Mounting weight to back end of 422

    Looking to mount weight to the back end of my PT-422 to help keep it grounded when lifting with the bucket or forks. Have any of you did this before? Pictures please! Thanks Frank
  12. F

    Gas in my oil

    Couple months ago I installed new 25hp Kohler in my 422. My Dad was in a very serious car accident 2 months ago so the tractor has been parked since then. I leave the hood up when I am not using the tractor. I noticed gas level dropping a little. I have a valve under the gas tank and before...
  13. F

    Lubing 422

    Not all of the areas that call for lubing on my 422 have grease fittings. What is the best way to lube with out fittings?
  14. F

    Swapping Robin out with Kohler today

    Cut the shaft today. Surprisingly very easy with hack saw and new blade. I took my time. It took about 20 minutes. Happy with the way it turned out.
  15. F

    Swapping Robin out with Kohler today

    I bought a set of Crow Feet from Sears today. It won't budge! I have very little room. Afraid I am going to break off the nipple on the tank. It is the bottom hose closest to the tub wall.
  16. F

    Swapping Robin out with Kohler today

    The one hose coming off the oil cooler is a piece of cake to swap out, however the second looks like it is going to be a real headache. In the front lower left hand corner of the tub there is a manifold of hoses that tie into the reservoir. This hose appears to be on the bottom row under these...
  17. F

    Swapping Robin out with Kohler today

    I believe this is a solenoid. It has a red wire that goes to the starter. Was wondering where I can find a replacement. It is attached to the inside of the of the tub by the starter. Thanks Frank
  18. F

    Swapping Robin out with Kohler today

    I pulled the 22hp Robin out today. Engine stand is unbolted, however the right rear wheel motor hydraulic line runs through the middle of the stand. Looks as though I will have to disconnect line at wheel motor and pull it through to get the engine stand out. The two hydraulic lines from the...
  19. F

    Swapping Robin out with Kohler today

    Getting ready to pull the 22hp Robin and install 25 actually 23.5hp Kohler in 422. So far I have the muffler off, battery out, gas tank and bracket out, throttle and choke cables disconnected, battery cables disconnected. Terry had said to loosen the bolt engine bolts. Then I can slide the...
  20. F

    Thoughts on PT-422 Changing out Subaru 22hp to Kohler 25hp

    What are your thoughts on this? Since Power Trac will not sell a new PT-425 with a Kohler engine, I was playing with the idea of changing out my 22hp Subaru to a 25hp Kohler. I have seen online a few sites where 25hp Kohlers are under $2000. With the current setup on my 1999 PT-422, I have...
  21. F

    PT-425 at auction today

    I went to the auction in Denver, Pa that had the PT-425. It was a clean machine, low hours many attachments and trailer. It had the 25 hp Kohler. It started right up every time. I did bid on it up to $12,500, however there was a low reserve at $17,000 that we didn't know about until the...
  22. F

    Ignition Switch

    Lately when I go to start my PT-422, it will click two or three times like a dead battery then it will start to turn over and start. Is that a sign that the ignition switch is starting to go bad. If so does anyone have a part number and source for a new one. Thank you, Frank
  23. F

    Source for hydraulic cooler fan

    I need to replace my hydraulic cooler fan for my pt-422. Anyone know a good source for replacement? thanks, Frank
  24. F

    Really dislike Robin Subaru engines

    All winter with the new silicon heater my PT-422 would start right up. Lately in 70 to 90 degree weather forget it. I refuse to use starting fluid, tired of setting valves and changing plugs. Decided not to buy a new PT-425 for the sole reason I do not like these Robin Subaru engines. Put a...
  25. F

    Poll. Subaru vs Kohler

    If Power-Trac offered a Kohler engine along with their Robin Subaru, what motor would you choose?
  26. F

    Adding weight to the back end

    Have any of you found a good way to add weight to the back end of a 422 or 425?
  27. F

    New 425 question

    Curious, PT is offering a 28hp Robin/Subaru Fuel Injected motor for $500 more. Would you do it or stick with the 25hp carb R/S engine? What are the pros and cons to going FI? Thanks Frank
  28. F

    Sold my Steiner 420, now looking to sell my PT-422

    I sold my Steiner 420 with FEL yesterday. Bitter sweet feeling. I really like that tractor and didn't get the money I had hoped to get for it. Now I am trying to sell my PT-422. My goal is to eventually by a PT-425. If anyone is interested in a 1999 PT-422. I have one. 22 hp Robin Subaru...
  29. F

    Developing Treadle Problem

    Today while plowing snow my treadle started making a slight noise. The noise has gotten worse. It is a clanking noise and only does it while moving forward or reverse. Not familiar with treadles. What should I be looking for? has far as being broken or maintenance. thanks Frank
  30. F

    Using your PT to make money

    Looking for ways to use my PT to help generate more income while getting more seat time. Any ideas?
  31. F

    Facebook

    Power Trac is now on Facebook. They have put up a few cool pictures and an old TV spot. Check them out.
  32. F

    PowerTrac Cold Weather Heaters....

