Search results

Results 1 to 25 of 25
  1. DUMBDOG

    Hydraulic pump

    This last June while hooking up the plow to the three point my L4630GSTC was idling and it just picked up about a 100 rpm's. After that the shifter no longer shifted, three point did not work, loaded did not work and the PTO acted like it worked but did not turn. It is still sitting there as I...
  2. DUMBDOG

    L model cab door replacement

    Just replaced a cab door on my L4630GSTC due to breakage(do not ask). Remove the hinges from the cab, install the hinges, support and opener in the glass after installing the new exterior weather stripping. Reinstall the door on the cab and it is done. Total time takes a little over an hour...
  3. DUMBDOG

    Air conditioner broke at 805 Hours

    Started the Kubota today and heard a loud squealing sound. Traced it down to the one way clutch on the air conditioner compressor. To add a lot of insult to the injury, this small part sells for $375.00. I feel that the part should have lasted much more than 805 hours and two and one half...
  4. DUMBDOG

    L series cab heating and air

    I have a L4630GSTC that is a little over two years old and has over seven hundred hours on it. It is a great tractor, has plenty of power and with the 24-16 transmission, it can go slow enough for the transplanter. Last year, when we had a day of 114 degree weather, I stopped and checked the...
  5. DUMBDOG

    New twist on Home Depot and Lowe's

    On December 19, stopped at Home Depot for a carpet for some offices that I am redoing. Seemed like great service. After that went to Menard's to pick up a couple of items. Phone rings, it is Home Depot wanting me to sign some forms, told them I would be in the next day. Stop by the next day...
  6. DUMBDOG

    Steering Wheel Shock

    Purchased my 1630 in 1998. Steering shock went bad in about 2002-2003? Lived with the floppy wheel for a while. Replaced it 2004. Was going to adjust the wheel yesterday, and it just stayed loose again and is flopping up and down. Why does New Holland keep putting out garbage that they know...
  7. DUMBDOG

    SHOW US YOUR CHICKEN COOP

    I have seen posts to show your outhouse, hats, etc. Now how about a picture of your chicken coop? This picture was taken in 1994, the last year it was used was in 1970. Do not know when it was built, best guess is between the 1920's to the 1930's. The attachment on the right is a goose shed.
  8. DUMBDOG

    NEIGHBORS AND LOT LINES

    Seeing all these posts about neighbors and what they do or try to do and with lot line disputes etc, I decided to share how I handled my situation. In 1996, purchased a house and thirty acres at auction. The acreage was completely fenced in and I was told by the seller that the fence was his...
  9. DUMBDOG

    Grease Zerk Removal

    Last year a three point arm came off and broke off a grease zerk with no way to grab the threads. How does one remove the threads to install a new zerk?
  10. DUMBDOG

    FLORIDA FLYWHEELERS

    On the farm, we had a M with a wide front end, at the time I am sure that it was in good shape compared to what there are in now.
  11. DUMBDOG

    Fuel Transfer Tank

    This spring I purchased a 100 gallon steel transfer tank and pump. It ran dry on Saturday, filled it up on Sunday and tried to hand pump some diesel into the tractor as it was on empty. After about fifty or so pumps, nothing comes out. Check the literature that came with the pump and it was...
  12. DUMBDOG

    Sod House

    On the way up to my home town today to place flowers on the graves for Memorial Day, some of my siblings and I stopped at this sod house. One on my great uncles and his wife lived in it up until about 25-30 years ago when they moved into town, it was in a lot better shape then it is now. The...
  13. DUMBDOG

    Super UDT Pricing

    Just picked up some Super UDT for the 50 hour. The price was $51.51 for a 2 1/2 gallon jug. Is this in line what others are paying?
  14. DUMBDOG

    Deer wins over tire

    For the past four to five years I have averaged 2 flats per year on my NH1630, thought it was due to the turf tires losing to sticks, branches, etc. After fixing another flat on the NH last night, figured that would be it for the year, however when we going to hook up the bucket on the Kuobota...
  15. DUMBDOG

    4630GSTC Speedometer Calibration

    We are back up north and starting to till the garden. Before we left had a 4630GSTC delivered and puttered around for a while before we left, noticed a tag on the hand throttle about the speedometer. Tonight I checked it and when the delivered the tractor they had not calibrated the...
  16. DUMBDOG

    Cannot log in, but fixed it.

    While on the forum this evening, I noticed that I could not go to My Home, kept logging in, but nothing. About the same time my pop up blocker kept kicking in. Went and changed the settings on both the pop up blockers and signed in again, everything normal again. This was during the course...
  17. DUMBDOG

    Scam type private message

    Just received the following PM <font color="blue"> From: belalawson Hello Naturally it may interest you that i am Bela Lawson from Rep of Benin in west africa. can i trust you as i am just 22 years old but want to invest on tractor business . I need your full trust and...
  18. DUMBDOG

    L4630GSTC Delivered

    The tractor was delivered the last week of December. Took it down the driveway a couple of times and parked it.
  19. DUMBDOG

    Plow pulling capacity

    Several weeks ago, ordered a 4630GSTC for my truck garden. It came in last week but they are still waiting for the quick attach for the loader, but picked up the manual today. Under the attachment specifications, it shows a 14X2 for the moldboard plow. Has anyone had any experience in...
  20. DUMBDOG

    L4630GSTC

    Just went to the dealer and ordered one. L4630GSTC, Ag tires, 2 dentent rear valves and rear float valve for a total of 3, draft control, rear work lights, rear wiper kit, radio mounting kit, block heater, freight and prep. Total came to 31,200. Think I could have done a little bettor...
  21. DUMBDOG

    Seeders Air Seeder

    Does anyone have any experiences with the small air seeders for large gardens suitable for pulling behind a compact tractor? Thanks.
  22. DUMBDOG

    Tilt Steering parts cost

    Just priced out the gas shock for the tilt steering on my 1630 Boomer. The price 167.95. Granted the tractor is five years old, but at 275 hours, it works out to about 60 cents an hour for a feature that I never really used. It really gets to be a pain trying to steer with the steering wheel...
  23. DUMBDOG

    HTP AMERICA-WELDERS/PLASMA CUTTERS

    Has anyone purchased or have a welder or plasma cutter from HTP America. Experiences, good or bad?
  24. DUMBDOG

    ANOTHER RECOUNT!

    Well, for some reason the great state of Florida is going to have another recount. Reno has just demanded a manual recount of the entire state. Did the state just switch to computors?
  25. DUMBDOG

    BUFFALO PRICE

    Just purchased a buffalo (bison) for the table. Price was $350.00. Hanging weight 400-500#. Of course at this price it is still on the hoof. Have had extensive hunting experience, deer hunter for 30 years and couple of elk. Debating doing this myself or taking it to a locker plant. Has...
 
Top