    It is the KAT 24250 silicone heater. I found it on Amazon. I believe it is a 250 watt.
  33. F

    Tweel

    https://www.youtube.com/watch?v=UYZWL1ngS5E
  34. F

    I want to buy a new 425 this year but ...

    I am leery about the Subaru engines. I haven't seen many posts from later model PT-425 users. Maybe that is a good thing because they aren't having problems with their machines. I wish there were late model users on here to gauge how satisfied the owners are with their machines. I bought my...
  35. F

    Engine backfiring

    Yesterday I was mowing lawn with my old Dixie Chopper. I got stuck in some mud. Grabbed a chain and my 422. When I started to pull the Dixie out, my 422 started rapidly backfiring. It has done this before. I thought maybe it was running on one cylinder so I pulled a plug wire to see if it...
  36. F

    Lights

    Looking to replace the lights on my 422. I have looked on Surplus Center. Have any of you changed out your lights? Anyone using LEDs?
  37. F

    New Starter for 422

    Couldn't be more happier!!!!! Total time removing and replacing starter was 2 1/2 hours. The two 1/2" holes worked perfectly. I didn't have to take any hydraulic lines apart or lift the motor. I did try to move the lest rear wheel motor, but that nut was/is frozen on there, even with a lot of...
  38. F

    New Starter for 422

  39. F

    New Starter for 422

    I have a 1999 PT-422 with a rebuilt Robin 22hp engine. Engine has been running good and strong. Just starting seems to be its biggest problem, even in the warmer temperatures. How difficult is it to change out the starter? I am not sure I can fit my hands into the tub where the starter is to...
  40. F

    Best way to sell a tractor on eBay

    I want to sell my Steiner tractor on eBay, but am not sure what is the best way to list it. If I start it with no reserve, I have the risk of selling too cheap. What do you think the best way to list it?
  41. F

    Attachment Carts

    Went to Harbor Freight, spent $16.99 for a dolly. Had some 2x4's laying around. Made a very useful cart for my trencher. Works nice.
  42. F

    Attachment Carts

    Looking to make some carts for my attachments. I have some of the smaller ones on moving carts. It makes it real nice to move them around my garage with out using the tractor. Trying to figure out a way to make one for the wheel trencher. It is too tall and top heavy. any suggestions
  43. F

    Adjusting Idle

  44. F

    Adjusting Idle

    The idle on my 22hp Robin seems to be running fast at its lowest setting. I backed the set screw all the way out and with the throttle decreased all the way, the engine still seems like it is running fast. I have not messed with the springs. I looked on YouTube for a video on how to adjust...
  45. F

    1568 International Harvester

    Looking for an exhaust manifold for a 1568 International Harvester. Any information where I can locate one would be greatly appreciated. Thanks, Frank
  46. F

    Vibratory Plow

    My uncle has helped me make a pretty nice vibratory plow for my PT-422. It will bury wire at about eight inches. We are still looking for more speed for the vibratory plow. I talked to Terry on Friday. On my 422 I have a two section pump. He said one section runs the PTO, the other section...
  47. F

    Compression Test on PT-422

    I checked the compression on my PT-422 22hp Robin. On the left side I got 135psi. On the right side I got 145 psi. I couldn't find the specs for the compression on Robin's website. Does anyone know or have any information on where the compression for this engine should be? Thanks Frank
  48. F

    PT-429

    Several years ago there was a 422 owner that swapped out his 22hp Robin with a 29hp liquid cooled Kawasaki. I remember reading after seven hours on the machine the tran pump went and he just gave up on it. I remember he said it would start right up in zero degree weather and had much more...
  49. F

    Late model PT-425 users out there?

    Thinking about selling my 1999 PT-422 and buying a new PT-425. Would like to get some feedback from owners that have 2010 tractors and newer. Are they any better starting in the cold? Things you like and things you don't like. Thanks, Frank
  50. F

    Steiner / Ventrac attachments quick plate?

    You think a quick attach plate could be modified to accept steiner and ventrac attachments?
 
Top